{"product_id":"afe-takeda-momentum-cold-air-intake-system-with-pro-5r-filter-for-2013-2017-hyundai-veloster-1-6l-part-number-56-70028r","title":"aFe Takeda Momentum Cold Air Intake System with Pro 5R Filter for 2013–2017 Hyundai Veloster 1.6L, Part Number 56-70028R","description":"Momentum’s innovative filter-to-housing interface was built to feature the largest air filter possible. This 7-1\/2” tall 360-degree radial flow air filter features a 4\" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and\/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. Its auxiliary air inlet can be used to bring in additional air from the engine compartment, or can be closed with an included plug. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.\nTakeda Momentum Cold Air Intake System w\/ Pro 5R Filter Hyundai Veloster 13-17 L4-1.6L (t)\n\u003cul\u003e\n  \u003cli\u003eInnovative Filter-to-Housing Interface and minimal hardware for fast and easy installation\u003c\/li\u003e\n  \u003cli\u003eClear sight window for convenient Filter Inspection without disassembly\u003c\/li\u003e\n  \u003cli\u003eWashable and reusable Pro 5R Air Filter for Maximum performance\u003c\/li\u003e\n  \u003cli\u003eSealed Housing capture cool air directly behind front grille\u003c\/li\u003e\n  \u003cli\u003eDyno-proven gains up to +14 HP \u0026amp; +12 Lbs. x Ft. TQ\u003c\/li\u003e\n  \u003cli\u003eOut flows factory air intake by 69%\u003c\/li\u003e\n  \u003cli\u003eMeasured Flow: 330 CFM @7” H2O\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUpgrade the air intake performance of your 2013–2017 Hyundai Veloster with the aFe Takeda Momentum Cold Air Intake System, part number 56-70028R. Designed for vehicles equipped with the 1.6L four-cylinder engine, this direct-fit system replaces the restrictive factory intake while using factory mounting points for a straightforward installation. No cutting or permanent modifications are required.\u003c\/p\u003e\n\u003cp\u003eThe system features a sealed, heat-resistant cross-linked polyethylene housing that draws cool air from behind the front grille and helps reduce heat soak. Its patent-pending filter-to-housing interface minimizes the number of components for easier assembly. A clear sight window allows convenient filter inspection without disassembly, while the auxiliary air inlet can be used to introduce additional engine-compartment air or sealed with the included plug.\u003c\/p\u003e\n\u003cp\u003eThe washable and reusable Pro 5R air filter uses five progressively finer layers of pre-oiled cotton gauze media and a 360-degree radial-flow design for high airflow. The inverted top increases usable filter surface area, helping support longer service intervals. aFe reports dyno-proven gains of up to 14 horsepower and 12 lb.-ft. of torque, along with airflow measured at 330 CFM at 7 inches of water and up to 69% greater flow than the factory intake. The system is intended for street or track use. All required clamps, couplings, hardware, and the auxiliary inlet plug are included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Fits 2013, 2014, 2015, 2016, and 2017 Hyundai Veloster models with the 1.6L four-cylinder engine. This product is not CARB approved; verify local emissions requirements before installation. California Proposition 65 warnings may apply.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDirect-fit design uses factory mounting points and requires no cutting or permanent modifications.\u003c\/li\u003e\n\u003cli\u003eSealed XLPE housing helps capture cooler air behind the front grille while resisting heat soak.\u003c\/li\u003e\n\u003cli\u003eWashable and reusable Pro 5R filter uses five layers of pre-oiled cotton gauze media for high airflow and filtration.\u003c\/li\u003e\n\u003cli\u003eDyno-proven performance delivers gains of up to 14 horsepower and 12 lb.-ft. of torque, with airflow measured at 330 CFM at 7 inches of water.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\nFitments:\u003cbr\u003e\n2013 Hyundai Veloster Turbo\u003cbr\u003e\n2014 Hyundai Veloster Turbo\u003cbr\u003e\n2014 Hyundai Veloster Turbo R-Spec\u003cbr\u003e\n2015 Hyundai Veloster Turbo\u003cbr\u003e\n2015 Hyundai Veloster Turbo R-Spec\u003cbr\u003e\n2016 Hyundai Veloster Rally Edition\u003cbr\u003e\n2016 Hyundai Veloster Turbo\u003cbr\u003e\n2016 Hyundai Veloster Turbo R-Spec\u003cbr\u003e\n2017 Hyundai Veloster Turbo\u003cbr\u003e\n2017 Hyundai Veloster Turbo R-Spec\u003cstyle\u003etable.productattributes, .productattributes td { border-bottom: 1px solid #ddd; border-collapse: collapse; padding: 2px; text-align: left; }\u003c\/style\u003e\n\u003ctable class=\"productattributes\"\u003e\n\u003cthead\u003e\u003ctr\u003e\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd\u003eAir Freight Prohibited: false\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eNot Carb Approved: true\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eCarb Acknowledgement Required: true\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eLtl Freight Required: false\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eProp 65: Y\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003ePart Type: automotive\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eEpa: N\/A\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eRegular Stock: t\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eUnits Per Sku: 1\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cbr\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":67593220522236,"sku":"56-70028R","price":376.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/6518\/3740\/files\/190a52b9d7613d180c94e1775731dcfb.jpg?v=1790529824","url":"https:\/\/diycustoms.store\/products\/afe-takeda-momentum-cold-air-intake-system-with-pro-5r-filter-for-2013-2017-hyundai-veloster-1-6l-part-number-56-70028r","provider":"diycustoms.store","version":"1.0","type":"link"}