{"product_id":"afe-takeda-momentum-pro-5r-cold-air-intake-system-part-number-56-70025r-for-2019-2020-nissan-altima-2-5l","title":"aFe Takeda Momentum Pro 5R Cold Air Intake System, Part Number 56-70025R, for 2019–2020 Nissan Altima 2.5L","description":"Momentum’s innovative filter-to-housing interface was built to feature the largest air filter possible. This 7-1\/2” tall 360-degree radial flow air filter features a 3-1\/2\" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and\/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The one-piece sealed housing, constructed of heat-resistant XLPE (cross-linked polyethylene) polymer, features our patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. Its auxiliary air inlet is used to bring in additional air from the engine compartment. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system. The silicone bellows coupling absorbs excessive engine movement and is flexible for a secure and easy install.\nTakeda Momentum Cold Air Intake System w\/ Pro 5R Filter Nissan Altima 19-25 L4-2.5L\n\u003cul\u003e\n  \u003cli\u003eInnovative Filter-to-Housing Interface and Minimal Hardware for Fast and Easy Installation (Roughly 30 Minutes)\u003c\/li\u003e\n  \u003cli\u003eOne-Piece Housing Captures Air Directly from Scoop and Auxiliary inlet\u003c\/li\u003e\n  \u003cli\u003eWashable and Reusable Pro 5R Air Filter for Maximum Performance\u003c\/li\u003e\n  \u003cli\u003eDyno-Proven Gains up to +7 HP and +9 Lbs. x Ft. TQ\u003c\/li\u003e\n  \u003cli\u003eMeasured Flow: 245 CFM @ 7\" H20\u003c\/li\u003e\n  \u003cli\u003eOutflows Factory Intake by 17%\u003c\/li\u003e\n  \u003cli\u003eDyno Tuned Air Intake Tube\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUpgrade the airflow and performance of your 2019–2020 Nissan Altima with the aFe Takeda Momentum Pro 5R Cold Air Intake System, part number 56-70025R. Designed for the 2.5L four-cylinder engine, this direct-fit intake system combines a dyno-tuned intake tube with a high-flow, washable, and reusable Pro 5R air filter. The pre-oiled filter uses five progressively finer layers of cotton gauze media to support increased airflow for street and track applications.\u003c\/p\u003e\n\u003cp\u003eThe one-piece XLPE polymer housing is engineered to resist heat soak while capturing air from the factory scoop and auxiliary inlet. Its patent-pending filter-to-housing interface reduces the number of components for a straightforward installation using factory mounting points, with no cutting or permanent modifications required. A clear sight window allows convenient filter inspection without removing the intake system, while the silicone bellows coupling accommodates engine movement for a secure fit.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh-Flow Filtration:\u003c\/strong\u003e Pro 5R five-layer cotton gauze media supports maximum airflow and is washable and reusable.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProven Performance:\u003c\/strong\u003e Dyno testing demonstrates gains of up to 7 horsepower and 9 pound-feet of torque in applicable configurations.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eImproved Airflow:\u003c\/strong\u003e Flows 245 CFM at 7 inches of water and outflows the factory intake by 17 percent.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeat-Resistant Design:\u003c\/strong\u003e The XLPE housing helps limit heat soak while drawing air from the scoop and auxiliary inlet.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDirect-Fit Installation:\u003c\/strong\u003e Uses factory mounting points and requires no cutting or modifications.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEasy Serviceability:\u003c\/strong\u003e The clear inspection window simplifies filter monitoring and maintenance.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDurable Coupling:\u003c\/strong\u003e The flexible silicone bellows coupling helps accommodate engine movement and simplify installation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOptimized Intake Tube:\u003c\/strong\u003e The computer-designed, dyno-tuned tube is engineered for strong airflow and fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Product Specifications and Technical Data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBrand: aFe Takeda\u003c\/li\u003e\n  \u003cli\u003ePart Number: 56-70025R\u003c\/li\u003e\n  \u003cli\u003eProduct Type: Cold air intake system\u003c\/li\u003e\n  \u003cli\u003eFilter Media: Pre-oiled Pro 5R cotton gauze\u003c\/li\u003e\n  \u003cli\u003eFilter Design: 360-degree radial flow with inverted top\u003c\/li\u003e\n  \u003cli\u003eFilter Flange: 3-1\/2 inches\u003c\/li\u003e\n  \u003cli\u003eMeasured Flow: 245 CFM at 7 inches of water\u003c\/li\u003e\n  \u003cli\u003eVehicle Application: 2019–2020 Nissan Altima with 2.5L four-cylinder engine\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e One-piece XLPE intake housing, Pro 5R air filter, dyno-tuned intake tube, silicone bellows coupling, clamps, couplings, mounting hardware, and installation components.\u003c\/p\u003e\n\u003cp\u003eThis aFe Takeda Momentum intake system fits applicable 2019–2020 Nissan Altima models equipped with the 2.5L four-cylinder engine. Verify vehicle-specific fitment before ordering. This product is not CARB approved and may not be legal for use on pollution-controlled vehicles in certain states or regions. California customers should review applicable emissions requirements before installation.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHigh-flow Pro 5R five-layer cotton gauze air filter\u003c\/li\u003e\n\u003cli\u003eDyno-proven gains of up to 7 horsepower and 9 pound-feet of torque\u003c\/li\u003e\n\u003cli\u003eMeasured airflow of 245 CFM at 7 inches of water\u003c\/li\u003e\n\u003cli\u003eOutflows the factory intake by 17 percent\u003c\/li\u003e\n\u003cli\u003eHeat-resistant one-piece XLPE housing\u003c\/li\u003e\n\u003cli\u003eDirect-fit installation using factory mounting points\u003c\/li\u003e\n\u003cli\u003eClear filter inspection window for simplified maintenance\u003c\/li\u003e\n\u003cli\u003eDyno-tuned intake tube with flexible silicone bellows coupling\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\nFitments:\u003cbr\u003e\n2019 Nissan Altima Platinum\u003cbr\u003e\n2019 Nissan Altima S\u003cbr\u003e\n2019 Nissan Altima SL\u003cbr\u003e\n2019 Nissan Altima SR\u003cbr\u003e\n2019 Nissan Altima SV\u003cbr\u003e\n2020 Nissan Altima Platinum\u003cbr\u003e\n2020 Nissan Altima S\u003cbr\u003e\n2020 Nissan Altima SL\u003cbr\u003e\n2020 Nissan Altima SR\u003cbr\u003e\n2020 Nissan Altima SV\u003cbr\u003e\n2021 Nissan Altima Platinum\u003cbr\u003e\n2021 Nissan Altima S\u003cbr\u003e\n2021 Nissan Altima SL\u003cbr\u003e\n2021 Nissan Altima SR\u003cbr\u003e\n2021 Nissan Altima SV\u003cbr\u003e\n2022 Nissan Altima Platinum\u003cbr\u003e\n2022 Nissan Altima S\u003cbr\u003e\n2022 Nissan Altima SL\u003cbr\u003e\n2022 Nissan Altima SR\u003cbr\u003e\n2022 Nissan Altima SV\u003cbr\u003e\n2023 Nissan Altima S\u003cbr\u003e\n2023 Nissan Altima SL\u003cbr\u003e\n2023 Nissan Altima SR\u003cbr\u003e\n2023 Nissan Altima SV\u003cbr\u003e\n2024 Nissan Altima S\u003cbr\u003e\n2024 Nissan Altima SL\u003cbr\u003e\n2024 Nissan Altima SR\u003cbr\u003e\n2024 Nissan Altima SV\u003cbr\u003e\n2025 Nissan Altima S\u003cbr\u003e\n2025 Nissan Altima SL\u003cbr\u003e\n2025 Nissan Altima SR\u003cbr\u003e\n2025 Nissan Altima SV\u003cstyle\u003etable.productattributes, .productattributes td { border-bottom: 1px solid #ddd; border-collapse: collapse; padding: 2px; text-align: left; }\u003c\/style\u003e\n\u003ctable class=\"productattributes\"\u003e\n\u003cthead\u003e\u003ctr\u003e\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd\u003eAir Freight Prohibited: false\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eNot Carb Approved: true\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eCarb Acknowledgement Required: true\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eLtl Freight Required: false\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eProp 65: Y\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003ePart Type: automotive\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eEpa: N\/A\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eRegular Stock: t\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eUnits Per Sku: 1\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cbr\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":67593019490556,"sku":"56-70025R","price":376.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/6518\/3740\/files\/91250f5ca925d8c935fdbadf89bd3168_b6407e0e-1acf-4eaf-8075-7c20e27bc3b7.jpg?v=1790527686","url":"https:\/\/diycustoms.store\/products\/afe-takeda-momentum-pro-5r-cold-air-intake-system-part-number-56-70025r-for-2019-2020-nissan-altima-2-5l","provider":"diycustoms.store","version":"1.0","type":"link"}