{"product_id":"dei-black-glass-fiber-exhaust-wrap-1-inch-x-50-feet-part-number-10107","title":"DEI Black Glass Fiber Exhaust Wrap, 1 Inch x 50 Feet, Part Number 10107","description":"Glass Fiber Exhaust Wraps solve the problem of extreme underhood heat and improve exhaust system performance. Wrapping headers and down pipes is an important first step in reducing unwanted and power-robbing under hood heat. Less under hood heat results in a cooler air charge for improved performance and keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density \u0026amp; increases exhaust flow. Design Engineering Stainless Steel Locking Ties are the perfect way to fasten exhaust wrap for a easy, clean and professional installation.  Reduce under hood temperatures a realistic 50% Decreases exhaust density \u0026amp; increases exhaust flow Improves horsepower Withstands 1200°F direct\/2000°F radiant Only exhaust wrap with installation guide lines Added durability and heat retention   NOTE:  Catalytic Convertors: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor \u0026amp; Tunnel Shield II(TM). Removal: Exhaust wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Titanium Exhaust Pipe Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields.\nOne 50 foot roll of 1 inch wide Black Glass Fiber exhaust wrap.\nGlass Fiber Exhaust Wraps solve the problem of extreme underhood heat and improve exhaust system performance. Wrapping headers and down pipes is an important first step in reducing unwanted and power-robbing under hood heat. Less under hood heat results in a cooler air charge for improved performance and keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density \u0026amp; increases exhaust flow. Design Engineering Stainless Steel Locking Ties are the perfect way to fasten exhaust wrap for a easy, clean and professional installation. Reduce under hood temperatures a realistic 50% Decreases exhaust density \u0026amp; increases exhaust flow Improves horsepower Withstands 1200F direct\/2000F radiant Only exhaust wrap with installation guide lines Added durability and heat retention NOTE: Catalytic Convertors: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor \u0026amp; Tunnel Shield II(TM). Removal: Exhaust wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Titanium Exhaust Pipe Systems: DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields.\nUniversal\n\u003cul\u003e\n  \u003cli\u003eWithstands 1200 Degrees F Direct\/2000 Degrees F Radiant\u003c\/li\u003e\n  \u003cli\u003eReduce Under Hood Temperatures a Realistic 50 Percent\u003c\/li\u003e\n  \u003cli\u003eDecreases Exhaust Density And Increases Exhaust Flow\u003c\/li\u003e\n  \u003cli\u003eOnly Exhaust Wrap With Installation Guide Lines\u003c\/li\u003e\n  \u003cli\u003eAdded Durability And Heat Retention\u003c\/li\u003e\n  \u003cli\u003eImproves Horsepower\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDEI Glass Fiber Exhaust Wrap is designed to manage extreme underhood heat while supporting improved exhaust system performance. Part Number 10107 includes one 50-foot roll of black, 1-inch-wide exhaust wrap for headers and downpipes. By helping retain heat within the exhaust system, the wrap can reduce exhaust gas density and support increased exhaust flow, while lowering heat in the engine compartment for a cooler intake air charge.\u003c\/p\u003e\u003cp\u003eThis DEI exhaust wrap withstands temperatures up to 1,200 degrees F direct and 2,000 degrees F radiant. Integrated installation guidelines help promote consistent coverage and a clean, professional installation. Stainless steel locking ties are recommended for securing the wrap, although ties are not included. The universal design is suitable for many automotive exhaust applications and can help improve durability, heat retention, and horsepower potential.\u003c\/p\u003e\u003cp\u003eDo not wrap catalytic converters, as excessive heat may reduce converter service life. Exhaust wrap should not be installed on flex pipes or flex joints because it is not designed for removal after heat cycling and may lose its initial flexibility once heated. DEI also does not recommend wrapping titanium exhaust systems because retained heat can make thin titanium alloys brittle and more prone to cracking. For titanium systems, use a suitable flexible heat shield instead. This product is not CARB approved and carries a California Proposition 65 warning.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOne DEI black glass fiber exhaust wrap roll\u003c\/li\u003e\n\u003cli\u003eInstallation guide lines integrated into the wrap\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFitment\u003c\/h3\u003e\u003cp\u003eUniversal automotive fitment. Intended for headers, downpipes, and other compatible exhaust components. Verify application requirements before installation.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeat Resistance: Withstands up to 1,200 degrees F direct heat and 2,000 degrees F radiant heat.\u003c\/li\u003e\n\u003cli\u003eUnderhood Heat Reduction: Can reduce underhood temperatures by a realistic 50 percent when properly installed.\u003c\/li\u003e\n\u003cli\u003eExhaust Flow Support: Helps retain exhaust heat, decrease exhaust gas density, and support increased exhaust flow.\u003c\/li\u003e\n\u003cli\u003eDurable Installation: Glass fiber construction with printed installation guidelines promotes consistent coverage and added heat retention.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstyle\u003etable.productattributes, .productattributes td { border-bottom: 1px solid #ddd; border-collapse: collapse; padding: 2px; text-align: left; }\u003c\/style\u003e\n\u003ctable class=\"productattributes\"\u003e\n\u003cthead\u003e\u003ctr\u003e\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd\u003eAir Freight Prohibited: false\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eNot Carb Approved: false\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eLtl Freight Required: false\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eProp 65: Y\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003ePart Type: automotive\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eEpa: N\/A\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eCarb Acknowledgement Required: false\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eRegular Stock: t\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eUnits Per Sku: 1\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cbr\u003e","brand":"DEI","offers":[{"title":"Default Title","offer_id":67652094329084,"sku":"10107","price":59.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/6518\/3740\/files\/166bb61906743d7980885bf6cf2a36d8.jpg?v=1791224887","url":"https:\/\/diycustoms.store\/products\/dei-black-glass-fiber-exhaust-wrap-1-inch-x-50-feet-part-number-10107","provider":"diycustoms.store","version":"1.0","type":"link"}