{"product_id":"dinan-g8x-matte-carbon-fiber-cold-air-intake-for-bmw-m2-m3-m4-2021-2023","title":"Dinan G8x Matte Carbon Fiber Cold Air Intake for BMW M2\/M3\/M4 (2021-2023)","description":"Equal parts function, sound, and beauty, the intake not only looks and sounds the part of something special but performs the part as well. With a 12% increase in airflow to the engine without any negative effects on inlet temperatures or pressure, the Dinan G8x system delivers on all fronts. Drawing in more unimpeded air for consumption yields more efficient turbos (less work to make the same power) with the capacity for greater power potential on modified builds. Central to the design and our obsessive-compulsive need for a symmetrical engine bay is a singular plenum that replaces the separated driver and passenger intake ducting on the stock setup. The combination of the two tracks into one enlarged and distinctive shared pathway allows 50% more volume to be achieved in this tight space in addition to simplifying the installation and improving the overall look. The center plenum gives way to enlarged airboxes that house 11% larger cotton air filters delivering superb filtration while maximizing flow. Feeding the filters are the factory grill inlets as well as additional cutouts on the top of each airbox lid. The semi-open design was analyzed extensively to ensure that these additional inlets had no ill effect on temperatures or flow. However, the secondary airbox passages do allow an avenue for the induction soundtrack to escape the confines of its former plastic prison for everyone's benefit. Whether under hard acceleration, deceleration, or just spooling the amplified sounds are sure to make an impression.\nMatte Carbon Fiber - G80\/G82\/G83\/G87\nOEM M4 CSL \u0026amp; M3 CS strut brace is not compatible with the Dinan intake.\n\u003cul\u003e\n  \u003cli\u003eLarger volume air boxes (26% larger than stock) and tubes\/plenum (50% larger than stock) allowing an increased volume of air to be utilized\u003c\/li\u003e\n  \u003cli\u003eReduced intake restriction for Increased turbo efficiency with greater power potential on modified builds\u003c\/li\u003e\n  \u003cli\u003eMultiple finish options: Available in 2x2 Gloss or Matte Twill Carbon (Matte Twill shown)\u003c\/li\u003e\n  \u003cli\u003eMore Flow: 12.4% increase over stock system (Stock: 815 CFM, Dinan: 916 CFM @ 28\" H2O).\u003c\/li\u003e\n  \u003cli\u003e11% increase in filter area (stock: 65in², Dinan: 72in² per side) for optimum flow\u003c\/li\u003e\n  \u003cli\u003eMore robust and aggressive induction soundtrack\u003c\/li\u003e\n  \u003cli\u003eImproved throttle response\u003c\/li\u003e\n  \u003cli\u003eBolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Dinan G8x Matte Carbon Fiber Cold Air Intake combines exceptional performance, sleek aesthetics, and enhanced sound for your BMW M2, M3, or M4. Designed to increase airflow by 12% over the stock system, this intake improves turbo efficiency and unlocks greater power potential, especially on modified builds. Its innovative design features a single, enlarged plenum that replaces the factory separate ducting, providing 50% more volume in a compact space. This shared pathway not only optimizes airflow but also simplifies installation and enhances the engine bay’s appearance with a clean, symmetrical layout. The intake system includes large airboxes housing 11% bigger cotton air filters, offering superior filtration and maximized flow. These airboxes are fed through factory grill inlets and additional top-mounted cutouts on the lids, ensuring unrestricted airflow while maintaining temperature control. The semi-open design allows the induction sound to escape, delivering a more aggressive and engaging engine soundtrack during acceleration, deceleration, or spool-up. Constructed from premium matte carbon fiber, the intake offers a durable, lightweight finish that complements the vehicle's sporty aesthetic. It is available in multiple finish options, including 2x2 Gloss and Matte Twill Carbon, allowing for customization to match your vehicle’s style. The system's increased airflow capabilities, with a 12.4% gain over stock, translate into improved throttle response and a more robust induction sound, elevating your driving experience. Installation is a straightforward bolt-on process, making it accessible for enthusiasts and professional installers alike. Please note that this intake is not compatible with the OEM M4 CSL \u0026amp; M3 CS strut brace. Designed specifically for 2021 through 2023 BMW M models, this intake elevates both the performance and aesthetic appeal of your vehicle, delivering a more dynamic driving experience with a sleek, aggressive look.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eLarger volume air boxes (26% larger than stock) and plenum (50% larger than stock) for increased airflow\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReduced intake restriction enhances turbo efficiency and power potential on modified builds\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAvailable in multiple finishes: 2x2 Gloss or Matte Twill Carbon (Matte Twill shown)\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e12.4% increase in airflow over stock system (Stock: 815 CFM, Dinan: 916 CFM @ 28\" H2O)\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003e11% larger filter area (stock: 65 sq in, Dinan: 72 sq in per side) for optimal flow\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEnhanced induction sound delivers a more aggressive engine note\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eImproved throttle response for a more responsive driving experience\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBolt-on installation for easy upgrades\u003c\/li\u003e\u003c\/ul\u003e\u003cbr\u003e\nFitments:\u003cbr\u003e\n2021 BMW M3 Base\u003cbr\u003e\n2021 BMW M3 Competition\u003cbr\u003e\n2021 BMW M4 Base\u003cbr\u003e\n2021 BMW M4 Competition\u003cbr\u003e\n2022 BMW M3 Base\u003cbr\u003e\n2022 BMW M3 Competition\u003cbr\u003e\n2022 BMW M3 Competition xDrive\u003cbr\u003e\n2022 BMW M4 Base\u003cbr\u003e\n2022 BMW M4 Competition\u003cbr\u003e\n2022 BMW M4 Competition xDrive\u003cbr\u003e\n2023 BMW M2 Base\u003cbr\u003e\n2023 BMW M3 Base\u003cbr\u003e\n2023 BMW M3 Competition\u003cbr\u003e\n2023 BMW M3 Competition xDrive\u003cbr\u003e\n2023 BMW M4 Base\u003cbr\u003e\n2023 BMW M4 Competition\u003cbr\u003e\n2023 BMW M4 Competition xDrive\u003cbr\u003e\n2023 BMW M4 CSL\u003cbr\u003e\n2024 BMW M2 Base\u003cbr\u003e\n2024 BMW M3 Base\u003cbr\u003e\n2024 BMW M3 Competition\u003cbr\u003e\n2024 BMW M3 Competition xDrive\u003cbr\u003e\n2024 BMW M4 Base\u003cbr\u003e\n2024 BMW M4 Competition\u003cbr\u003e\n2024 BMW M4 Competition xDrive\u003cbr\u003e\n2025 BMW M2 Base\u003cbr\u003e\n2025 BMW M3 Base\u003cbr\u003e\n2025 BMW M3 Competition\u003cbr\u003e\n2025 BMW M3 Competition xDrive\u003cbr\u003e\n2025 BMW M4 Base\u003cbr\u003e\n2025 BMW M4 Competition\u003cbr\u003e\n2025 BMW M4 Competition xDrive\u003cbr\u003e\n2026 BMW M2 Base\u003cbr\u003e\n2026 BMW M3 Base\u003cbr\u003e\n2026 BMW M3 Competition\u003cbr\u003e\n2026 BMW M3 Competition xDrive\u003cbr\u003e\n2026 BMW M4 Base\u003cbr\u003e\n2026 BMW M4 Competition\u003cbr\u003e\n2026 BMW M4 Competition xDrive\u003cstyle\u003etable.productattributes, .productattributes td { border-bottom: 1px solid #ddd; border-collapse: collapse; padding: 2px; text-align: left; }\u003c\/style\u003e\n\u003ctable class=\"productattributes\"\u003e\n\u003cthead\u003e\u003ctr\u003e\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd\u003eAir Freight Prohibited: false\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eNot Carb Approved: true\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eCarb Acknowledgement Required: true\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eLtl Freight Required: false\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eProp 65: Y\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003ePart Type: automotive\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eEpa: N\/A\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eRegular Stock: t\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eUnits Per Sku: 1\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cbr\u003e","brand":"Dinan","offers":[{"title":"Default Title","offer_id":50978730934524,"sku":"D760-0063-B","price":1849.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/6518\/3740\/files\/c20ff7a25aeb7a5280dee77943ade6bbL.jpg?v=1786677524","url":"https:\/\/diycustoms.store\/products\/dinan-g8x-matte-carbon-fiber-cold-air-intake-for-bmw-m2-m3-m4-2021-2023","provider":"diycustoms.store","version":"1.0","type":"link"}