{"product_id":"k-n-engineering-57-2582-performance-cold-air-intake-kit-for-2011-2015-ford-f-250-super-duty-6-7l-v8","title":"K\u0026N Engineering 57-2582 Performance Cold Air Intake Kit for 2011-2015 Ford F-250 Super Duty 6.7L V8","description":"A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.\nK\u0026amp;N's roto-molded cold air intake systems are guaranteed to provide an increase in horsepower and torque, and are protected by the K\u0026amp;N No-Hassle Lifetime Limited Warranty.\nAssociated products: RC-5282 Universal Clamp-On Air Filter, 99-5000 Filter Care Service Kit Aerosol\n\u003cul\u003e\n  \u003cli\u003eK\u0026amp;N Million Mile Limited Warranty\u003c\/li\u003e\n  \u003cli\u003eWill not void vehicle warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBrief Description:\u003c\/strong\u003e The K\u0026amp;N Engineering 57-2582 Performance Cold Air Intake Kit is designed for select 2011-2015 Ford F-250 Super Duty models equipped with the 6.7L V8 engine. Its high-density polyethylene rotationally molded tube increases airflow volume to the engine, helping deliver a guaranteed improvement in horsepower and torque. A custom heat shield helps reduce exposure to hot engine-bay air, while the system is typically installable in less than 90 minutes.\u003c\/p\u003e\n\u003cp\u003eThe intake includes an oversized, conical K\u0026amp;N High-Flow Air Filter made with washable, reusable oiled cotton filter media. Under normal highway driving conditions, the filter can provide service intervals of up to 100,000 miles. The K\u0026amp;N 57-2582 is backed by the K\u0026amp;N Million Mile Limited Warranty and is designed not to void the vehicle warranty. This application is EPA compliant and carries California Air Resources Board Executive Order D-269-57. Check vehicle and emissions requirements before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Product Specifications \u0026amp; Technical Data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: K\u0026amp;N Engineering\u003c\/li\u003e\n\u003cli\u003ePart Number: 57-2582\u003c\/li\u003e\n\u003cli\u003eProduct Type: Automotive performance cold air intake kit\u003c\/li\u003e\n\u003cli\u003eVehicle Application: Select 2011-2015 Ford F-250 Super Duty models\u003c\/li\u003e\n\u003cli\u003eEngine Application: 6.7L V8 diesel\u003c\/li\u003e\n\u003cli\u003eFilter Type: Washable and reusable oiled cotton high-flow air filter\u003c\/li\u003e\n\u003cli\u003eEmissions Compliance: EPA compliant and CARB approved under EO D-269-57\u003c\/li\u003e\n\u003cli\u003eWarranty: K\u0026amp;N Million Mile Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included in the Box:\u003c\/strong\u003e Rotationally molded HDPE intake tube, oversized conical high-flow air filter, custom heat shield, intake hardware, and installation components. Associated service products include the RC-5282 Universal Clamp-On Air Filter and 99-5000 Filter Care Service Kit Aerosol.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Fits select 2011-2015 Ford F-250 Super Duty trucks with the 6.7L V8 engine. Verify the exact model year, engine configuration, emissions certification, and application before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHigh-Flow Airflow Design: The rotationally molded HDPE intake tube increases airflow volume to the engine for improved horsepower and torque potential.\u003c\/li\u003e\n\u003cli\u003eWashable Reusable Filter: The oversized conical oiled cotton filter can be cleaned and reused, with service intervals of up to 100,000 miles under normal highway driving conditions.\u003c\/li\u003e\n\u003cli\u003eEngine-Bay Heat Protection: A custom heat shield helps isolate incoming air from high temperatures within the engine compartment.\u003c\/li\u003e\n\u003cli\u003eWarranty and Emissions Compliance: Backed by the K\u0026amp;N Million Mile Limited Warranty, designed not to void the vehicle warranty, and approved under CARB Executive Order D-269-57.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\nFitments:\u003cbr\u003e\n2011 Ford F-250 Super Duty King Ranch\u003cbr\u003e\n2011 Ford F-250 Super Duty Lariat\u003cbr\u003e\n2011 Ford F-250 Super Duty XL\u003cbr\u003e\n2011 Ford F-250 Super Duty XLT\u003cbr\u003e\n2011 Ford F-350 Super Duty King Ranch\u003cbr\u003e\n2011 Ford F-350 Super Duty Lariat\u003cbr\u003e\n2011 Ford F-350 Super Duty XL\u003cbr\u003e\n2011 Ford F-350 Super Duty XLT\u003cbr\u003e\n2012 Ford F-250 Super Duty King Ranch\u003cbr\u003e\n2012 Ford F-250 Super Duty Lariat\u003cbr\u003e\n2012 Ford F-250 Super Duty XL\u003cbr\u003e\n2012 Ford F-250 Super Duty XLT\u003cbr\u003e\n2012 Ford F-350 Super Duty King Ranch\u003cbr\u003e\n2012 Ford F-350 Super Duty Lariat\u003cbr\u003e\n2012 Ford F-350 Super Duty XL\u003cbr\u003e\n2012 Ford F-350 Super Duty XLT\u003cbr\u003e\n2013 Ford F-250 Super Duty King Ranch\u003cbr\u003e\n2013 Ford F-250 Super Duty Lariat\u003cbr\u003e\n2013 Ford F-250 Super Duty Platinum\u003cbr\u003e\n2013 Ford F-250 Super Duty XL\u003cbr\u003e\n2013 Ford F-250 Super Duty XLT\u003cbr\u003e\n2013 Ford F-350 Super Duty King Ranch\u003cbr\u003e\n2013 Ford F-350 Super Duty Lariat\u003cbr\u003e\n2013 Ford F-350 Super Duty Platinum\u003cbr\u003e\n2013 Ford F-350 Super Duty XL\u003cbr\u003e\n2013 Ford F-350 Super Duty XLT\u003cbr\u003e\n2014 Ford F-250 Super Duty King Ranch\u003cbr\u003e\n2014 Ford F-250 Super Duty Lariat\u003cbr\u003e\n2014 Ford F-250 Super Duty Platinum\u003cbr\u003e\n2014 Ford F-250 Super Duty XL\u003cbr\u003e\n2014 Ford F-250 Super Duty XLT\u003cbr\u003e\n2014 Ford F-350 Super Duty King Ranch\u003cbr\u003e\n2014 Ford F-350 Super Duty Lariat\u003cbr\u003e\n2014 Ford F-350 Super Duty Platinum\u003cbr\u003e\n2014 Ford F-350 Super Duty XL\u003cbr\u003e\n2014 Ford F-350 Super Duty XLT\u003cbr\u003e\n2015 Ford F-250 Super Duty King Ranch\u003cbr\u003e\n2015 Ford F-250 Super Duty Lariat\u003cbr\u003e\n2015 Ford F-250 Super Duty Platinum\u003cbr\u003e\n2015 Ford F-250 Super Duty XL\u003cbr\u003e\n2015 Ford F-250 Super Duty XLT\u003cbr\u003e\n2015 Ford F-350 Super Duty King Ranch\u003cbr\u003e\n2015 Ford F-350 Super Duty Lariat\u003cbr\u003e\n2015 Ford F-350 Super Duty Platinum\u003cbr\u003e\n2015 Ford F-350 Super Duty XL\u003cbr\u003e\n2015 Ford F-350 Super Duty XLT\u003cbr\u003e\n2016 Ford F-250 Super Duty King Ranch\u003cbr\u003e\n2016 Ford F-250 Super Duty Lariat\u003cbr\u003e\n2016 Ford F-250 Super Duty Platinum\u003cbr\u003e\n2016 Ford F-250 Super Duty XL\u003cbr\u003e\n2016 Ford F-250 Super Duty XLT\u003cbr\u003e\n2016 Ford F-350 Super Duty King Ranch\u003cbr\u003e\n2016 Ford F-350 Super Duty Lariat\u003cbr\u003e\n2016 Ford F-350 Super Duty Platinum\u003cbr\u003e\n2016 Ford F-350 Super Duty XL\u003cbr\u003e\n2016 Ford F-350 Super Duty XLT\u003cstyle\u003etable.productattributes, .productattributes td { border-bottom: 1px solid #ddd; border-collapse: collapse; padding: 2px; text-align: left; }\u003c\/style\u003e\n\u003ctable class=\"productattributes\"\u003e\n\u003cthead\u003e\u003ctr\u003e\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd\u003eAir Freight Prohibited: false\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eNot Carb Approved: false\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eCarb Eo Number: D-269-57\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eLtl Freight Required: false\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eProp 65: Y\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003ePart Type: automotive\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eEpa: Compliant\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eCarb Acknowledgement Required: false\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eRegular Stock: t\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eUnits Per Sku: 1\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cbr\u003e","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":67596372639996,"sku":"57-2582","price":472.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/6518\/3740\/files\/92be4cc15caa014af2472a7be99c143d.jpg?v=1790578250","url":"https:\/\/diycustoms.store\/products\/k-n-engineering-57-2582-performance-cold-air-intake-kit-for-2011-2015-ford-f-250-super-duty-6-7l-v8","provider":"diycustoms.store","version":"1.0","type":"link"}