{"product_id":"k-n-engineering-69-5322ts-typhoon-performance-air-intake-system-for-2019-2020-kia-forte-and-2020-hyundai-elantra-2-0l","title":"K\u0026N Engineering 69-5322TS Typhoon Performance Air Intake System for 2019–2020 Kia Forte and 2020 Hyundai Elantra 2.0L","description":"The K\u0026amp;N Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system. The restrictive factory air filter and air intake housing are replaced by the K\u0026amp;N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The air intake comes with a black rubber topped K\u0026amp;N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive silver powder-coat finish that's made to last and it accommodates the factory mass air sensor and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake.\nK\u0026amp;N's easy-to-install Typhoon air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tube comes in a silver powder coat finish.\nAssociated products: RC-5284 Universal Clamp-On Air Filter, 99-5000 Filter Care Service Kit Aerosol\n\u003cul\u003e\n  \u003cli\u003e10-Year\/Million Mile Limited Warranty\u003c\/li\u003e\n  \u003cli\u003eK\u0026amp;N Million Mile Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBrief Description:\u003c\/strong\u003e The K\u0026amp;N Engineering 69-5322TS Typhoon performance air intake system replaces the restrictive factory air filter and intake housing with a free-flowing, mandrel-bent aluminum intake tube. Designed to smooth and straighten airflow, this system helps the engine draw in a greater volume of air for improved throttle response, acceleration, and usable power throughout the RPM range.\u003c\/p\u003e\n\u003cp\u003eThe silver powder-coated intake tube is built for long-term durability and accommodates the factory mass airflow sensor and crankcase ventilation hose. A black rubber-topped K\u0026amp;N high-flow cone filter and dedicated heat shield are included to help direct cooler, cleaner air toward the throttle body. The reusable filter can be serviced for up to 100,000 miles, depending on driving conditions, using the appropriate K\u0026amp;N filter care products. Installation is generally completed in 90 minutes or less with common hand tools.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Product Specifications \u0026amp; Technical Data:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBrand: K\u0026amp;N Engineering\u003c\/li\u003e\n  \u003cli\u003ePart Number: 69-5322TS\u003c\/li\u003e\n  \u003cli\u003eProduct Type: Typhoon performance air intake system\u003c\/li\u003e\n  \u003cli\u003eIntake Tube Material: Mandrel-bent aluminum\u003c\/li\u003e\n  \u003cli\u003eIntake Tube Finish: Silver powder coat\u003c\/li\u003e\n  \u003cli\u003eFilter Type: Reusable, high-flow conical air filter\u003c\/li\u003e\n  \u003cli\u003eSensor Compatibility: Accommodates the factory mass airflow sensor\u003c\/li\u003e\n  \u003cli\u003eWarranty: K\u0026amp;N Million Mile Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e Designed for select 2019–2020 Kia Forte applications and 2020 Hyundai Elantra models equipped with a 2.0L four-cylinder engine. Verify the exact vehicle application before ordering. This intake is not CARB approved and may not be legal for sale or use in California or other states that follow California emissions standards. Check applicable emissions regulations and vehicle-specific CARB status before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's Included:\u003c\/strong\u003e Aluminum intake tube, K\u0026amp;N high-flow air filter, heat shield, mounting hardware, and installation components. Associated products include the K\u0026amp;N RC-5284 universal clamp-on air filter and 99-5000 filter care service kit aerosol.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFree-Flowing Airflow: Replaces the restrictive factory intake housing and filter to help reduce airflow restriction and improve engine breathing.\u003c\/li\u003e\n\u003cli\u003ePerformance-Focused Design: Helps deliver a guaranteed power gain with improved acceleration and throttle response across the engine's RPM range.\u003c\/li\u003e\n\u003cli\u003eDurable Aluminum Construction: Mandrel-bent aluminum intake tubing features a long-lasting silver powder-coated finish.\u003c\/li\u003e\n\u003cli\u003eReusable High-Flow Filter: Includes a black rubber-topped K\u0026amp;N cone filter that can provide service intervals of up to 100,000 miles, depending on driving conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\nFitments:\u003cbr\u003e\n2019 Kia Forte EX\u003cbr\u003e\n2019 Kia Forte FE\u003cbr\u003e\n2019 Kia Forte LXS\u003cbr\u003e\n2019 Kia Forte S\u003cbr\u003e\n2020 Hyundai Elantra Limited\u003cbr\u003e\n2020 Hyundai Elantra SE\u003cbr\u003e\n2020 Hyundai Elantra SEL\u003cbr\u003e\n2020 Hyundai Elantra Value Edition\u003cbr\u003e\n2020 Kia Forte EX\u003cbr\u003e\n2020 Kia Forte FE\u003cbr\u003e\n2020 Kia Forte GT-Line\u003cbr\u003e\n2020 Kia Forte LXS\u003cbr\u003e\n2021 Kia Forte EX\u003cbr\u003e\n2021 Kia Forte FE\u003cbr\u003e\n2021 Kia Forte GT-Line\u003cbr\u003e\n2021 Kia Forte LXS\u003cbr\u003e\n2022 Kia Forte FE\u003cbr\u003e\n2022 Kia Forte GT-Line\u003cbr\u003e\n2022 Kia Forte LXS\u003cbr\u003e\n2023 Kia Forte GT-Line\u003cbr\u003e\n2023 Kia Forte LX\u003cbr\u003e\n2023 Kia Forte LXS\u003cbr\u003e\n2024 Kia Forte GT-Line\u003cbr\u003e\n2024 Kia Forte LX\u003cbr\u003e\n2024 Kia Forte LXS\u003cstyle\u003etable.productattributes, .productattributes td { border-bottom: 1px solid #ddd; border-collapse: collapse; padding: 2px; text-align: left; }\u003c\/style\u003e\n\u003ctable class=\"productattributes\"\u003e\n\u003cthead\u003e\u003ctr\u003e\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd\u003eAir Freight Prohibited: false\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eNot Carb Approved: true\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eCarb Acknowledgement Required: true\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eLtl Freight Required: false\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eProp 65: Y\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003ePart Type: automotive\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eEpa: N\/A\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eRegular Stock: t\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eUnits Per Sku: 1\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cbr\u003e","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":67594094379260,"sku":"69-5322TS","price":419.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0641\/6518\/3740\/files\/4eecd93e1eef582be085fb697dfe6358.jpg?v=1790552505","url":"https:\/\/diycustoms.store\/products\/k-n-engineering-69-5322ts-typhoon-performance-air-intake-system-for-2019-2020-kia-forte-and-2020-hyundai-elantra-2-0l","provider":"diycustoms.store","version":"1.0","type":"link"}