aFe - AFE49-48055 - MACH Force-Xp Hi-Tuck Cat-Back Exhaust System

The Hi-Tuck "Rock Basher" Cat-Back Exhaust System is constructed of 2-1/2" mandrel-bent stainless steel tubing. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower, torque and throttle response. This exhaust system also comes complete with a 14" length high-flow straight through designed muffler to absorb high pitch tones producing a powerful sound. All necessary hardware is included for a hassle-free installation. This unit fits with most after market Evap skid plates. This MACH Force-Xp cat-back exhaust system is constructed of 2-1/2" mandrel-bent, 409 stainless steel tubing for maximum flow. The smooth transition bends allow for low turbulence, increasing horsepower, torque and improving throttle response. This system incorporates a high flow 14" length muffler for an aggressive sound. The muffler is located prior to the rear axle for increased climbing angles. This system may have a slight drone in some applications due to the short muffler. This exhaust system is finished off with a Hi-Tuck Tip that is developed to give your Jeep extra clearance during extreme angle climbs or descents. An included extension pipe allows this system to fit both the 2 and 4 door Wranglers without modification. OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time. The 409 stainless steel performance muffler is designed to provide a deep, throaty, powerful sound on acceleration but maintain a smooth sound at idle. The driver-side exit location is perfect for adding on-board air compressor system to the underside of your Jeep. If you are considering an on-board air compressor kit, you need to use this system. Compatible with aFe Power's Glide Guard (46-79001) MACH Force-Xp 2-1/2 IN 409 SS Cat-Back Hi-Tuck Exhaust w/14 IN muffler Jeep Wrangler (JK) 07-18 V6-3.6L/3.8L

• Utilizes a high-flow 409 stainless steel straight through designed muffler
• Comes complete with all necessary hardware for a hassle-free installation
• Features a Hi-Tuck design to provide maximum clearance when off roading
• Uses bayonet style hangers and heavy-duty band clamps for a secure fit
• Constructed out of 2-1/2" mandrel bent stainless steel tubing
• Fits with most aftermarket Evap skid plates
• Single rear exit system

The aFe MACH Force-Xp Hi-Tuck Cat-Back Exhaust System is designed for Jeep Wrangler (JK) applications with 3.6L or 3.8L V6 engines. It uses 2.5-inch mandrel-bent 409 stainless steel tubing and smooth-transition bends to promote efficient exhaust flow, reduce turbulence, and support improved horsepower, torque, and throttle response. The system features a driver-side single rear exit and a Hi-Tuck tip designed to provide additional clearance during extreme-angle climbs and descents.

A 14-inch high-flow, straight-through muffler is positioned before the rear axle for improved climbing clearance. Its 409 stainless steel construction is designed to produce a deep, throaty sound during acceleration while maintaining a smoother tone at idle. Due to the short muffler design, some applications may experience slight exhaust drone. OE-style bayonet hangers, heavy-duty band clamps, and included hardware help maintain a secure pipe position under high-vibration and high-heat conditions.

The included extension pipe allows installation on both 2-door and 4-door Wranglers without modification. This system fits with most aftermarket Evap skid plates and is compatible with aFe Power Glide Guard 46-79001. Fitment data identifies Jeep Wrangler applications from the listed model years with 3.6L and 3.8L V6 engines. Installation hardware is included.

Features:

• Flow-Optimized Construction: 2.5-inch mandrel-bent 409 stainless steel tubing and smooth bends help reduce restriction and turbulence.
• High-Flow Muffler: The 14-inch straight-through muffler supports efficient exhaust flow and delivers a deep, powerful exhaust tone during acceleration.
• Hi-Tuck Design: The muffler is positioned before the rear axle, while the Hi-Tuck tip helps provide additional clearance for off-road angles.
• Secure Installation: OE-style bayonet hangers, heavy-duty band clamps, an extension pipe, and necessary installation hardware are included.
• Tubing Material: 409 stainless steel construction.
• Tubing Diameter: 2.5 inches.
• Muffler Length: 14 inches.
• Exhaust Configuration: Single rear exit with driver-side exit location.
• Vehicle Fitment: Jeep Wrangler (JK) applications with 3.6L or 3.8L V6 engines, including 2-door and 4-door configurations as identified in the fitment data.
• Additional Compatibility: Fits with most aftermarket Evap skid plates and is compatible with aFe Power Glide Guard 46-79001.
• What's Included: Cat-back exhaust components, extension pipe, muffler, Hi-Tuck tip, hangers, clamps, and necessary installation hardware.

Fitments:
2007 Jeep Wrangler Rubicon
2007 Jeep Wrangler Sahara
2007 Jeep Wrangler Unlimited Rubicon
2007 Jeep Wrangler Unlimited Sahara
2007 Jeep Wrangler Unlimited X
2007 Jeep Wrangler X
2008 Jeep Wrangler Rubicon
2008 Jeep Wrangler Sahara
2008 Jeep Wrangler Unlimited Rubicon
2008 Jeep Wrangler Unlimited Sahara
2008 Jeep Wrangler Unlimited X
2008 Jeep Wrangler X
2009 Jeep Wrangler Rubicon
2009 Jeep Wrangler Sahara
2009 Jeep Wrangler Unlimited Rubicon
2009 Jeep Wrangler Unlimited Sahara
2009 Jeep Wrangler Unlimited X
2009 Jeep Wrangler X
2010 Jeep Wrangler Rubicon
2010 Jeep Wrangler Sahara
2010 Jeep Wrangler Sport
2010 Jeep Wrangler Unlimited Rubicon
2010 Jeep Wrangler Unlimited Sahara
2010 Jeep Wrangler Unlimited Sport
2010 Jeep Wrangler Unlimited X
2010 Jeep Wrangler X
2011 Jeep Wrangler 70th Anniversary
2011 Jeep Wrangler Rubicon
2011 Jeep Wrangler Sahara
2011 Jeep Wrangler Sport
2011 Jeep Wrangler Unlimited 70th Anniversary
2011 Jeep Wrangler Unlimited Rubicon
2011 Jeep Wrangler Unlimited Sahara
2011 Jeep Wrangler Unlimited Sport
2012 Jeep Wrangler Rubicon
2012 Jeep Wrangler Sahara
2012 Jeep Wrangler Sport
2012 Jeep Wrangler Unlimited Rubicon
2012 Jeep Wrangler Unlimited Sahara
2012 Jeep Wrangler Unlimited Sport
2013 Jeep Wrangler Rubicon
2013 Jeep Wrangler Sahara
2013 Jeep Wrangler Sport
2013 Jeep Wrangler Unlimited Rubicon
2013 Jeep Wrangler Unlimited Sahara
2013 Jeep Wrangler Unlimited Sport
2014 Jeep Wrangler Rubicon
2014 Jeep Wrangler Sahara
2014 Jeep Wrangler Sport
2014 Jeep Wrangler Unlimited Rubicon
2014 Jeep Wrangler Unlimited Sahara
2014 Jeep Wrangler Unlimited Sport
2015 Jeep Wrangler Rubicon
2015 Jeep Wrangler Sahara
2015 Jeep Wrangler Sport
2015 Jeep Wrangler Unlimited Rubicon
2015 Jeep Wrangler Unlimited Sahara
2015 Jeep Wrangler Unlimited Sport
2016 Jeep Wrangler 75th Anniversary
2016 Jeep Wrangler Rubicon
2016 Jeep Wrangler Sahara
2016 Jeep Wrangler Sport
2016 Jeep Wrangler Sport S
2016 Jeep Wrangler Unlimited 75th Anniversary
2016 Jeep Wrangler Unlimited Rubicon
2016 Jeep Wrangler Unlimited Sahara
2016 Jeep Wrangler Unlimited Sport
2016 Jeep Wrangler Unlimited Sport S
2017 Jeep Wrangler Rubicon
2017 Jeep Wrangler Sahara
2017 Jeep Wrangler Sport
2017 Jeep Wrangler Unlimited Rubicon
2017 Jeep Wrangler Unlimited Sahara
2017 Jeep Wrangler Unlimited Sport
2018 Jeep Wrangler JK Rubicon
2018 Jeep Wrangler JK Sahara
2018 Jeep Wrangler JK Sport
2018 Jeep Wrangler JK Sport S
2018 Jeep Wrangler JK Unlimited Rubicon
2018 Jeep Wrangler JK Unlimited Sahara
2018 Jeep Wrangler JK Unlimited Sport
2018 Jeep Wrangler JK Unlimited Sport S

Air Freight Prohibited: false
Not Carb Approved: false
Carb Acknowledgement Required: true
Ltl Freight Required: false
Prop 65: Y
Part Type: automotive
Epa: N/A
Regular Stock: t
Units Per Sku: 1