aFe Momentum GT Pro 5R Cold Air Intake System for 2016-2017 BMW 340i and 440i B58, Part 54-76309

Unique One-Piece High Quality Housing W/ Auxiliary Inlet: The smooth one-piece (Patent Pending) high quality sealed housing with auxiliary air inlet is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style. Carbon Fiber Trim On Housing: This Momentum GT intake system offers carbon fiber trim on housing to give that motorsport appearance. This cover overlay is constructed of lightweight high gloss, clear-coated 2 x 2 twill-weave carbon fiber. High Quality Tube: This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Large 3-Layer Performance Air Filter: The Momentum GT intake is designed around an oil-free, large 8-3/4" oval 360 degree radial flow performance air filter with 3-layers of progressive finer porosity synthetic media providing maximum convenience. The unique air filter to housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process. Custom High Temp. Silicone Coupling: A custom high temperature reinforced silicone elbow coupling is included for easy install to the factory breather line. Premium Hardware Premium stainless steel clamps are used for strength and durability while also pro viding the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation. Momentum GT Cold Air Intake System w/ Pro 5R Filter BMW 140i/M240i (F22)/340i (F30)/440i (F32) 16-20 L6-3.0L (t) B58

• Pro 5R Oiled 5 Layer Progressively Finer Mesh Cotton Gauze Filter
• No Cutting or Drilling On OEM Parts For Faster Installation
• High Quality 1-Piece Sealed Housing w/Auxiliary Air Scoop
• Built In Sight Window Provides Easy Inspection Of Filter
• Unique Filter-To-Housing Interface For Easy Installation
• Twill-Weave Carbon Fiber Trim On Housing For Styling
• Outflows Factory Intake By Up To 28%
• CAD-Designed Roto-Molded Intake Tube

Upgrade the intake performance of your BMW B58-powered vehicle with the aFe Momentum GT Pro 5R Cold Air Intake System, Part 54-76309. This system is engineered to improve airflow over the factory intake while maintaining a clean, direct-fit installation. Its CAD-designed, dyno-tuned, roto-molded intake tube works with the sealed one-piece housing to help deliver a cooler, denser air charge and consistent engine performance.

The one-piece housing incorporates an auxiliary air inlet and a clear sight window for quick filter inspections without disassembly. A motorsport-inspired carbon fiber trim overlay adds a refined appearance, while the large Pro 5R oiled five-layer progressive cotton-gauze filter provides high-flow filtration and convenient serviceability. The unique filter-to-housing interface maximizes available filter area and simplifies installation. The system is designed to outflow the factory intake by up to 28 percent, depending on vehicle application and operating conditions.

Installation requires no cutting or drilling of OEM components. A reinforced high-temperature silicone coupling connects to the factory breather line, and premium stainless steel clamps help provide a secure, durable fit. The included components are designed with fewer parts to make installation efficient for qualified installers. This intake is intended for select 2016-2017 BMW 340i, 340i xDrive, 440i, 440i xDrive, 440i Gran Coupe, 440i xDrive Gran Coupe, 740i, and 740i xDrive models equipped with the 3.0L turbocharged inline-six B58 engine. Verify exact vehicle compatibility before ordering. This product is not CARB approved and may not be legal for use on emissions-controlled vehicles in certain jurisdictions.

Features:

• Pro 5R Oiled Five-Layer Filter: Uses progressively finer cotton-gauze media to support high airflow and effective filtration.
• Sealed One-Piece Housing: Helps isolate the filter from engine-bay heat while incorporating an auxiliary air inlet for increased intake volume.
• Carbon Fiber Housing Trim: High-gloss 2x2 twill-weave carbon fiber overlay provides a motorsport-inspired appearance.
• Roto-Molded Intake Tube: CAD-designed and dyno-tuned construction supports smooth airflow and a precise fit.
• Clear Sight Window: Allows convenient visual inspection of the air filter without removing the housing.
• High-Flow Design: Engineered to outflow the factory intake by up to 28 percent under applicable testing conditions.
• Direct-Fit Installation: Requires no cutting or drilling of OEM components for a faster installation.
• Premium Installation Hardware: Includes a reinforced high-temperature silicone coupling and stainless steel clamps for secure, durable connections.

Fitments:
2016 BMW 340i Base
2016 BMW 340i xDrive Base
2016 BMW 740i Base
2017 BMW 340i Base
2017 BMW 340i xDrive Base
2017 BMW 440i Base
2017 BMW 440i Gran Coupe Base
2017 BMW 440i xDrive Base
2017 BMW 440i xDrive Gran Coupe Base
2017 BMW 740i Base
2017 BMW 740i xDrive Base
2017 BMW M240i Base
2017 BMW M240i xDrive Base
2018 BMW 340i Base
2018 BMW 340i xDrive Base
2018 BMW 440i Base
2018 BMW 440i Gran Coupe Base
2018 BMW 440i xDrive Base
2018 BMW 440i xDrive Gran Coupe Base
2018 BMW 740i Base
2018 BMW 740i xDrive Base
2018 BMW M240i Base
2018 BMW M240i xDrive Base
2019 BMW 440i Base
2019 BMW 440i Gran Coupe Base
2019 BMW 440i xDrive Base
2019 BMW 440i xDrive Gran Coupe Base
2019 BMW M240i Base
2019 BMW M240i xDrive Base
2020 BMW 440i Base
2020 BMW 440i Gran Coupe Base
2020 BMW 440i xDrive Base
2020 BMW 440i xDrive Gran Coupe Base
2020 BMW M240i Base
2020 BMW M240i xDrive Base
2021 BMW M240i Base
2021 BMW M240i xDrive Base

Air Freight Prohibited: false
Not Carb Approved: true
Carb Acknowledgement Required: true
Ltl Freight Required: false
Prop 65: Y
Part Type: automotive
Epa: N/A
Regular Stock: t
Units Per Sku: 1