aFe Momentum Pro DRY S Cold Air Intake System 51-76301 for BMW M5 and M6 V8 4.4L Twin-Turbo

aFe is proud to introduce the all new Momentum sealed intake system for the 2012-2014 BMW M5 (F10) with the V8-4.4L twin-turbo engine. This all new Momentum intake system produced up to 28hp and 31lbs. x ft. torque and outflows the factory intake by 29%.? This highly engineered intake system uses twin black rotomolded airboxes that keeps warm engine air out for maximum performance. The housing use a unique Patent Pending filter to housing interface that enables us to use the largest filters possible while maintaining a simple hassle-free installation. The C.A.D. designed intake tubes are engineered to unleash all available horsepower and to fit perfectly. The kit comes complete will all necessary hardware. Order Now! Pro DRY S (P/N: 51-76301) or Pro 5R (P/N: 54-76301) Momentum Cold Air Intake System w/ Pro DRY S Filter BMW M5 (F10) / M6 (F06/12/13) 12-19 V8-4.4L (t) S63 PRO DRY S; 360 Deg. Radial Flow A/F; 3 Layer Cotton/Synthetic Gauze Media; Washable and Reusable A/F; Twin Sealed Airbox Design; Rotomolded Heat-Insulating Tubes and Airboxes; Direct Bolt-On; All Hardware; Patent Pending Filter to Housing Interface; Also Fits: BMW M6 (F12/13) 12-14 V8-4.4L (tt)/ BMW M6 (F06) GC 13-14 V8-4.4L (tt)

• Rotomolded Heat Insulating Tubes And Air boxes
• Patent Pending Filter To Housing Interface
• 3 Layer Cotton/Synthetic Gauze Media
• 360 deg. Radial Flow Air Filter
• Twin Sealed Air box Design
• 2 Year Limited Warranty
• Pro DRY S Filter Media
• Washable And Reusable
• All Hardware Included
• Direct Bolt-On

Upgrade the airflow and performance of your BMW with the aFe Momentum Pro DRY S Cold Air Intake System, Part Number 51-76301. Designed for the 2012-2014 BMW M5 (F10) and select BMW M6 models equipped with the V8 4.4L twin-turbo S63 engine, this direct bolt-on intake system is engineered to reduce intake restriction and improve engine breathing. Testing indicates gains of up to 28 horsepower and 31 lb.-ft. of torque, while airflow can increase by up to 29 percent over the factory intake system.

The system uses twin sealed, rotomolded airboxes and heat-insulating intake tubes to help isolate incoming air from engine-bay heat. Its patent-pending filter-to-housing interface allows the use of large air filters while supporting a straightforward installation. The included Pro DRY S filter features washable and reusable three-layer cotton/synthetic gauze media with 360-degree radial airflow. CAD-designed intake tubes are shaped for efficient airflow and a precise factory-style fit.

• Fitment: Designed for 2012-2014 BMW M5 (F10), 2012-2014 BMW M6 (F12/F13), and 2013-2014 BMW M6 Gran Coupe (F06) with the V8 4.4L twin-turbo engine.
• Performance: Delivers up to 28 horsepower, 31 lb.-ft. of torque, and 29 percent greater airflow than the factory intake under tested conditions.
• Warranty: Backed by a 2-year limited warranty.

The aFe Momentum Pro DRY S Intake System includes the intake tubes, twin sealed airboxes, Pro DRY S air filters, and all required installation hardware. It installs as a direct bolt-on replacement without extensive modifications. This product is not CARB approved and may not be legal for use on pollution-controlled vehicles in all areas. Verify local emissions regulations before installation.

Features:

• Performance Gains: Produces up to 28 horsepower and 31 lb.-ft. of torque under tested conditions.
• Increased Airflow: Outflows the factory intake system by up to 29 percent.
• Twin Sealed Airboxes: Rotomolded airboxes help shield the filters from hot engine-compartment air.
• Heat-Insulating Intake Tubes: Rotomolded tubes help maintain cooler, denser intake air.
• Pro DRY S Filter Media: Three-layer cotton/synthetic gauze media provides efficient filtration and is washable and reusable.
• 360-Degree Radial Flow: Filter construction supports high-volume airflow throughout the intake system.
• Patent-Pending Filter Interface: Optimizes filter size while maintaining a simple installation design.
• Direct Bolt-On Installation: CAD-designed components fit the specified BMW applications and include all required hardware.

Fitments:
2012 BMW M6 Base
2013 BMW M5 Base
2013 BMW M6 Base
2014 BMW M5 Base
2014 BMW M6 Base
2014 BMW M6 Gran Coupe Base
2015 BMW M5 Base
2015 BMW M6 Base
2015 BMW M6 Gran Coupe Base
2016 BMW M5 Base
2016 BMW M6 Base
2016 BMW M6 Gran Coupe Base
2017 BMW M6 Base
2017 BMW M6 Gran Coupe Base
2018 BMW M6 Base
2018 BMW M6 Gran Coupe Base
2019 BMW M6 Gran Coupe Base

Air Freight Prohibited: false
Not Carb Approved: true
Carb Acknowledgement Required: true
Ltl Freight Required: false
Prop 65: Y
Part Type: automotive
Epa: N/A
Regular Stock: t
Units Per Sku: 1