aFe POWER 56-70042D Takeda Momentum Cold Air Intake with Pro DRY S Filter for Subaru Forester and Crosstrek 2.5L

This aFe POWER Pro DRY S is a 7-1/2” tall, oil-free, 360-degree conical flow performance air filter with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. This system features a two-piece, computer-designed, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Constructed from XLPE (cross-linked polyethylene) polymer, it is heat soak resistant and extremely durable. A factory-style Helmholtz Chamber is integrated into its design, toning down any drone. The sealed XLPE polymer housing features a rugged design, as well as a clear sight window, allowing for hassle-free filter inspection. aFe POWER's patent pending filter-to-housing interface eliminates the use of an overabundance of parts, further simplifying the installation process. The housing utilizes the factory air inlet, using no additional hardware, and features an optional auxiliary air inlet that pulls in additional air. All stainless-steel clamps, hardware, and silicone couplings are included for a hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts Takeda Momentum Cold Air Intake System w/ Pro DRY S Filter Subaru Forester 19-26/ Crosstrek 21-26 H4-2.5L

• Sealed Housing Protects from Hard Impact and Extreme Elements
• Innovative Filter-to-Housing Interface for Easy Installation
• Dyno-Proven Gains up to +7 HP & +6 Lbs. x Ft. TQ
• Measured Flow: 260 CFM @ 7" H20
• Outflows Factory Intake by 8%

Upgrade the air intake performance of your Subaru with the aFe POWER 56-70042D Takeda Momentum Cold Air Intake System featuring a Pro DRY S oil-free filter. Designed for select Subaru Forester and Crosstrek models with the H4 2.5L engine, this direct bolt-on system improves airflow while maintaining a clean, factory-style installation. Dyno testing shows gains of up to 7 horsepower and 6 lb-ft of torque, with measured airflow reaching 260 CFM at 7 inches of water and an 8 percent improvement over the factory intake.

The three-layer synthetic Pro DRY S filter provides efficient filtration and strong dust-holding capacity without requiring filter oil, making it well suited for street and light off-road use. Its 360-degree conical design is housed within a sealed, impact-resistant XLPE polymer enclosure that helps protect the filter from heat soak and harsh operating conditions. A clear inspection window allows quick filter checks, while the factory-style Helmholtz chamber helps reduce unwanted intake drone.

The computer-designed, two-piece roto-molded intake tube is engineered for a precise fit and maximum performance. aFe POWER's patent-pending filter-to-housing interface reduces unnecessary components and simplifies installation. The housing uses the factory air inlet and includes an optional auxiliary air inlet for additional airflow. Stainless-steel clamps, silicone couplings, and required hardware are included. Installation requires no cutting or drilling of OEM parts.

Fitment: Designed for select 2019-2026 Subaru Forester and 2021-2026 Subaru Crosstrek models equipped with the H4 2.5L engine. Verify exact vehicle application before ordering. This product is not CARB approved and may not be legal for sale or use in emissions-controlled areas.

What's Included: Sealed XLPE housing, Pro DRY S synthetic air filter, two-piece intake tube, silicone couplings, stainless-steel clamps, installation hardware, and clear filter inspection window.

Features:

• Sealed Housing: Protects the filter and intake components from hard impacts, heat soak, and extreme operating conditions.
• Pro DRY S Filter: Uses three layers of oil-free synthetic media for efficient filtration and high dust-holding capacity.
• Dyno-Proven Performance: Delivers gains of up to 7 horsepower and 6 lb-ft of torque compared with the factory intake.
• Direct Bolt-On Installation: Uses the factory air inlet and requires no cutting or drilling of OEM components.

Fitments:
2019 Subaru Forester Base
2019 Subaru Forester Limited
2019 Subaru Forester Premium
2019 Subaru Forester Sport
2019 Subaru Forester Touring
2020 Subaru Forester Base
2020 Subaru Forester Limited
2020 Subaru Forester Premium
2020 Subaru Forester Sport
2020 Subaru Forester Touring
2021 Subaru Crosstrek Limited
2021 Subaru Crosstrek Sport
2021 Subaru Forester Base
2021 Subaru Forester Limited
2021 Subaru Forester Premium
2021 Subaru Forester Sport
2021 Subaru Forester Touring
2022 Subaru Crosstrek Limited
2022 Subaru Crosstrek Sport
2022 Subaru Forester Base
2022 Subaru Forester Limited
2022 Subaru Forester Premium
2022 Subaru Forester Sport
2022 Subaru Forester Touring
2022 Subaru Forester Wilderness
2023 Subaru Crosstrek Limited
2023 Subaru Crosstrek Sport
2023 Subaru Forester Base
2023 Subaru Forester Limited
2023 Subaru Forester Premium
2023 Subaru Forester Sport
2023 Subaru Forester Touring
2023 Subaru Forester Wilderness
2024 Subaru Crosstrek Limited
2024 Subaru Crosstrek Sport
2024 Subaru Crosstrek Wilderness
2024 Subaru Forester Base
2024 Subaru Forester Limited
2024 Subaru Forester Premium
2024 Subaru Forester Sport
2024 Subaru Forester Touring
2024 Subaru Forester Wilderness
2025 Subaru Crosstrek Limited
2025 Subaru Crosstrek Premium
2025 Subaru Crosstrek Sport
2025 Subaru Crosstrek Wilderness
2025 Subaru Forester Base
2025 Subaru Forester Limited
2025 Subaru Forester Premium
2025 Subaru Forester Sport
2025 Subaru Forester Touring
2025 Subaru Forester Wilderness
2026 Subaru Crosstrek Base
2026 Subaru Crosstrek Limited
2026 Subaru Crosstrek Premium
2026 Subaru Crosstrek Sport
2026 Subaru Crosstrek Wilderness
2026 Subaru Forester Base
2026 Subaru Forester Limited
2026 Subaru Forester Premium
2026 Subaru Forester Sport
2026 Subaru Forester Touring
2026 Subaru Forester Wilderness

Air Freight Prohibited: false
Not Carb Approved: true
Carb Acknowledgement Required: true
Ltl Freight Required: false
Prop 65: Y
Part Type: automotive
Epa: N/A
Regular Stock: t
Units Per Sku: 1