aFe Takeda 49-37015-P 2.5-Inch 304 Stainless Steel Cat-Back Exhaust with Polished Tips for 2014-2018 Mazda 3 Hatchback

This system produced gains of up to +5 HP and +7 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 2-1/2" mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a throaty sound. Finishing off this exhaust system are dual 4-1/2" diameter polished 304 stainless steel clamp-on exhaust tips. The tips features a laser etched Takeda logo for a unique style. This system produces a throaty sound unleashing all available horsepower and torque. Some cutting will be required, see instruction sheet for further information. Utilizing factory style flanges and hangers this system mounts directly to factory mounting locations for a hassle-free installation.A mitered merge collector is used to decrease turbulence and increase exhaust velocity resulting in increased horsepower, torque and improved throttle response. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% MIG-Welded for race-proven strength and durability. Takeda 2-1/2 IN 304 Stainless Steel Cat-Back Exhaust System w/ Polished Tips Mazda 3 Hatchback 14-18 L4-2.0/2.5L

• Dual 4-1/2" Diameter Polished 304 Stainless Steel Clamp-On Exhaust Tips
• All Necessary Hardware is Included for a Hassle-Free Installation
• Constructed from 2-1/2" Mandrel-Bent 304 Stainless Steel Tubing
• Utilizes Factory Style Flanges and Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability
• Up to +5 HP and +7 lbs. x Ft. TQ.
• Must Cut OE Exhaust

Upgrade the exhaust performance and appearance of your 2014-2018 Mazda 3 hatchback with the aFe Takeda 49-37015-P cat-back exhaust system. Designed for L4 2.0L and 2.5L engines, this system delivered gains of up to 5 horsepower and 7 lb-ft of torque during in-house dyno testing. Its high-flow design helps improve exhaust velocity, throttle response, and overall engine performance while producing a deep, throaty exhaust note.

The aFe Takeda exhaust is manufactured from 2.5-inch mandrel-bent 304 stainless steel tubing for strength, corrosion resistance, and long-term durability. A high-flow 304 stainless steel muffler and mitered merge collector help reduce turbulence and support efficient exhaust flow. The system is 100% MIG-welded and uses factory-style flanges and hangers for secure mounting at factory locations. Computer-aided design ensures precise, high-tolerance fitment, although cutting of the original equipment exhaust is required during installation.

• Brief Description: Performance cat-back exhaust system for Mazda 3 hatchback models with 2.0L or 2.5L four-cylinder engines.
• Feature: Mandrel-bent 304 stainless steel tubing provides smooth exhaust flow and lasting durability.
• Feature: High-flow muffler produces a throaty exhaust tone while supporting improved performance.
• Feature: Polished stainless steel clamp-on tips enhance the rear appearance and feature laser-etched Takeda logos.
• Feature: Factory-style flanges and hangers simplify alignment with original mounting locations.
• Specification: Tubing size is 2.5 inches.
• Specification: Exhaust tip diameter is 4.5 inches.
• Specification: Tubing and muffler material is 304 stainless steel.
• Specification: Construction is 100% MIG-welded.
• Specification: Tested performance gains reach up to 5 horsepower.
• Specification: Tested torque gains reach up to 7 lb-ft.
• Specification: Installation requires cutting the original equipment exhaust.
• Specification: Designed for L4 2.0L and 2.5L engines.

What's Included: Cat-back exhaust components, polished stainless steel clamp-on exhaust tips, and all necessary installation hardware. Fitment includes 2014-2018 Mazda 3 hatchback models equipped with L4 2.0L or 2.5L engines. Verify vehicle configuration and installation requirements before ordering. This product is not CARB approved where emissions certification is required.

Features:

• Mandrel-bent 2.5-inch 304 stainless steel tubing supports smooth exhaust flow, corrosion resistance, and long-term durability.
• High-flow 304 stainless steel muffler produces a deep, throaty exhaust tone while helping improve engine performance.
• Polished 4.5-inch stainless steel clamp-on exhaust tips provide a finished appearance and feature laser-etched Takeda logos.
• Factory-style flanges and hangers, computer-aided design, and 100% MIG-welded construction provide secure, high-tolerance fitment and race-proven strength.

Fitments:
2014 Mazda 3 i Grand Touring
2014 Mazda 3 I Sport
2014 Mazda 3 i SV
2014 Mazda 3 I Touring
2014 Mazda 3 s Grand Touring
2014 Mazda 3 s Touring
2015 Mazda 3 i Grand Touring
2015 Mazda 3 I Sport
2015 Mazda 3 i SV
2015 Mazda 3 I Touring
2015 Mazda 3 s Grand Touring
2015 Mazda 3 s Touring
2016 Mazda 3 i Grand Touring
2016 Mazda 3 I Sport
2016 Mazda 3 I Touring
2016 Mazda 3 s Grand Touring
2016 Mazda 3 s Touring
2017 Mazda 3 Grand Touring
2017 Mazda 3 Sport
2017 Mazda 3 Touring
2018 Mazda 3 Grand Touring
2018 Mazda 3 Sport
2018 Mazda 3 Touring

Air Freight Prohibited: false
Not Carb Approved: false
Carb Acknowledgement Required: true
Ltl Freight Required: false
Prop 65: Y
Part Type: automotive
Epa: N/A
Regular Stock: t
Units Per Sku: 1