aFe Takeda Momentum Pro DRY S Cold Air Intake System for 2013-2017 Hyundai Veloster 1.6L, Part Number 56-70028D

Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. This 7-1/2” tall 360-degree radial flow air filter features a 4" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. Its auxiliary air inlet can be used to bring in additional air from the engine compartment, or can be closed with an included plug. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system. Takeda Momentum Cold Air Intake System w/ Pro DRY S Filter Hyundai Veloster 13-17 L4-1.6L (t)

• Innovative Filter-to-Housing Interface and minimal hardware for fast and easy installation
• Clear sight window for convenient Filter Inspection without disassembly
• Washable and reusable Pro Dry S Air Filter for Maximum performance
• Sealed Housing capture cool air directly behind front grille
• Dyno-proven gains up to +10 HP & +8 Lbs. x Ft. TQ
• Out flows factory air intake by 64%
• Measured Flow: 320 CFM @7” H2O

Upgrade the intake performance of your 2013-2017 Hyundai Veloster with the aFe Takeda Momentum Pro DRY S Cold Air Intake System, Part Number 56-70028D. Designed for the 1.6L four-cylinder engine, this direct-fit system uses a sealed, heat-resistant cross-linked polyethylene housing and a computer-designed intake tube to improve airflow while maintaining factory-like fitment. The intake captures cooler air from behind the front grille and installs using factory mounting points without cutting or permanent modifications.

The washable and reusable Pro DRY S air filter uses three layers of synthetic media for efficient filtration and excellent dust-holding capacity without filter oil. Its radial-flow design and inverted top increase usable filter surface area to support longer service intervals. A clear sight window allows convenient filter inspection without removing the housing, while the auxiliary air inlet can be used for additional engine-compartment airflow or sealed with the included plug.

Dyno testing shows gains of up to 10 horsepower and 8 lb-ft of torque, with airflow measured at 320 CFM at 7 inches of water and up to 64% greater flow than the factory intake. The patent-pending filter-to-housing interface reduces the number of components for a straightforward installation. All required clamps, couplings, and mounting hardware are included. This product is intended for street use and is not listed as CARB approved; verify emissions requirements before installation.

Product Specifications & Technical Data

• Brand: aFe Takeda
• Part Number: 56-70028D
• Application: Cold air intake system
• Vehicle Fitment: 2013-2017 Hyundai Veloster
• Engine Application: 1.6L inline four-cylinder
• Filter Type: Washable and reusable Pro DRY S synthetic media
• Measured Airflow: 320 CFM at 7 inches of water
• Installation Type: Direct fit using factory mounting points

What's Included

Sealed XLPE airbox, Pro DRY S air filter, intake tube, auxiliary inlet plug, clamps, couplings, mounting hardware, and installation components.

Features:

• Direct-fit installation uses factory mounting points and requires no cutting or permanent modifications
• Three-layer washable and reusable Pro DRY S synthetic filter media provides efficient filtration without oil
• Sealed XLPE housing draws cooler air from behind the front grille and resists heat soak
• Dyno-proven performance gains of up to 10 horsepower and 8 lb-ft of torque
• Airflow measured at 320 CFM at 7 inches of water, with up to 64% greater flow than the factory intake
• Clear sight window enables filter inspection without disassembling the housing
• Patent-pending filter-to-housing interface reduces component count for easier installation
• Auxiliary air inlet supports additional airflow or can be closed with the included plug

Fitments:
2013 Hyundai Veloster Turbo
2014 Hyundai Veloster Turbo
2014 Hyundai Veloster Turbo R-Spec
2015 Hyundai Veloster Turbo
2015 Hyundai Veloster Turbo R-Spec
2016 Hyundai Veloster Rally Edition
2016 Hyundai Veloster Turbo
2016 Hyundai Veloster Turbo R-Spec
2017 Hyundai Veloster Turbo
2017 Hyundai Veloster Turbo R-Spec

Air Freight Prohibited: false
Not Carb Approved: true
Carb Acknowledgement Required: true
Ltl Freight Required: false
Prop 65: Y
Part Type: automotive
Epa: N/A
Regular Stock: t
Units Per Sku: 1