ARB - arb813401 - Awning Bracket L Galvanized

The OS850 awning bracket is designed with welded gussets to provide additional strength when awnings are mounted to roof bars on vehicles used off road or under extreme conditions. Zinc plated and powder coated for corrosion resistance and designed to mount either upright or inverted, the OS850 awning bracket is 50 mm wide allowing it to fit over both Thule SquareBar and Rhino Heavy Duty in the inverted position, or upright using T-bolts or channel nuts on Thule ProfessionalBar, WingBar and AeroBar or Rhino Heavy Duty. Pre-drilled to accept 8mm bolts, at least 2, but preferably 3 bolts should be used to mount to the roof bar for maximum strength. The outer bolt hole between the gussets must always be used for the gusset to be effective. Three slotted 6mm holes are provided to mount the awning. The 813402 awning bracket is not supplied with hardware. Due to different bar designs, it is recommended to use T-bolts and channel nuts supplied by the roof bar manufacturer. Units are now in stock with additional shipments due mid June. The current awning bracket P/No OS3071 has recently been upgraded from 3mm to 4mm construction however it is considered lighter duty and designated for highway use. ARB Awning Bracket; Galvanized; L Bracket;

• Galvanized Finish
• Awning L Bracket
• Awning Bracket

The ARB arb813401 OS850 awning bracket is designed to provide additional support when mounting awnings to vehicle roof bars. Welded gussets add strength for off-road or extreme-condition use, while the galvanized and powder-coated finish helps resist corrosion. The bracket can be mounted upright or inverted, depending on the roof bar configuration.

At 50 mm wide, the bracket is designed to fit over Thule SquareBar and Rhino Heavy Duty bars in the inverted position. In the upright position, it can be used with T-bolts or channel nuts on Thule ProfessionalBar, WingBar and AeroBar, or Rhino Heavy Duty bars. The bracket is pre-drilled for 8 mm mounting bolts, and the outer bolt hole between the gussets must be used for the gusset to provide its intended support. At least two, and preferably three, bolts should be used to mount the bracket to the roof bar for maximum strength.

Three slotted 6 mm holes are provided for mounting the awning. Hardware is not supplied, so T-bolts and channel nuts from the roof bar manufacturer are recommended because roof bar designs vary. Fitment data includes Thule SquareBar, ProfessionalBar, WingBar and AeroBar, plus Rhino Heavy Duty roof bars, in the configurations described above.

What's Included: One ARB awning L bracket. Mounting hardware is not included.

Features:

• Welded Gussets: Provide additional strength for awning installations on roof bars used off road or under extreme conditions.
• Corrosion-Resistant Finish: Galvanized and powder-coated construction helps resist corrosion.
• Reversible Mounting: Designed for upright or inverted installation.
• Roof Bar Fitment: 50 mm width allows inverted installation over Thule SquareBar and Rhino Heavy Duty bars, with upright installation using T-bolts or channel nuts on selected Thule and Rhino bars.
• Awning Mounting Slots: Three slotted 6 mm holes are provided for mounting the awning.
• Roof Bar Bolt Holes: Pre-drilled mounting holes accept 8 mm bolts; at least two, preferably three, bolts are recommended.
• Gusset Support Requirement: The outer bolt hole between the gussets must be used for the gusset to be effective.
• Product Specifications and Technical Data: Brand: ARB; part number: arb813401; product type: awning L bracket; finish: galvanized and powder coated; width: 50 mm; roof bar mounting holes: 8 mm; awning mounting holes: three slotted 6 mm holes; hardware: not supplied.

Air Freight Prohibited: false
Not Carb Approved: false
Ltl Freight Required: false
Prop 65: Y
Part Type: automotive
Epa: N/A
Carb Acknowledgement Required: false
Regular Stock: t
Units Per Sku: 1