AWE Tuning AWE3020-32429 Track Edition Axle-Back Exhaust for BMW G2X 330i/430i - Chrome Silver

Beginning after the secondary catalyst, the AWE Track Edition picks up right before the rear axle and provides a full single 3” route from this point, then splits to dual 3” tip outlets. The Track Edition has absolutely zero filter -- making its sole purpose to increase the volume out of the B48 engine while remaining completely 50-state emissions compliant (and saving weight and dollars along the way). A simple cut (at the factory cut point) is all it takes, and the Track Edition goes into place via four bolt-on locations. AWE includes a factory clamp for the cut point that allows drivers to easily swap back to their stock rear section if ever needed. Here’s some helpful guidance if you’re deciding between kits: Due to the structural differences between the 330i and 430i, we are recommending the following per application: for the 330i, with all factory emissions equipment in place, the Track Edition is recommended for those wanting an elevated exhaust experience from within the cabin. If you plan to upgrade anything further upstream on a 330i, consider the Touring Edition - if you go Touring Edition on your 330i without any upstream modifications, it will resemble the stock sound in the cabin. On the 430i, interior acoustics (since it’s a coupe) differ when compared to its sedan sibling -- aka it’s louder inside. For you 430i drivers, we are recommending the Touring Edition, as the sound is much more pronounced in the cabin on the 430i. The Track Edition on the 430i is a bit rowdy. TLDR: 330i go Track Edition, 430i go Touring Edition! AWE Track Edition Axleback Exhaust for BMW G2X 330i/430i - 4.5” Chrome Silver Tips

• Crafted from CNC mandrel-bent 3” U.S.-sourced .065” wall T304L stainless steel
• Included OEM sleeve clamp allows easy conversion back to stock exhaust if needed
• Less is more: clean, straight-through design maximizes performance
• Dual 4.5” slash-cut tips in chrome silver
• Direct bolt-on for factory-like simplicity
• AWE Valve Simulator Brackets included
• Features the AWE No CEL Guarantee
• Engineered for coupe and sedan
• Perfect fitment, guaranteed
• 50-state emissions legal
• Lifetime warranty

The AWE Tuning Track Edition Axle-Back Exhaust is designed for BMW G2X 330i and 430i applications, beginning after the secondary catalyst and routing from the rear axle through a full single 3-inch section before splitting to dual outlets. Its straight-through, filter-free design increases exhaust volume from the B48 engine while maintaining 50-state emissions compliance as stated by the manufacturer.

Installation requires a simple cut at the factory cut point and uses four bolt-on locations for a direct installation. The included OEM sleeve clamp allows the vehicle to be converted back to the stock rear exhaust section if needed. AWE recommends the Track Edition for 330i vehicles with factory emissions equipment when a more pronounced in-cabin exhaust experience is desired. For 430i vehicles, AWE notes that the coupe’s interior acoustics make the Track Edition more pronounced inside the cabin.

Key Features & Performance Benefits

• Straight-through design: Supports increased exhaust volume with a clean, unrestricted layout.
• 3-inch exhaust routing: Uses a full single 3-inch route that splits to dual outlets.
• T304L stainless steel construction: CNC mandrel-bent tubing is made from U.S.-sourced .065-inch-wall T304L stainless steel.
• Direct bolt-on installation: Uses four bolt-on locations and the factory cut point for installation.

Key Product Specifications & Technical Data

• Brand: AWE Tuning
• Part number: AWE3020-32429
• Product type: Track Edition axle-back exhaust
• Application: BMW G2X 330i/430i
• Exhaust tubing: Single 3-inch route splitting to dual outlets
• Outlet tips: Dual 4.5-inch slash-cut chrome silver tips
• Material: CNC mandrel-bent T304L stainless steel with .065-inch wall thickness
• Emissions and warranty: 50-state emissions legal with AWE No CEL Guarantee and lifetime warranty

What's Included in the Box

• Track Edition axle-back exhaust
• OEM sleeve clamp
• AWE Valve Simulator Brackets

Fitment

Fits 2019-2023 BMW 330i, 2019-2020 BMW 330i xDrive, and 2021-2023 BMW 430i applications listed by the manufacturer.

Fitments:
2019 BMW 330i Base
2019 BMW 330i xDrive Base
2020 BMW 330i Base
2020 BMW 330i xDrive Base
2021 BMW 330i Base
2021 BMW 330i xDrive Base
2021 BMW 430i Base
2021 BMW 430i xDrive Base
2022 BMW 330i Base
2022 BMW 330i xDrive Base
2022 BMW 430i Base
2022 BMW 430i xDrive Base
2023 BMW 330i Base
2023 BMW 330i xDrive Base
2023 BMW 430i Base
2023 BMW 430i xDrive Base
2024 BMW 330i Base
2024 BMW 330i xDrive Base
2024 BMW 430i Base
2024 BMW 430i xDrive Base

Air Freight Prohibited: false
Not Carb Approved: false
Ltl Freight Required: false
Prop 65: Y
Part Type: automotive
Epa: N/A
Carb Acknowledgement Required: false
Regular Stock: t
Units Per Sku: 1