DEI HT Silicone Coating Aluminum Aerosol, Part Number 10302

Ht Silicone Coatings solve the problem of exhaust wraps deteriorating because of dirt and debris hitting it. It seals and protects wraps and extends the life of the wrap. The High Temperature (HT) Silicone Coating provides lasting protection for any hot surface up to 1500 degrees. DEI recommend the use of this coating with their exhaust wrap because it seals the material and provides lasting protection from oil, dirt and road grime. Don't limit the use to exhaust header wrap, this products works well on headers, blocks, starters and even on your grill at home. HT Silicone Coating is VOC (Volatile Organic Compounds) compliant in all 50 states. For use with all DEI exhaust wraps, HT Silicone Coating penetrates, seals and protects as well as helping to extend the lifespan of all DEI exhaust wraps. See special instructions below for best adhesion on Titanium exhaust wrap products. Protection from abrasions, oil, and grime Withstands up to 1500°F For use on exhaust wraps, engine blocks, pipes, manifolds & more 12 oz. can Cure temperature: 400°F Cure time: 2 hours Titanium Application Instructions While not required for Titanium exhaust wrap, HT Silicone Coating will protect and prolong the life of the wrap. Due to the difference in material from glass fiber, HT Silicone Coating soaks into Titanium exhaust wrap's basalt fiber differently and needs a few coats and heat cycles for it to adhere properly. DEI recommends a minimum of three coats, each heat cycled for curing before applying the next coat. To cure, HT Silicone Coating needs to reach a temperature of 400°F for approximately 2 hours. Allow to cool before applying the next coat. * HT Silicone Coating is sold in a compressed aerosol container. Regulations restrict the air transport of flammable products (aerosols). If you are outside the continental USA and are interested in purchasing an aerosol based DEI product, please contact our offices for further information at 1-440-930-7940. One can of high-temp silicone coating in aluminum. Titanium Application Instructions While not required for Titanium exhaust wrap, HT Silicone Coating will protect and prolong the life of the wrap. Due to the difference in material from glass fiber, HT Silicone Coating soaks into Titanium exhaust wrap's basalt fiber differently and needs a few coats and heat cycles for it to adhere properly. DEI recommends a minimum of three coats, each heat cycled for curing before applying the next coat. To cure, HT Silicone Coating needs to reach a temperature of 400°F for approximately 2 hours. Allow to cool before applying the next coat. Universal

• Restores and Protects Faded Surfaces – Bring back the clean look of grills, fire pits, and other high-temp metal surfaces
• Shields Against the Elements – Helps guard against oil, dirt, moisture, rust, and surface wear
• Multi-Use Formula – Great for automotive, outdoor, and home heat-related projects
• Protects Exhaust Wraps – Seals fibers to reduce fraying and prolong wrap life
• Fast Application & Cure – 12 oz. spray can with a 2-hour cure time at 400°F
• Withstands High Heat – Rated for direct heat exposure up to 1200°F
• VOC Compliant in All 50 States – Legal and safe to use nationwide
• 12 oz. Spray Can

DEI HT Silicone Coating is a high-temperature protective coating designed to seal, protect, and extend the service life of exhaust wraps and other heat-exposed surfaces. The formula helps defend against abrasions, oil, dirt, moisture, road grime, rust, and general surface wear while restoring a clean appearance to faded grills, fire pits, and automotive components.

Rated for hot surfaces up to 1,500°F, this versatile silicone coating is suitable for DEI exhaust wraps, headers, engine blocks, pipes, manifolds, starters, grills, and other high-temperature applications. It penetrates wrap fibers to help reduce fraying and prolong wrap life. The aerosol formula is VOC compliant in all 50 states and is supplied in an aluminum can for convenient application.

For Titanium exhaust wrap, DEI recommends applying at least three coats. Each coat should be heat-cycled to approximately 400°F for about two hours, then allowed to cool before the next coat is applied. This process helps the coating adhere properly to the wrap’s basalt fiber construction. The coating is also compatible with glass-fiber exhaust wraps and other suitable high-temperature materials. This product is intended for universal applications and does not include vehicle-specific fitment data.

What's Included: One 12-ounce aerosol can of DEI HT Silicone Coating in aluminum.

Features:

• High-Temperature Protection: Withstands heat exposure up to 1,500°F for demanding exhaust and engine applications.
• Exhaust Wrap Protection: Seals wrap fibers to help reduce fraying and extend the service life of DEI exhaust wraps.
• Element Resistance: Helps protect surfaces from oil, dirt, moisture, road grime, rust, abrasions, and general wear.
• Versatile Application: Suitable for exhaust wraps, headers, engine blocks, pipes, manifolds, starters, grills, fire pits, and other hot surfaces.

Air Freight Prohibited: true
Not Carb Approved: false
Ltl Freight Required: false
Prop 65: Y
Part Type: powersports
Epa: N/A
Carb Acknowledgement Required: false
Regular Stock: t
Units Per Sku: 1