Dinan Carbon Fiber Cold Air Intake for BMW X5 X6 F95/F96 G05/G06 - Enhanced Performance and Aesthetic Appeal

Beyond outward appearances and upon closer inspection details emerge which showcase the level of care taken in the intake systems design beyond simply aesthetics. For instance, the secondary air source is deriving its contents from an unobtrusive central hood scoop located behind the front grilles that feeds into the newly formed inlet hump at the front of the engine bay. Through constant CFD analysis, the design of the scoop and secondary inlet continually underwent improvements in order to meet the demand of an even and un-agitated air supply to each air box. In its final form, accents in the carbon both provided a visual embellishment as well as created the outward manifestations of the runners used to direct and smooth the secondary air flow. The additional air flow ultimately supplements the factory inlet locations on both the left and right air boxes with ambient air from outside of the engine compartment. These air boxes have been enlarged and equipped with massive filters to handle this increased volume and together with the rest of the system allow the intake to flow as efficiently as possible. Carbon Fiber - F95/F96/G05/G06/G07/G09

• Larger volume air boxes (56% larger than stock) that completely seals allowing an increased volume of air to be utilized.
• 86% increase in inlet cross sectional area via the center inlet/scoop (secondary inlet) for maximum airflow.
• More Flow: 10% greater than stock (Stock: 575 CFM, Dinan: 630 CFM @ 30" H2O per bank).
• 46% increase in filter area (stock: 51in², Dinan: 82in² per side) for optimum flow.
• Center inlet/scoop doubles as a visually pleasing carbon fiber engine cover.
• Increased turbo efficiency, reliability, and head room.
• Increased sound for aural satisfaction at full load.
• Carbon Fiber overload – the good kind.
• Improved throttle response.
• Bolt-on installation.

Experience optimal airflow and engine efficiency with the Dinan Carbon Fiber Cold Air Intake designed specifically for BMW X5 and X6 models from 2020 to 2023. Crafted with precision, this intake system features larger volume air boxes that are 56% bigger than the stock units, allowing for increased air capacity while maintaining a complete seal to prevent unfiltered air from entering the engine bay. The innovative secondary inlet, a center scoop made of carbon fiber, boasts an 86% increase in cross-sectional area, delivering maximum airflow and reducing turbulence. This design not only enhances performance but also adds a visually striking element to the engine bay, with the scoop doubling as a high-quality carbon fiber engine cover.

Built for high performance, the system provides a 10% increase in airflow compared to stock, with flow rates reaching approximately 630 CFM at 30 inches of water pressure per bank. The enlarged filters, with a 46% increase in surface area over the stock filters, ensure efficient air filtration and reduced restriction. The intake system improves turbocharger efficiency, enhances throttle response, and increases reliability, providing a noticeable boost in power and engine responsiveness. Additionally, the increased airflow results in a richer intake sound, offering a more engaging driving experience. Installation is straightforward, with a bolt-on process that integrates seamlessly with existing components.

Constructed primarily from premium carbon fiber, the Dinan Cold Air Intake combines durability with a sleek aesthetic. The system is engineered to optimize ambient air intake from outside the engine bay, feeding the engine with cooler, denser air that supports better combustion and performance. This upgrade is suitable for enthusiasts seeking to maximize their vehicle's capabilities while adding a refined, sporty appearance to their engine compartment. Note: This product requires acknowledgment of CARB regulations and is not CARB-approved. Proper handling and installation are recommended for maximum benefit and safety.

Features:

• Larger volume air boxes that completely seal for increased air capacity

• 86% increase in inlet cross-sectional area via the center scoop for maximum airflow

• 10% greater airflow than stock, reaching approximately 630 CFM at 30 inches of water pressure per bank

• 46% increase in filter area for optimal airflow and filtration efficiency

• Carbon fiber center scoop doubles as a visually appealing engine cover

• Enhanced turbo efficiency, reliability, and engine headroom

• Improved throttle response and increased sound for a more engaging driving experience

• Bolt-on installation for easy upgrade

Fitments:
2020 BMW X5 M
2020 BMW X5 M Competition
2020 BMW X6 M
2020 BMW X6 M Competition
2021 BMW X5 M
2021 BMW X6 M
2021 BMW X6 M Competition
2022 BMW X5 M
2022 BMW X6 M
2023 BMW X5 M
2023 BMW X6 M
2023 BMW X7 M60i
2023 BMW XM Base
2024 BMW X5 M Competition
2024 BMW X5 M60i
2024 BMW X6 M Competition
2024 BMW X6 M60i
2024 BMW X7 M60i
2024 BMW XM Base
2025 BMW X5 M Competition
2025 BMW X5 M60i
2025 BMW X6 M Competition
2025 BMW X6 M60i
2025 BMW X7 M60i
2025 BMW XM Base
2026 BMW X5 M Competition
2026 BMW X5 M60i
2026 BMW X6 M Competition
2026 BMW X6 M60i
2026 BMW X7 M60i

Air Freight Prohibited: false
Not Carb Approved: true
Carb Acknowledgement Required: true
Ltl Freight Required: false
Prop 65: Y
Part Type: automotive
Epa: N/A
Regular Stock: t
Units Per Sku: 1