Dinan dnnD760-0056 Carbon Fiber Cold Air Intake for BMW X5 M, X6 M, X5 M60i, X6 M60i and X7

Beyond outward appearances and upon closer inspection details emerge which showcase the level of care taken in the intake systems design beyond simply aesthetics. For instance, the secondary air source is deriving its contents from an unobtrusive central hood scoop located behind the front grilles that feeds into the newly formed inlet hump at the front of the engine bay. Through constant CFD analysis, the design of the scoop and secondary inlet continually underwent improvements in order to meet the demand of an even and un-agitated air supply to each air box. In its final form, accents in the carbon both provided a visual embellishment as well as created the outward manifestations of the runners used to direct and smooth the secondary air flow. The additional air flow ultimately supplements the factory inlet locations on both the left and right air boxes with ambient air from outside of the engine compartment. These air boxes have been enlarged and equipped with massive filters to handle this increased volume and together with the rest of the system allow the intake to flow as efficiently as possible. Carbon Fiber - F95/F96/G05/G06/G07/G09

• Larger volume air boxes (56% larger than stock) that completely seals allowing an increased volume of air to be utilized.
• 86% increase in inlet cross sectional area via the center inlet/scoop (secondary inlet) for maximum airflow.
• More Flow: 10% greater than stock (Stock: 575 CFM, Dinan: 630 CFM @ 30" H2O per bank).
• 46% increase in filter area (stock: 51in², Dinan: 82in² per side) for optimum flow.
• Center inlet/scoop doubles as a visually pleasing carbon fiber engine cover.
• Increased turbo efficiency, reliability, and head room.
• Increased sound for aural satisfaction at full load.
• Carbon Fiber overload – the good kind.
• Improved throttle response.
• Bolt-on installation.

The Dinan dnnD760-0056 Carbon Fiber Cold Air Intake is designed for select BMW X5, X6, and X7 applications. Its intake system uses enlarged air boxes, massive filters, and a central carbon fiber hood scoop to supplement the factory inlet locations with ambient air from outside the engine compartment.

Developed through CFD analysis, the center scoop and secondary inlet are designed to provide an even, un-agitated air supply to each air box. The system is rated at 630 CFM per bank at 30 inches H2O, compared with 575 CFM for the stock system, while the filter area increases from 51 square inches to 82 square inches per side. The air boxes are 56% larger than stock, and the center inlet provides an 86% increase in inlet cross-sectional area.

Additional benefits include improved throttle response, increased turbo efficiency, reliability, and headroom, along with increased sound at full load. The center inlet also functions as a carbon fiber engine cover. Installation is bolt-on. This product is not CARB approved, and California emissions approval is not indicated in the supplied product data. Fitment data supplied includes 2020-2023 BMW X5, BMW X6, and 2023 BMW X7 applications; verify vehicle configuration before ordering.

What's Included

The supplied product data identifies the Dinan carbon fiber cold air intake system but does not specify individual included components.

Features:

• Larger air boxes: Air boxes are 56% larger than stock and seal completely to support increased airflow volume.
• Central carbon fiber inlet: The center inlet and scoop provide an 86% increase in inlet cross-sectional area.
• Increased airflow: Flows 630 CFM per bank at 30 inches H2O compared with 575 CFM for the stock system.
• Expanded filter area: Filter area increases from 51 square inches to 82 square inches per side.
• CFD-developed airflow: The scoop and secondary inlet were refined to promote an even, un-agitated air supply to each air box.
• Carbon fiber engine cover: The center inlet and scoop also serve as a visually integrated carbon fiber engine cover.
• Performance response: Designed to support increased turbo efficiency, reliability, headroom, and improved throttle response.
• Bolt-on installation: Designed for bolt-on installation.
• Fitment: Supplied fitment includes 2020-2023 BMW X5, 2020-2023 BMW X6, and 2023 BMW X7 applications.
• Regulatory information: Product data states that this intake is not CARB approved.

Fitments:
2020 BMW X5 M
2020 BMW X5 M Competition
2020 BMW X6 M
2020 BMW X6 M Competition
2021 BMW X5 M
2021 BMW X6 M
2021 BMW X6 M Competition
2022 BMW X5 M
2022 BMW X6 M
2023 BMW X5 M
2023 BMW X6 M
2023 BMW X7 M60i
2023 BMW XM Base
2024 BMW X5 M Competition
2024 BMW X5 M60i
2024 BMW X6 M Competition
2024 BMW X6 M60i
2024 BMW X7 M60i
2024 BMW XM Base
2025 BMW X5 M Competition
2025 BMW X5 M60i
2025 BMW X6 M Competition
2025 BMW X6 M60i
2025 BMW X7 M60i
2025 BMW XM Base
2026 BMW X5 M Competition
2026 BMW X5 M60i
2026 BMW X6 M Competition
2026 BMW X6 M60i
2026 BMW X7 M60i

Air Freight Prohibited: false
Not Carb Approved: true
Carb Acknowledgement Required: true
Ltl Freight Required: false
Prop 65: Y
Part Type: automotive
Epa: N/A
Regular Stock: t
Units Per Sku: 1