EBC DP31741C Redstuff Rear Brake Pads for 2005–2010 Ford Mustang 4.0L

it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation. Pad Dimensions: 113 x 48 x 17mm

• Great For Fast Street And Premium Sedan
• Ideal European Vehicle Brake Upgrade
• High Friction Low Heat Fade
• Lowest Dust Pad In Range

Upgrade the braking performance of your 2005–2010 Ford Mustang 4.0L with EBC DP31741C Redstuff rear brake pads. Designed for fast street driving, premium sedans, sport compacts, and hot hatches, these high-friction ceramic pads deliver strong, consistent stopping power with excellent resistance to heat fade during repeated heavy braking.

With a nominal friction coefficient of approximately 0.5, EBC Redstuff pads have been proven to stop a passenger car up to 43 feet sooner than original-equipment pads during testing from 100 mph. Their ceramic formulation produces approximately 50 percent less dust than semi-metallic pads, helping keep wheels cleaner while maintaining confident braking performance. Most EBC Redstuff pads are approved to the ECE R90 brake safety regulation.

The EBC Brake-In surface coating helps condition the rotor surface and accelerate the bedding process. Because these are hard-wearing performance pads, complete bedding may take up to 1,000 miles as the friction material conforms to the brake rotor. Drivers should allow adequate time for the pads to reach optimal performance. The DP31741C is intended as a rear-axle brake upgrade for compatible Mustang applications; verify year, engine, axle position, and existing brake configuration before installation.

What's Included: One set of EBC Redstuff rear brake pads for the specified application. Hardware and wear sensors are included only if supplied by the vehicle-specific pad set.

Features:

• Fast Street Performance: Delivers strong, repeatable braking for spirited road use and premium sedan applications.
• High Friction, Low Fade: Approximately 0.5 nominal friction coefficient supports confident braking during repeated heavy stops.
• Reduced Brake Dust: Ceramic friction material produces approximately 50 percent less dust than semi-metallic pads.
• Brake-In Surface Coating: EBC Brake-In coating helps condition the rotor and accelerate the bedding process.

Air Freight Prohibited: false
Not Carb Approved: false
Ltl Freight Required: false
Prop 65: Y
Part Type: automotive
Epa: N/A
Carb Acknowledgement Required: false
Regular Stock: t
Units Per Sku: 1