Skip to product information
1 of 1

EBC DP33039C Redstuff Front Brake Pads for 2015+ Ford Mustang 2.3L Turbo

EBC DP33039C Redstuff Front Brake Pads for 2015+ Ford Mustang 2.3L Turbo

EBC -

Regular price $190.69 USD
Regular price $200.73 USD Sale price $190.69 USD
Sale Special Order this item by Clicking the Chat Button Below
Shipping calculated at checkout.
it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation. Pad Dimensions: 185.9 x 58.7 x 16.9mm
  • Great For Fast Street And Premium Sedan
  • Ideal European Vehicle Brake Upgrade
  • High Friction Low Heat Fade
  • Lowest Dust Pad In Range

Upgrade the braking performance of your 2015 and newer Ford Mustang 2.3L Turbo with EBC Redstuff ceramic front brake pads. Designed for fast street driving, premium sedans, sport compacts, and hot hatches, these pads deliver strong initial bite, high friction, and improved resistance to heat fade during repeated heavy braking. EBC Redstuff pads are engineered to provide more responsive stopping performance while operating more quietly and producing significantly less dust than conventional semi-metallic pads.

The EBC Redstuff compound has a nominal friction coefficient of approximately 0.5 and can reduce brake dust by about 50 percent compared with typical semi-metallic pads. Independent testing has shown the compound can stop a passenger car up to 43 feet sooner than original-equipment pads from 100 mph, depending on vehicle and testing conditions. The integrated EBC Brake-In surface coating helps condition the brake rotor and accelerate the bedding process. Because these are high-performance, hard-wearing pads, complete bedding may take up to 1,000 miles; drivers should allow sufficient time for the pads to conform fully to the rotor surface.

Most EBC Redstuff pads are approved to the ECE R90 brake safety regulation. The DP33039C set is intended for the front axle and is supplied as a vehicle-specific replacement brake pad solution. Confirm exact vehicle, brake package, and axle compatibility before installation. Professional installation and proper bedding according to EBC recommendations are advised for optimum performance.

Product Specifications & Technical Data

  • Brand: EBC
  • Part Number: DP33039C
  • Product Line: Redstuff Ceramic
  • Application: Front axle brake pads
  • Vehicle Fitment: 2015+ Ford Mustang with 2.3L Turbo engine
  • Pad Material: High-friction ceramic compound
  • Nominal Friction Coefficient: Approximately 0.5
  • Brake Safety Approval: Most Redstuff applications approved to ECE R90

What's Included

One set of EBC Redstuff front brake pads for the specified application. Brake hardware or wear sensors are included only when supplied by the manufacturer for this part number.

Features:

  • Fast Street Performance: Provides strong braking response for fast street driving and premium sedan applications.
  • High Friction With Low Heat Fade: Maintains consistent braking performance during repeated heavy braking.
  • Reduced Brake Dust: Produces approximately 50 percent less dust than typical semi-metallic brake pads.
  • Brake-In Surface Coating: Conditions the rotor surface and helps accelerate pad bedding.
Air Freight Prohibited: false
Not Carb Approved: false
Ltl Freight Required: false
Prop 65: Y
Part Type: automotive
Epa: N/A
Carb Acknowledgement Required: false
Regular Stock: false
Units Per Sku: 1

Materials

Shipping & Returns

Dimensions

Care Instructions

View full details

    Contact form