EBC DP3642/2C Redstuff Rear Brake Pads for 1992–1994 Acura Integra 1.7L VTEC
EBC DP3642/2C Redstuff Rear Brake Pads for 1992–1994 Acura Integra 1.7L VTEC
EBC -
Couldn't load pickup availability
- Great For Fast Street And Premium Sedan
- Ideal European Vehicle Brake Upgrade
- High Friction Low Heat Fade
- Lowest Dust Pad In Range
Upgrade the braking performance of your 1992–1994 Acura Integra 1.7L VTEC with EBC DP3642/2C Redstuff rear brake pads. Designed for fast street driving, premium sedans, sport compacts, and hot hatches, these high-friction ceramic pads deliver stronger braking response with reduced noise and less dust than conventional semi-metallic pads.
EBC Redstuff pads feature a nominal friction coefficient of approximately 0.5 and can reduce dust by about 50 percent compared with standard semi-metallic pads. In controlled testing, Redstuff pads have stopped a passenger car up to 43 feet quicker than original equipment pads during braking from 62 mph. Their low-heat-fade formulation is suited to repeated heavy braking, while the EBC Brake-In surface coating helps condition the rotor and accelerate the bedding-in process.
Drivers should allow adequate time for the pads to fully bed in. Bedding may take up to approximately 1,000 miles as the friction material conforms to the brake rotor surface. Once bedded, the pads provide consistent fast-road performance, quiet operation, and lower brake dust. Most EBC Red Ceramic pads are approved to the ECE R90 brake safety regulation.
Fitment: Designed for the rear brakes of the 1992–1994 Acura Integra with the 1.7L VTEC engine. Verify vehicle application and brake configuration before installation.
What's Included: One set of EBC Redstuff rear brake pads for the specified application.
Features:
- Fast Street Performance: Designed for repeated heavy braking on fast street-driven vehicles.
- High Friction, Low Heat Fade: Provides a nominal friction coefficient of approximately 0.5 with dependable performance under elevated temperatures.
- Reduced Brake Dust: Produces approximately 50 percent less dust than comparable semi-metallic pads.
- Brake-In Surface Coating: Helps condition the rotor surface and accelerate the bedding-in process.
| Air Freight Prohibited: false |
| Not Carb Approved: false |
| Ltl Freight Required: false |
| Prop 65: Y |
| Part Type: automotive |
| Epa: N/A |
| Carb Acknowledgement Required: false |
| Regular Stock: t |
| Units Per Sku: 1 |
Fitments
Fitments
Materials
Materials
Shipping & Returns
Shipping & Returns
Dimensions
Dimensions
Care Instructions
Care Instructions
Share
