EBC Powersports CK1145 CK Series Clutch Friction Plate Set for 1976 Honda CB750

If you need to replace worn original plates these are exactly the same technology, size and shape and drop right into your clutch basket. Plates must be oil soaked using standard drive case oil for a few hours before install to avoid heat scorching. Always replace tired clutch springs and check for wear on driven (non lined) plates. If clutch has been slipping before replacement a full DRC or DRCF kit may be a better choice. CK Series Clutch Plate Set; Full Engine Set; Friction Plates; OEM Style Cork Based Materials;

• Stack height measured to reset clutch as new
• Made with OEM-style cork based materials
• Full engine sets of friction plates only
• Made with OEM style cork based materials

Restore smooth, consistent clutch engagement in your 1976 Honda CB750 with the EBC Powersports CK1145 CK Series Clutch Plate Set. Designed as a full-engine set of friction plates, this replacement set matches the original equipment technology, shape, and application for a direct fit in the factory clutch basket. It is suitable for Honda CB750 K6, K7, and F2 models equipped with the applicable 750cc engine.

The EBC CK Series uses OEM-style cork-based friction materials engineered for dependable performance in standard powersports applications. Each set is manufactured with the correct stack height to help return the clutch assembly to its original operating configuration. Before installation, soak the friction plates in standard drive-case oil for several hours to help prevent heat scorching during initial operation. For best results, inspect the driven plates for wear and replace fatigued clutch springs during installation.

• Full engine set of friction plates only
• OEM-style cork-based friction materials
• Stack height measured to help reset the clutch as new
• Direct-fit replacement for the original clutch basket application
• Designed for dependable clutch engagement and release
• Recommended for replacing worn original friction plates
• Requires oil soaking before installation
• Inspect driven plates and clutch springs before final assembly

What's Included: One EBC Powersports CK1145 CK Series full-engine friction plate set. The kit contains friction plates only; clutch springs and driven plates are not included. If the clutch was slipping before replacement, a complete EBC DRC or DRCF clutch kit may be a more suitable repair solution.

Fitment: 1976 Honda CB750 K6, K7, and F2, 750cc applications. Confirm the motorcycle model, year, and clutch configuration before ordering.

Features:

• OEM-style cork-based friction materials support reliable clutch operation and smooth engagement.
• Full-engine friction plate set provides the replacement plates needed for the applicable Honda CB750 clutch assembly.
• Measured stack height helps restore the clutch pack to its original operating configuration.
• Direct-fit OEM-style design drops into the original clutch basket when matched to the specified application.
• Oil soaking before installation helps reduce the risk of heat scorching during initial operation.
• Inspection of driven plates and replacement of tired clutch springs are recommended for a complete clutch service.
• Designed for 1976 Honda CB750 K6, K7, and F2 750cc applications.
• Friction plates only; driven plates, clutch springs, and other installation components are not included.

Air Freight Prohibited: false
Not Carb Approved: false
Ltl Freight Required: false
Prop 65: Y
Part Type: powersports
Epa: N/A
Carb Acknowledgement Required: false
Regular Stock: t
Units Per Sku: 1