EBC Powersports CK1183 CK Series Clutch Friction Plate Set for 1980 Honda CBX 1000 B/C

If you need to replace worn original plates these are exactly the same technology, size and shape and drop right into your clutch basket. Plates must be oil soaked using standard drive case oil for a few hours before install to avoid heat scorching. Always replace tired clutch springs and check for wear on driven (non lined) plates. If clutch has been slipping before replacement a full DRC or DRCF kit may be a better choice. CK Series Clutch Plate Set; Full Engine Set; Friction Plates; OEM Style Cork Based Materials; AWSL;

• Stack height measured to reset clutch as new
• Made with OEM-style cork based materials
• Full engine sets of friction plates only
• Made with OEM style cork based materials

Restore dependable clutch engagement in your 1980 Honda CBX 1000 B/C with the EBC Powersports CK1183 CK Series Clutch Plate Set. Designed as a direct replacement for worn original friction plates, this full engine set uses OEM-style cork-based friction material and is manufactured to match the original clutch technology, shape, and fit. The plates are designed to drop into the factory clutch basket for efficient installation and reliable service.

The EBC Powersports CK1183 clutch set is engineered with a stack height measured to help reset the clutch to like-new operating specifications. Before installation, soak the friction plates in standard drive case oil for several hours to help prevent heat scorching during initial operation. For best results, inspect the driven, non-lined plates for wear and replace tired clutch springs. If the clutch was slipping before replacement, a complete DRC or DRCF clutch kit may be a more suitable repair solution.

What's Included: Full engine set of EBC CK Series friction plates only. Clutch springs, driven plates, gaskets, and installation hardware are not included. Verify clutch condition and application details before installation.

Fitment: 1980 Honda CBX 1000 B/C, 1000cc. This product is intended for powersports applications and should be installed according to the vehicle manufacturer's service procedures.

Notice: This product may expose you to chemicals known to the State of California to cause cancer or reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Features:

• OEM-Style Friction Material: Uses cork-based friction material designed to closely match original equipment clutch performance.
• Full Engine Plate Set: Includes a complete set of friction plates for the clutch assembly, without driven plates or springs.
• Factory-Style Fit: Matches the original plate technology, shape, and fit for installation in the stock clutch basket.
• Reset-Ready Stack Height: Stack height is measured to help restore clutch operation to like-new specifications.

Air Freight Prohibited: false
Not Carb Approved: false
Ltl Freight Required: false
Prop 65: Y
Part Type: powersports
Epa: N/A
Carb Acknowledgement Required: false
Regular Stock: t
Units Per Sku: 1