EBC Powersports CK1297 CK Series Clutch Friction Plate Set for Honda ST1300 and GL1800 Gold Wing

If you need to replace worn original plates these are exactly the same technology, size and shape and drop right into your clutch basket. Plates must be oil soaked using standard drive case oil for a few hours before install to avoid heat scorching. Always replace tired clutch springs and check for wear on driven (non lined) plates. If clutch has been slipping before replacement a full DRC or DRCF kit may be a better choice. CK Series Clutch Plate Set; Full Engine Set; Friction Plates; OEM Style Cork Based Materials;

• Stack height measured to reset clutch as new
• Made with OEM-style cork based materials
• Full engine sets of friction plates only
• Made with OEM style cork based materials

Restore dependable clutch engagement with the EBC Powersports CK1297 CK Series Clutch Plate Set. Designed as an OEM-style replacement, this full engine set includes friction plates manufactured with cork-based materials to match the original technology, shape, and fit. The plates are designed to drop into the clutch basket without modifications, making them a practical choice when replacing worn friction components.

Before installation, soak the friction plates in standard drive-case oil for several hours to help prevent heat scorching during initial operation. For best results, replace fatigued clutch springs and inspect the driven, non-lined plates for glazing, distortion, or excessive wear. If the clutch was slipping before replacement, a complete EBC DRC or DRCF clutch kit may be a more suitable repair solution than friction plates alone.

• Stack height: Measured to help restore the clutch assembly to like-new operating specifications
• Friction material: OEM-style cork-based material for reliable clutch engagement
• Set configuration: Full engine set containing friction plates only
• Installation preparation: Requires oil soaking before installation to reduce the risk of heat scorching
• Replacement design: OEM-style technology, size, and shape for direct clutch basket installation
• Application type: Powersports motorcycle clutch replacement component
• Included components: Friction plates; clutch springs and driven plates are not included
• Intended use: Restoring clutch performance when original friction plates are worn

The EBC Powersports CK1297 is designed to fit select Honda ST1300 models from 2003 through 2010 and Honda GL1800 Gold Wing models from 2001 and 2002. Confirm the motorcycle model and year before ordering to ensure proper application.

What's Included: One full engine set of EBC CK Series friction plates. Clutch springs, driven plates, gaskets, and installation hardware are not included.

Features:

• Stack height is measured to help reset the clutch assembly to like-new specifications
• OEM-style cork-based friction material supports consistent clutch engagement
• Full engine set provides the friction plates needed for a complete plate replacement
• Direct-fit OEM-style design matches the original clutch plate technology, size, and shape

Fitments:
2001 Honda GL1800 Gold Wing Base
2002 Honda GL1800 Gold Wing Base
2003 Honda GL1800 Gold Wing Base
2003 Honda ST1300 Base
2004 Honda GL1800 Gold Wing Base
2004 Honda ST1300 Base
2005 Honda GL1800 Gold Wing Base
2005 Honda ST1300 Base
2006 Honda ST1300 Base
2007 Honda ST1300 Base
2008 Honda ST1300 Base
2009 Honda ST1300 Base
2010 Honda ST1300 Base
2013 Honda GL1800B Gold Wing F6B Base
2014 Honda GL1800B Gold Wing F6B Base
2015 Honda GL1800B Gold Wing F6B Base

Air Freight Prohibited: false
Not Carb Approved: false
Ltl Freight Required: false
Prop 65: Y
Part Type: powersports
Epa: N/A
Carb Acknowledgement Required: false
Regular Stock: t
Units Per Sku: 1