EBC Powersports CK2287 CK Series Clutch Plate Set for 1992 Yamaha YFB 250

If you need to replace worn original plates these are exactly the same technology, size and shape and drop right into your clutch basket. Plates must be oil soaked using standard drive case oil for a few hours before install to avoid heat scorching. Always replace tired clutch springs and check for wear on driven (non lined) plates. If clutch has been slipping before replacement a full DRC or DRCF kit may be a better choice. CK Series Clutch Plate Set; Full Engine Set; Friction Plates; OEM Style Cork Based Materials;

• Stack height measured to reset clutch as new
• Full engine sets of friction plates only
• Made with OEM style cork based materials

The EBC Powersports CK2287 CK Series Clutch Plate Set is designed as a direct replacement for the original clutch friction plates in the 1992 Yamaha YFB 250. This full-engine set uses OEM-style cork-based friction materials and is manufactured to match the original plate technology, shape, and fit for straightforward installation in the clutch basket.

Each set is produced with a measured stack height intended to help restore the clutch to its original operating condition. Before installation, soak the friction plates in standard drive case oil for several hours to help prevent heat scorching during initial use. For best results, inspect the driven steel plates for wear and replace fatigued clutch springs. If the clutch was slipping before replacement, a complete EBC DRC or DRCF clutch kit may be a more suitable repair solution.

Fitment: 1992 Yamaha YFB 250, 250cc. This product contains friction plates only and is intended for powersports clutch applications. Review the existing clutch components and confirm application compatibility before installation. California Proposition 65 warning applies.

What's Included

• One EBC Powersports CK2287 CK Series full-engine friction plate set
• Installation consists of friction plates only; clutch springs and driven plates are not included

Features:

• Direct Replacement Fit: Designed to drop into the original clutch basket of the specified Yamaha application.
• OEM-Style Cork Material: Uses cork-based friction materials engineered for dependable clutch engagement and service performance.
• Measured Stack Height: Manufactured to help restore the clutch stack to its original specification when properly installed.
• Full Engine Friction Set: Includes the complete set of friction plates required for the clutch application, allowing worn original plates to be replaced together.

Air Freight Prohibited: false
Not Carb Approved: false
Ltl Freight Required: false
Prop 65: Y
Part Type: powersports
Epa: N/A
Carb Acknowledgement Required: false
Regular Stock: t
Units Per Sku: 1