EBC Powersports CK2309 CK Series Clutch Friction Plate Set for Yamaha YZ250, WR250 and FZ-07

If you need to replace worn original plates these are exactly the same technology, size and shape and drop right into your clutch basket. Plates must be oil soaked using standard drive case oil for a few hours before install to avoid heat scorching. Always replace tired clutch springs and check for wear on driven (non lined) plates. If clutch has been slipping before replacement a full DRC or DRCF kit may be a better choice. CK Series Clutch Plate Set; Full Engine Set; Friction Plates; OEM Style Cork Based Materials;

• Stack height measured to reset clutch as new
• Made with OEM-style cork based materials
• Full engine sets of friction plates only
• Made with OEM style cork based materials

Restore consistent clutch engagement with the EBC Powersports CK2309 CK Series Clutch Plate Set. Designed as a full-engine set of friction plates, this replacement set uses OEM-style cork-based friction material and is built to match the original plate technology, size, and shape. The plates are designed to drop directly into the clutch basket for a straightforward replacement when worn friction plates are affecting clutch performance.

Before installation, soak the friction plates in standard drivetrain oil for several hours. Proper oil saturation helps prevent heat scorching during initial operation. For best results, replace worn or weakened clutch springs at the same time and inspect the driven, non-lined plates for distortion, discoloration, or excessive wear. If the clutch was slipping before replacement, a complete EBC DRC or DRCF clutch kit may be a more suitable repair solution.

• Stack Height: Measured to help restore the clutch to like-new operating specifications
• Friction Material: OEM-style cork-based material for dependable clutch engagement
• Set Configuration: Full engine set containing friction plates only
• Installation Design: OEM-style sizing and shape for direct fitment in the original clutch basket
• Application Type: Powersports replacement clutch component
• Oil Preparation: Friction plates require pre-soaking in standard drivetrain oil before installation
• Service Recommendation: Inspect driven plates and replace tired clutch springs during installation
• Replacement Use: Suitable for restoring clutch function when friction plates are worn

The EBC Powersports CK2309 is listed for select Yamaha YZ250, WR250, FZ-07, and MT-07 applications. Verify the motorcycle year and model against the manufacturer's fitment information before ordering.

What's Included: One full-engine set of EBC Powersports CK Series friction clutch plates.

Features:

• Stack height measured to help reset clutch operation to like-new specifications
• OEM-style cork-based friction material provides reliable clutch engagement
• Full engine set of friction plates for a complete friction plate replacement
• Designed to match original plate size and shape for direct installation in the clutch basket

Fitments:
1988 Yamaha YZ250 Base
1989 Yamaha YZ250 Base
1989 Yamaha YZ250WR Base
1990 Yamaha YZ250 Base
1990 Yamaha YZ250WR Base
1991 Yamaha WR250 Base
1991 Yamaha YZ250 Base
1992 Yamaha WR250 Base
1992 Yamaha YZ250 Base
1993 Yamaha WR250 Base
2015 Yamaha FZ-07 Base
2016 Yamaha FZ-07 Base

Air Freight Prohibited: false
Not Carb Approved: false
Ltl Freight Required: false
Prop 65: Y
Part Type: powersports
Epa: N/A
Carb Acknowledgement Required: false
Regular Stock: t
Units Per Sku: 1