EBC Powersports CK4455 CK Series Clutch Friction Plate Set for Kawasaki and Suzuki

If you need to replace worn original plates these are exactly the same technology, size and shape and drop right into your clutch basket. Plates must be oil soaked using standard drive case oil for a few hours before install to avoid heat scorching. Always replace tired clutch springs and check for wear on driven (non lined) plates. If clutch has been slipping before replacement a full DRC or DRCF kit may be a better choice. CK Series Clutch Plate Set; Full Engine Set; Friction Plates; OEM Style Cork Based Materials;

• Stack height measured to reset clutch as new
• Made with OEM-style cork based materials
• Full engine sets of friction plates only
• Made with OEM style cork based materials

Restore dependable clutch engagement with the EBC Powersports CK4455 CK Series Clutch Plate Set. Designed as a full engine set of friction plates, this replacement kit uses OEM-style cork-based materials and is engineered to match the original plates in technology, size, and shape. The plates are designed to drop directly into the existing clutch basket when the related clutch components are in serviceable condition.

Before installation, soak the friction plates in standard drive case oil for several hours to help prevent heat scorching during initial operation. For best results, replace worn or weakened clutch springs and inspect the driven, non-lined plates for signs of wear, grooving, or distortion. If the clutch was slipping before replacement, a complete EBC DRC or DRCF clutch kit may be a more suitable repair solution. The EBC Powersports CK4455 is intended for powersports applications and includes friction plates only.

Fitment: This EBC Powersports CK4455 clutch plate set fits the 1983–1988 Kawasaki ZN1300 Voyager and the 2004 Suzuki VZ1600 Marauder. Verify the motorcycle model, year, and clutch configuration before installation.

What's Included

• Full engine set of EBC CK Series friction plates
• Installation and clutch components not included

Features:

• Full engine friction plate set: Provides the required friction plates for servicing the clutch assembly without replacing unrelated components.
• OEM-style cork-based material: Delivers original-equipment-style clutch performance and compatibility.
• Matched replacement design: Built to the original plate technology, size, and shape for direct installation in the clutch basket.
• Pre-set stack height: Stack height is measured to help restore the clutch assembly to its original operating specification.

Fitments:
1983 Kawasaki ZN1300 Voyager Base
1984 Kawasaki ZN1300 Voyager Base
1985 Kawasaki ZN1300 Voyager Base
1986 Kawasaki ZN1300 Voyager Base
1987 Kawasaki ZN1300 Voyager Base
1988 Kawasaki ZN1300 Voyager Base
2004 Suzuki VZ1600 Marauder Base

Air Freight Prohibited: false
Not Carb Approved: false
Ltl Freight Required: false
Prop 65: Y
Part Type: powersports
Epa: N/A
Carb Acknowledgement Required: false
Regular Stock: t
Units Per Sku: 1