EBC Powersports CK7009 CK Series Clutch Friction Plate Set for 1995 Harley-Davidson Dyna FXD Super Glide

If you need to replace worn original plates these are exactly the same technology, size and shape and drop right into your clutch basket. Plates must be oil soaked using standard drive case oil for a few hours before install to avoid heat scorching. Always replace tired clutch springs and check for wear on driven (non lined) plates. If clutch has been slipping before replacement a full DRC or DRCF kit may be a better choice. CK Series Clutch Plate Set; Full Engine Set; Friction Plates; OEM Style Cork Based Materials;

• Stack height measured to reset clutch as new
• Full engine sets of friction plates only
• Made with OEM style cork based materials

The EBC Powersports CK7009 CK Series Clutch Plate Set is a full-engine replacement set designed for the 1995 Harley-Davidson Dyna FXD Super Glide. These friction plates use OEM-style cork-based materials and match the original plate technology, shape, and fit for reliable installation in the factory clutch basket. The set is intended for replacing worn friction plates while helping restore consistent clutch engagement and smooth power transfer.

Before installation, soak the plates in standard primary or drive-case oil for several hours to help prevent heat scorching during initial operation. EBC Powersports measures the stack height to help reset the clutch to its original operating condition. For best results, inspect the driven, non-lined plates for wear and replace tired clutch springs during installation. If the clutch was slipping before replacement, a complete EBC DRC or DRCF clutch kit may be a more suitable repair solution.

Fitment: Designed for the 1995 Harley-Davidson Dyna FXD Super Glide with the applicable 1,690 cc engine configuration. Verify the motorcycle model, year, engine specification, and clutch requirements before ordering. The EBC Powersports CK7009 is supplied as a friction-plate-only set and does not include clutch springs or driven steel plates.

What's Included: One full-engine set of EBC CK Series clutch friction plates. Installation should follow the motorcycle manufacturer's service procedures and recommended lubricants.

Features:

• OEM-style cork-based friction material supports dependable clutch engagement and wear resistance
• Full-engine friction plate set provides a complete replacement for worn lined clutch plates
• Precisely measured stack height helps restore the clutch assembly to its original setup
• Direct-fit design matches the original plate technology, size, and shape for straightforward installation

Air Freight Prohibited: false
Not Carb Approved: false
Ltl Freight Required: false
Prop 65: Y
Part Type: powersports
Epa: N/A
Carb Acknowledgement Required: false
Regular Stock: t
Units Per Sku: 1