EBC Redstuff Ceramic Rear Brake Pads DP31538C for 1999-2003 Mitsubishi Lancer Evolution

it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation. Pad Dimensions: 76 x 65 x 14mm

• Great For Fast Street And Premium Sedan
• Ideal European Vehicle Brake Upgrade
• High Friction Low Heat Fade
• Lowest Dust Pad In Range

Upgrade the rear braking performance of your 1999-2003 Mitsubishi Lancer Evolution with EBC Redstuff ceramic brake pads, part number DP31538C. Designed for fast street driving, premium sedans, sport compacts, and hot hatches, these high-friction pads deliver strong stopping power with improved braking consistency and reduced noise compared with conventional pad materials.

With a nominal friction coefficient of 0.5, EBC Redstuff pads are engineered for repeated heavy braking while providing high resistance to heat fade. Testing has shown stopping distances up to 43 feet shorter than original-equipment pads from 100 mph under applicable conditions. The ceramic formulation also produces approximately 50 percent less dust than semi-metallic pads, helping keep wheels cleaner. Most EBC Redstuff pads are approved to the ECE R90 brake safety regulation.

Each pad features EBC's Brake-In surface coating, which conditions the brake rotor and helps accelerate the bedding process. Because this is a durable, high-performance pad, complete bedding may require as much as 1,000 miles of varied driving. Drivers should allow sufficient time for the pads to conform to the rotor surface before expecting maximum performance. The DP31538C set is intended for rear brake applications on the specified Mitsubishi Lancer Evolution and is supplied as one vehicle brake pad set.

Fitment: 1999-2003 Mitsubishi Lancer Evolution, rear axle.

Features:

• Fast Street Performance: Provides strong, consistent braking for spirited street driving and premium sedan applications.
• High Friction, Low Heat Fade: Delivers a nominal friction coefficient of 0.5 with dependable performance during repeated heavy braking.
• Reduced Brake Dust: Ceramic formulation produces approximately 50 percent less dust than semi-metallic pads for cleaner wheels.
• Brake-In Surface Coating: EBC Brake-In coating conditions the rotor surface and helps accelerate pad bedding.

Air Freight Prohibited: false
Not Carb Approved: false
Ltl Freight Required: false
Prop 65: Y
Part Type: automotive
Epa: N/A
Carb Acknowledgement Required: false
Regular Stock: t
Units Per Sku: 1