Eibach Adjustable Sway Bar End Links, M10 Bolt, 5.7-7.3 in Adjustable Length, Part Number eibUEL-10-145

Sway bar/stabilizer end links connect the sway bar to a fixed point on the suspension and are designed to transfer forces between the suspension and the sway bar. Adjustable end links are an upgrade over standard, non-adjustable end links that allow for the removal of potential sway bar interference and preload on vehicles with lower ride heights. Removing sway bar preload allows quick adjustment on bars with multiple settings. A properly set up sway bar leads to less body roll and thus, improved handling.

• Fully Adjustable End Link System for Tuning Sway Bar Preload on Lifted Vehicles
• A Range of Different Misalignment Spacers Sold Seperately
• Chromoly Rod Ends and Easy to Adjust Hex Bodies
• Made in the U.S.A.
• Sold as a pair

Eibach adjustable sway bar end links provide a reliable way to connect the sway bar to a fixed point on the suspension while allowing precise control over sway bar preload. Designed for lifted vehicles and modified suspension systems, the Eibach eibUEL-10-145 end links help reduce interference caused by changes in ride height and suspension geometry.

The adjustable design supports quick setup and tuning, especially when used with sway bars featuring multiple adjustment settings. Properly adjusted end links can help maintain balanced sway bar operation, reduce unwanted preload, and improve handling by limiting excessive body roll. Chromoly rod ends and easy-to-adjust hex bodies provide durable construction and straightforward installation adjustments.

• Adjustable Length: Adjusts from approximately 5.7 to 7.3 inches to accommodate lifted vehicle suspension configurations.
• M10 Bolt Diameter: Designed for applications using an M10 mounting bolt.
• Preload Tuning: Helps remove unwanted sway bar preload and allows precise suspension setup.
• Durable Construction: Built with chromoly rod ends and robust adjustable hex bodies.
• Suspension Clearance: Helps address potential sway bar interference caused by altered ride height.
• Handling Benefit: Proper setup can reduce body roll and improve vehicle response.
• Installation Quantity: Sold as a pair for complete replacement on one axle.
• Manufacturing: Made in the U.S.A.

What's Included: Two Eibach adjustable sway bar end links. Misalignment spacers are sold separately. Verify suspension configuration, mounting hardware, and required spacer selection before installation.

Fitment: Vehicle-specific fitment data was not provided. Confirm the required bolt diameter, adjustment range, mounting points, and suspension setup before ordering. Professional installation and alignment checks are recommended after installation.

Features:

• Adjustable end link system helps tune sway bar preload on lifted vehicles
• M10 bolt diameter supports compatible suspension mounting points
• Adjustable length range accommodates modified suspension geometry
• Chromoly rod ends and hex bodies provide durable, easy-to-adjust construction
• Helps reduce sway bar interference caused by changes in ride height
• Supports improved handling by helping limit excessive body roll
• Sold as a pair for one-axle installation
• Made in the U.S.A.

Air Freight Prohibited: false
Not Carb Approved: false
Ltl Freight Required: false
Prop 65: Y
Part Type: automotive
Epa: N/A
Carb Acknowledgement Required: false
Regular Stock: false
Units Per Sku: 1