Eibach Heavy-Duty Adjustable Sway Bar End Links eibUEL-10-245HD

Sway bar/stabilizer end links connect the sway bar to a fixed point on the suspension and are designed to transfer forces between the suspension and the sway bar. Adjustable end links are an upgrade over standard, non-adjustable end links that allow for the removal of potential sway bar interference and preload on vehicles with lower ride heights. Removing sway bar preload allows quick adjustment on bars with multiple settings. A properly set up sway bar leads to less body roll and thus, improved handling.

• Fully Adjustable End Link System for Tuning Sway Bar Preload
• A Range of Different Misalignment Spacers Sold Seperately
• Chromoly Rod Ends and Easy to Adjust Hex Bodies
• Made in the U.S.A.
• Sold as a pair

Eibach heavy-duty adjustable sway bar end links are designed to improve suspension setup flexibility on performance and lowered vehicles. The end links connect the sway bar to a fixed point on the suspension, transferring suspension forces efficiently while helping reduce unwanted sway bar interference and preload. By allowing precise adjustment, the Eibach eibUEL-10-245HD system helps optimize sway bar positioning for improved handling and more consistent suspension response.

Each end link uses chromoly rod ends and an easy-to-adjust hex body for reliable strength and convenient tuning. Adjustability is especially useful on vehicles with reduced ride height or sway bars with multiple adjustment settings, where correct geometry is important for minimizing bind and maintaining balanced suspension performance. Properly configured end links can help reduce body roll and support more predictable cornering behavior.

This Eibach adjustable end link set is made in the U.S.A. and sold as a pair. The system uses a 10 mm bolt diameter and provides an adjustable length range from approximately 9.65 to 10.83 inches. A range of misalignment spacers is available separately to help accommodate different suspension configurations. The Eibach eibUEL-10-245HD is intended for automotive suspension applications; verify vehicle-specific fitment and required spacer configuration before installation.

Product Specifications & Technical Data

• Brand: Eibach
• Part Number: eibUEL-10-245HD
• Product Type: Adjustable sway bar end link
• Application: Automotive suspension
• Bolt Diameter: 10 mm
• Minimum Adjustable Length: Approximately 9.65 inches
• Maximum Adjustable Length: Approximately 10.83 inches
• Country of Manufacture: United States

What's Included

• Two adjustable sway bar end links

Features:

• Fully adjustable end link system helps tune sway bar preload and suspension geometry
• Chromoly rod ends and adjustable hex bodies provide strength and convenient setup changes
• Adjustable length helps reduce sway bar interference on lowered vehicles
• Sold as a pair and manufactured in the U.S.A.

Air Freight Prohibited: false
Not Carb Approved: false
Ltl Freight Required: false
Prop 65: Y
Part Type: automotive
Epa: N/A
Carb Acknowledgement Required: false
Regular Stock: false
Clearance Item: t
Units Per Sku: 1