Fabtech - fabFTS98100-6BJ - 98-08 Ford Ranger 2WD Front Upper Control Arm Kit

Arms eliminate upper ball join w/super strong 1 ID stainless American uniball. Additional caster is built into arms for greater align ability to help with problematic leveling kit alignments. Allows for increased wheel travel when used w/Dirt Logic 2.5 coilover shocks. Chromoly tubing reduces flex found in stock arms for more positive road feel. 4340 heat treated uniball pin fits into factory ball join taper without modification to the spindle for easy return to stock feature. Arms are direct replacements for factory arms on suspensions that require additional strength and align ability. Control Arm Kit; For 2.5 and 5.5 in. Lift; Front Upper; Incl. Pre Installed Ball Joints; For PN[K2168/K2168M/K2170/K2108/K2109/K2108M/K2109M/K2170M];

• Regulates Wheel Motion In Relation To Body
• Custom Engineered For High Quality Ride
• Upper Control Arm Kit

The Fabtech fabFTS98100-6BJ Front Upper Control Arm Kit is designed for 1998-2008 Ford Ranger 2WD models with coil spring front suspension. This direct-replacement upper control arm kit is intended for suspensions with 2.5- or 5.5-inch lifts and includes pre-installed ball joints.

Key Features & Performance Benefits

• Stainless Steel Uniball: Uses a 1-inch stainless American uniball to eliminate the factory upper ball joint.
• Increased Alignment Capability: Built-in additional caster helps address alignment challenges associated with leveling kits.
• Improved Wheel Travel: Allows increased wheel travel when used with Dirt Logic 2.5 coilover shocks.
• Chromoly Construction: Chromoly tubing helps reduce flex compared with stock control arms for a more positive road feel.

Key Product Specifications & Technical Data

• Brand: Fabtech
• Part Number: fabFTS98100-6BJ
• Product Type: Front upper control arm kit
• Application: Ford Ranger 2WD with coil spring front suspension
• Lift Range: 2.5 and 5.5 inches
• Control Arm Position: Front upper
• Uniball Pin: 4340 heat-treated steel
• Installation: Direct replacement for factory arms; the uniball pin fits the factory ball joint taper without spindle modification

What's Included in the Box

One upper control arm kit with pre-installed ball joints.

Fitment

Fits 2004, 2005, 2006, and 2007 Ford Ranger models. The product data identifies the application as the 1998-2008 Ford Ranger 2WD with coil spring front suspension.

Fitments:
1998 Ford Ranger Splash
1998 Ford Ranger XL
1998 Ford Ranger XLT
1999 Ford Ranger XL
1999 Ford Ranger XLT
2000 Ford Ranger XL
2000 Ford Ranger XLT
2001 Ford Ranger XL
2001 Ford Ranger XLT
2002 Ford Ranger XL
2002 Ford Ranger XLT
2003 Ford Ranger XL
2003 Ford Ranger XLT
2004 Ford Ranger Tremor
2004 Ford Ranger XL
2004 Ford Ranger XLT
2005 Ford Ranger STX
2005 Ford Ranger XL
2005 Ford Ranger XLT
2006 Ford Ranger STX
2006 Ford Ranger XL
2006 Ford Ranger XLT
2007 Ford Ranger STX
2007 Ford Ranger XL
2007 Ford Ranger XLT
2008 Ford Ranger XL
2008 Ford Ranger XLT

Air Freight Prohibited: false
Not Carb Approved: false
Ltl Freight Required: false
Prop 65: Y
Part Type: automotive
Epa: N/A
Carb Acknowledgement Required: false
Regular Stock: t
Units Per Sku: 1