FOX Performance Factory Race Series 2.0 X2 Adjustable Coilover Reservoir Shock Kit for 2014-2018 Chevrolet Corvette C7

The C7 Corvette delivers speed from the factory, and a strong aftermarket catalog makes the chassis an ideal vehicle to configure into a dedicated track car or performance-oriented daily driver. FOX Factory Race Series 2.0 X2 shocks dramatically improve the car’s handling and driver confidence. TYPE III hard anodization prevents corrosion and wear of the 2.0-inch aluminum bodies. Converting the front suspension to a coil-over makes spring changes, ride height adjustment, and corner balancing easier. The Factory Race Series kit accommodates 0.75-1.5” of lowering. External reservoirs increase oil capacity and decrease the harshness associated with nitrogen ramp-up. Our ride engineers spent considerable time testing the Corvette. We tracked the car, drove the C7 on the street, and optimized the shock valving for various driving conditions. Fine-tune the vehicle’s damping with the 4-way adjuster, X2. Easily tune high-speed compression, high-speed rebound, low-speed compression, and low-speed rebound separately with 24 clicks each. The shock’s twin tube recirculating oil architecture coupled with X2 provides motorsport-level damping on the track, and 4-way adjustment allows for a comfortable drive home. The C7 Corvette is powerful and track-capable. With FOX, you can transform its ride dynamics to deliver more comfort over rough surfaces while feeling planted and stable through different track layouts and topography. Application specific valving to maximize performance FOX devotes countless hours of research and development to design race-winning suspension that withstands incredible punishment and provides consistent performance you can rely on. Regardless of whether you are flying high over the desert or struggling to stick to a rock face on an off-camber climb, our shocks will give you the damping performance, suspension control and proper spring rate to get the job done.

• 2.0 in. Impact-Extruded And CNC-Machined 6061-T6 TYPE III Anodized Aluminum Body
• 2.0” impact-extruded and CNC-machined 6061-T6 TYPE III anodized aluminum body
• Redundant Sealing Pack System - Main Seal; Wiper Seal; Scraper Seal
• Redundant sealing pack system: main seal, wiper seal, scraper seal
• External reservoir, with internal floating piston
• External Reservoir; with Internal Floating Piston
• Vehicle-specific tuning maximizes performance
• Patented rubber isolated spherical bearing
• 5/8 in. Hard Chromed Steel Shafts
• 5/8” hard chromed steel shafts

Transform the handling and ride control of your C7 Corvette with the FOX Performance Factory Race Series 2.0 X2 Adjustable Coilover Reservoir Shock Kit, part number FOX883-30-004. Designed specifically for the Chevrolet Corvette C7, this application-tuned suspension system is engineered for drivers who demand improved chassis control on the track without sacrificing street-driving comfort. FOX ride engineers tested the Corvette in both street and track environments to optimize damping across a wide range of conditions.

The kit converts the front suspension to a coilover configuration, making spring changes, ride-height adjustments, and corner balancing easier. It supports approximately 0.75 to 1.5 inches of lowering for a more performance-focused stance and improved handling response. External reservoirs increase oil capacity while helping reduce the harshness associated with nitrogen ramp-up. The patented X2 twin-tube, recirculating-oil architecture delivers motorsport-level damping control, while the 4-way adjuster provides independent tuning of high-speed compression, high-speed rebound, low-speed compression, and low-speed rebound through 24 clicks per adjustment range.

Durability is built into every FOX Performance shock. The impact-extruded and CNC-machined 6061-T6 aluminum bodies feature TYPE III hard anodization for enhanced resistance to corrosion and wear. Redundant main, wiper, and scraper seals help protect the shock internals, while hard-chromed steel shafts and patented rubber-isolated spherical bearings support consistent operation under demanding driving conditions. This kit fits 2014-2018 Chevrolet Corvette C7 applications, including model years 2014, 2015, 2016, 2017, and 2018. Professional installation and alignment are recommended after installation. This product is not CARB approved and may carry a California Proposition 65 warning.

What's Included

• FOX Performance Factory Race Series 2.0 X2 adjustable coilover reservoir shock kit
• Application-specific shock and damping configuration
• Integrated external reservoirs with internal floating pistons
• Vehicle-specific coilover suspension components

Features:

• Application-specific valving: Optimized for the Chevrolet Corvette C7 to improve handling, stability, and driver confidence on the street and track.
• 4-way X2 adjustment: Independently tunes high-speed compression, high-speed rebound, low-speed compression, and low-speed rebound with 24 clicks per adjustment range.
• External reservoirs: Increase oil capacity and help manage damping heat while reducing harshness caused by nitrogen ramp-up.
• Durable construction: Features 2.0-inch impact-extruded and CNC-machined 6061-T6 TYPE III anodized aluminum bodies, redundant sealing, hard-chromed steel shafts, and rubber-isolated spherical bearings.

Fitments:
2014 Chevrolet Corvette Stingray
2015 Chevrolet Corvette Stingray
2015 Chevrolet Corvette Z06
2016 Chevrolet Corvette Stingray
2016 Chevrolet Corvette Z06
2017 Chevrolet Corvette Grand Sport
2017 Chevrolet Corvette Stingray
2017 Chevrolet Corvette Z06
2018 Chevrolet Corvette Grand Sport
2018 Chevrolet Corvette Stingray
2018 Chevrolet Corvette Z06
2019 Chevrolet Corvette Grand Sport
2019 Chevrolet Corvette Stingray
2019 Chevrolet Corvette Z06
2019 Chevrolet Corvette ZR1

Air Freight Prohibited: false
Not Carb Approved: false
Carb Acknowledgement Required: false
Ltl Freight Required: false
Prop 65: Y
Part Type: automotive
Epa: N/A
Regular Stock: t
Units Per Sku: 1