ICON icoK22104 2020-2023 Jeep Gladiator 2.5-Inch Stage 4 Suspension System

The Stage 4 ICON 2.5” Suspension System for the Jeep Gladiator is the ideal setup for drastically improving on-road ride quality and overall performance for the daily driven application that will see frequent, moderate off-road use. This complete suspension system features 2.0 Aluminum Series shocks, 2.5” lift dual-rate front coil springs, a tubular steel fixed front lower link kit, billet front sway bar links, a triple-rate rear coil spring kit, a rear sway bar relocation kit, front and rear adjustable track bars, and all necessary hardware for install. This system provides an increase of over 30% front and 20% rear wheel travel and was designed around the use of a 35” tire. For those looking to run a 37” tire this can be achieved with the ICON Jeep JT Bump Stop Spacer Kit (Part #22071). 2020-UP JEEP GLADIATOR JT 2.5" STAGE 4 SUSPENSION SYSTEM TECH NOTE: ICON’s advertised lift heights are based around a typical Jeep JT build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher than advertised if installed on a stock weighted vehicle.

• “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
• Front lower links included for caster angle correction and improved front end articulation
• Triple rate rear coil springs with ICON-engineered droop, ride, and overload rates
• Dual rate front coil springs with lifetime guarantee against sagging/breakage
• Front and rear track bars ensure proper alignment and improved articulation
• 2.0 Aluminum Series shocks with vehicle specific valving
• Fits 35" tires (37" with extended bump stop spacer kit)
• Adjustable, billet aluminum front sway bar links
• Improves on and off-road ride quality over stock
• 100% bolt-on system makes for an easy install
• 33% front, 23% rear increase in wheel travel
• 2.5" lift height

The ICON Stage 4 Suspension System is designed for the 2020-2023 Jeep Gladiator JT and is intended to improve on-road ride quality, overall performance, articulation, and off-road capability for daily-driven vehicles that see frequent, moderate off-road use. This complete, 100% bolt-on system provides a 2.5-inch lift and is designed around 35-inch tires. A 37-inch tire setup can be achieved with the ICON Jeep JT Bump Stop Spacer Kit, part number 22071.

The system includes 2.0 Aluminum Series shocks with vehicle-specific valving, dual-rate front coil springs, triple-rate rear coil springs, tubular steel fixed front lower links, adjustable front sway bar links, front and rear adjustable track bars, a rear sway bar relocation kit, and necessary installation hardware. The front lower links support caster angle correction and improved front-end articulation, while the track bars help maintain proper alignment and articulation.

Key Specifications & Technical Data:

• Brand: ICON
• Part number: icoK22104
• Application: Jeep Gladiator JT
• Model years: 2020-2023
• Lift height: 2.5 inches
• Shock type: 2.0 Aluminum Series with vehicle-specific valving
• Designed tire size: 35 inches
• Wheel travel increase: 33% front and 23% rear

What's Included: 2.0 Aluminum Series shocks, dual-rate front coil springs, triple-rate rear coil springs, tubular steel fixed front lower links, adjustable billet aluminum front sway bar links, front and rear adjustable track bars, rear sway bar relocation kit, and installation hardware.

Fitment: 2020-2023 Jeep Gladiator JT.

Features:

• 2.5-Inch Lift: Raises the Jeep Gladiator for improved ground clearance and off-road capability.
• 2.0 Aluminum Series Shocks: Vehicle-specific valving supports improved on- and off-road ride quality.
• Increased Wheel Travel: Provides a stated 33% increase in front wheel travel and 23% increase in rear wheel travel.
• Coil Spring System: Dual-rate front and triple-rate rear coil springs are engineered for ride, droop, and overload performance.
• Front Lower Links: Tubular steel fixed lower links support caster angle correction and improved front-end articulation.
• Track Bars: Adjustable front and rear track bars help maintain proper alignment and improve articulation.
• Sway Bar Components: Adjustable billet aluminum front sway bar links and a rear sway bar relocation kit are included.
• 35-Inch Tire Design: Designed around 35-inch tires; 37-inch tires require the ICON Jeep JT Bump Stop Spacer Kit, part number 22071.

Fitments:
2020 Jeep Gladiator Altitude
2020 Jeep Gladiator Launch Edition
2020 Jeep Gladiator Overland
2020 Jeep Gladiator Rubicon
2020 Jeep Gladiator Sport
2020 Jeep Gladiator Sport S
2021 Jeep Gladiator 80th Anniversary
2021 Jeep Gladiator High Altitude
2021 Jeep Gladiator Overland
2021 Jeep Gladiator Rubicon
2021 Jeep Gladiator Sport
2021 Jeep Gladiator Sport S
2021 Jeep Gladiator Willys
2021 Jeep Gladiator Willys Sport
2022 Jeep Gladiator High Altitude
2022 Jeep Gladiator Overland
2022 Jeep Gladiator Rubicon
2022 Jeep Gladiator Sport
2022 Jeep Gladiator Sport S
2022 Jeep Gladiator Willys
2022 Jeep Gladiator Willys Sport

Air Freight Prohibited: false
Not Carb Approved: false
Ltl Freight Required: false
Prop 65: Y
Part Type: automotive
Epa: N/A
Carb Acknowledgement Required: false
Regular Stock: t
Units Per Sku: 1