K&N 69-1207TR Typhoon Short Ram Cold-Air Intake for Select 2003-2007 Honda Accord Models

The K&N 69-1207TR Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Honda Accord models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in relatively cooler air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of denser air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-1207TR cold-air intake consists of a black rubber topped K&N high-flow air filter that mounts near the driver side wheel well directing cooler outside air through free-flowing aluminum tubing into a short ram induction tube that delivers high volumes of clean, colder air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California or other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake. K&N's easy-to-install Typhoon cold air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tubes come in a red powder coat finish. Associated products: RX-4990DK Air Filter Wrap, RU-4960 Universal Clamp-On Air Filter, 99-5000 Filter Care Service Kit Aerosol

• K&N Million Mile Limited Warranty

Upgrade the air intake performance of your compatible Honda Accord with the K&N 69-1207TR Typhoon short ram cold-air intake system. Designed to replace the restrictive factory air filter and intake housing, this system uses free-flowing, mandrel-bent aluminum tubing to smooth and straighten airflow into the engine. The result is improved air volume, stronger throttle response, and a guaranteed power gain throughout the engine’s RPM range.

The K&N Engineering intake includes a red powder-coated aluminum tube and a black rubber-topped, high-flow conical air filter positioned to draw in cooler outside air. A water-repellent DryCharger filter wrap helps protect the filter from moisture while maintaining airflow. The reusable filter can typically go up to 100,000 miles between servicing intervals, depending on driving conditions. Installation is designed to be completed with common hand tools in approximately 90 minutes or less.

This intake is intended for select 2003-2007 Honda Accord applications, including compatible V6 configurations; verify the exact vehicle, engine, and model-year fitment before ordering. The K&N 69-1207TR carries a Million Mile Limited Warranty and is EPA compliant. California emissions eligibility should be confirmed for the specific vehicle application; the listed California Executive Order is D-269-37. The product may contain chemicals known to the State of California to cause cancer or reproductive harm.

What’s Included: K&N high-flow air filter, DryCharger filter wrap, red powder-coated aluminum intake tubing, clamps, mounting hardware, and installation components.

Features:

• High-Flow Air Induction: Replaces the restrictive factory intake components to increase airflow and support improved engine performance.
• Mandrel-Bent Aluminum Tubing: Provides a smooth, low-restriction airflow path with a durable red powder-coated finish.
• Reusable Conical Air Filter: Delivers high-volume filtration and can typically be serviced for up to 100,000 miles, depending on driving conditions.
• Moisture Protection: Includes a water-repellent DryCharger filter wrap to help shield the filter from moisture and debris.

Fitments:
2003 Honda Accord EX
2003 Honda Accord LX
2004 Honda Accord EX
2004 Honda Accord LX
2005 Honda Accord EX
2005 Honda Accord Hybrid
2005 Honda Accord LX
2005 Honda Accord SE
2006 Honda Accord EX
2006 Honda Accord Hybrid
2006 Honda Accord LX
2007 Honda Accord EX
2007 Honda Accord EX-L
2007 Honda Accord Hybrid
2007 Honda Accord LX
2007 Honda Accord Special Edition

Air Freight Prohibited: false
Not Carb Approved: false
Carb Eo Number: D-269-37
Ltl Freight Required: false
Prop 65: Y
Part Type: automotive
Epa: Compliant
Carb Acknowledgement Required: false
Regular Stock: t
Units Per Sku: 1