K&N 69-6540TB Typhoon Short Ram Air Intake, Blue, Mitsubishi Lancer

The K&N 69-6540TB Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Mitsubishi Lancer models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-6540TB air intake comes with a black rubber topped K&N high-flow air filter that installs into the previous air box space. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive blue powder-coat finish that's made to last and it accommodates the factory mass air sensor and a replacement silicone crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake. K&N's easy-to-install Typhoon air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tube comes in a blue powder coat finish. Associated products: RX-4730DK Air Filter Wrap, RU-4730 Universal Clamp-On Air Filter, 99-5000 Filter Care Service Kit Aerosol

• K&N Million Mile Limited Warranty

The K&N 69-6540TB Typhoon air intake system replaces the restrictive factory air filter and intake housing on select Mitsubishi Lancer models. Its free-flowing, mandrel-bent aluminum intake tube is designed to smooth and straighten airflow into the engine, helping support improved throttle response, acceleration, and usable power throughout the RPM range. The tube features a durable blue powder-coat finish and is engineered to accommodate the factory mass air sensor.

This K&N Typhoon system includes a black rubber-topped, high-flow conical air filter that installs in the original air box area. The reusable filter can provide service intervals of up to 100,000 miles, depending on driving conditions and maintenance practices. A replacement silicone crankcase vent hose is also included. Installation is designed to use existing factory mounting points and can typically be completed in 90 minutes or less with common hand tools.

Fitment includes select 2002-2006 Mitsubishi Lancer applications. Verify the exact vehicle, engine, and model-year application before ordering. This product is EPA compliant and carries California Air Resources Board Executive Order D-269-32 for applicable applications; emissions regulations may vary by vehicle and location. The K&N 69-6540TB is backed by the K&N Million Mile Limited Warranty. Associated products include the RX-4730DK air filter wrap, RU-4730 universal clamp-on air filter, and 99-5000 filter care service kit aerosol.

Brief Description

A blue K&N Typhoon short ram air intake system designed to improve airflow and support enhanced performance on select Mitsubishi Lancer models.

Key Product Specifications & Technical Data

• Brand: K&N Engineering
• Part Number: 69-6540TB
• Product Type: Typhoon short ram air intake system
• Intake Material: Mandrel-bent aluminum
• Finish: Blue powder coat
• Filter Type: Reusable high-flow conical air filter
• Sensor Compatibility: Factory mass air sensor provision
• Emissions Status: EPA compliant; CARB Executive Order D-269-32 for applicable applications

What's Included

• Blue aluminum intake tube
• K&N high-flow air filter
• Silicone crankcase vent hose
• Installation hardware and components

Features:

• Free-Flowing Airflow: Replaces the restrictive factory intake housing and filter to help smooth and straighten incoming air.
• Performance Support: Helps deliver improved throttle response, acceleration, and usable power throughout the engine's RPM range.
• Durable Construction: Uses a mandrel-bent aluminum intake tube with a long-lasting blue powder-coat finish.
• Reusable Filtration: Includes a high-flow conical air filter that may be serviceable for up to 100,000 miles, depending on driving conditions.

Fitments:
2002 Mitsubishi Lancer ES
2002 Mitsubishi Lancer LS
2002 Mitsubishi Lancer OZ Rally
2003 Mitsubishi Lancer ES
2003 Mitsubishi Lancer Evolution
2003 Mitsubishi Lancer LS
2003 Mitsubishi Lancer OZ Rally
2004 Mitsubishi Lancer ES
2004 Mitsubishi Lancer Evolution
2004 Mitsubishi Lancer LS
2004 Mitsubishi Lancer OZ Rally
2005 Mitsubishi Lancer ES
2005 Mitsubishi Lancer Evolution
2005 Mitsubishi Lancer Evolution MR
2005 Mitsubishi Lancer Evolution RS
2005 Mitsubishi Lancer OZ Rally
2005 Mitsubishi Lancer Ralliart
2006 Mitsubishi Lancer ES
2006 Mitsubishi Lancer Evolution
2006 Mitsubishi Lancer Evolution MR
2006 Mitsubishi Lancer Evolution RS
2006 Mitsubishi Lancer Evolution SE
2006 Mitsubishi Lancer OZ Rally
2006 Mitsubishi Lancer SE

Air Freight Prohibited: false
Not Carb Approved: false
Carb Eo Number: D-269-32
Ltl Freight Required: false
Prop 65: Y
Part Type: automotive
Epa: Compliant
Carb Acknowledgement Required: false
Regular Stock: t
Units Per Sku: 1