K&N Engineering 57-2524-2 Performance Cold Air Intake Kit for 1999–2004 Ford F-Series Super Duty 6.8L V10

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle. K&N's roto-molded cold air intake systems are guaranteed to provide an increase in horsepower and torque, and are protected by the K&N No-Hassle Lifetime Limited Warranty. Associated products: RF-1020DK Air Filter Wrap, RF-1020DL Air Filter Wrap, RF-1020DR Air Filter Wrap, RU-1044 Universal Clamp-On Air Filter, 99-5000 Filter Care Service Kit Aerosol

• K&N Million Mile Limited Warranty
• Will not void vehicle warranty

Improve airflow to your engine with the K&N Engineering 57-2524-2 Performance Cold Air Intake Kit. Designed for select 1999–2004 Ford F-Series Super Duty trucks equipped with the 6.8L V10 engine, this intake system uses a high-density polyethylene rotationally molded tube to help increase air volume and deliver a guaranteed improvement in horsepower and torque. The intake is engineered as a direct-fit replacement for the factory airbox and is typically installable in less than 90 minutes.

The system includes a washable and reusable K&N High-Flow Air Filter with oiled cotton filter media. Its oversized conical design can provide service intervals of up to 100,000 miles under normal highway driving conditions, reducing maintenance frequency compared with disposable filters. A custom heat shield helps isolate the intake from hot engine-bay air, supporting cooler, denser airflow during operation.

The K&N 57-2524-2 is backed by the K&N Million Mile Limited Warranty and is designed not to void the vehicle warranty. It is EPA compliant and carries California Air Resources Board Executive Order D-269-31 for applicable vehicle applications. Check local emissions regulations before installation. This product may expose you to chemicals known to the State of California to cause cancer or reproductive harm.

What's Included: Rotationally molded intake tube, washable and reusable high-flow air filter, custom heat shield, clamps, mounting hardware, and installation components.

Fitment: Fits select 1999–2004 Ford F-250 Super Duty and related Ford F-Series Super Duty applications with the 6.8L V10 engine. Verify the specific vehicle configuration and emissions requirements before purchase.

Key Specifications: Brand: K&N Engineering; Part Number: 57-2524-2; Product Type: Performance cold air intake kit; Engine Application: 6.8L V10; Filter Type: Washable and reusable oiled cotton; Intake Material: High-density polyethylene; Warranty: K&N Million Mile Limited Warranty; Emissions Status: EPA compliant with CARB EO D-269-31.

Features:

• High-flow performance: Rotationally molded HDPE intake tubing increases airflow volume to help improve horsepower and torque.
• Reusable air filtration: Oversized conical oiled cotton filter is washable, reusable, and designed for service intervals of up to 100,000 miles under normal highway driving conditions.
• Engine-bay heat protection: Custom heat shield helps reduce exposure to hot air for more consistent intake performance.
• Easy direct-fit installation: Vehicle-specific components and included mounting hardware allow typical installation in less than 90 minutes.

Fitments:
1999 Ford F-250 Super Duty Lariat
1999 Ford F-250 Super Duty XL
1999 Ford F-250 Super Duty XLT
1999 Ford F-350 Super Duty Lariat
1999 Ford F-350 Super Duty XL
1999 Ford F-350 Super Duty XLT
2000 Ford Excursion Limited
2000 Ford Excursion XLT
2000 Ford F-250 Super Duty Lariat
2000 Ford F-250 Super Duty XL
2000 Ford F-250 Super Duty XLT
2000 Ford F-350 Super Duty Lariat
2000 Ford F-350 Super Duty XL
2000 Ford F-350 Super Duty XLT
2001 Ford Excursion Limited
2001 Ford Excursion XLT
2001 Ford F-250 Super Duty Lariat
2001 Ford F-250 Super Duty XL
2001 Ford F-250 Super Duty XLT
2001 Ford F-350 Super Duty Lariat
2001 Ford F-350 Super Duty XL
2001 Ford F-350 Super Duty XLT
2002 Ford Excursion Limited
2002 Ford Excursion XLT
2002 Ford F-250 Super Duty Lariat
2002 Ford F-250 Super Duty XL
2002 Ford F-250 Super Duty XLT
2002 Ford F-350 Super Duty Lariat
2002 Ford F-350 Super Duty XL
2002 Ford F-350 Super Duty XLT
2003 Ford Excursion Eddie Bauer
2003 Ford Excursion Limited
2003 Ford Excursion XLT
2003 Ford F-250 Super Duty Lariat
2003 Ford F-250 Super Duty XL
2003 Ford F-250 Super Duty XLT
2003 Ford F-350 Super Duty King Ranch
2003 Ford F-350 Super Duty Lariat
2003 Ford F-350 Super Duty XL
2003 Ford F-350 Super Duty XLT
2004 Ford Excursion Eddie Bauer
2004 Ford Excursion Limited
2004 Ford Excursion XLS
2004 Ford Excursion XLT
2004 Ford F-250 Super Duty Harley-Davidson Edition
2004 Ford F-250 Super Duty King Ranch
2004 Ford F-250 Super Duty Lariat
2004 Ford F-250 Super Duty XL
2004 Ford F-250 Super Duty XLT
2004 Ford F-350 Super Duty Harley-Davidson Edition
2004 Ford F-350 Super Duty King Ranch
2004 Ford F-350 Super Duty Lariat
2004 Ford F-350 Super Duty XL
2004 Ford F-350 Super Duty XLT
2005 Ford Excursion Eddie Bauer
2005 Ford Excursion Limited
2005 Ford Excursion XLS
2005 Ford Excursion XLT

Air Freight Prohibited: false
Not Carb Approved: false
Carb Eo Number: D-269-31
Ltl Freight Required: false
Prop 65: Y
Part Type: automotive
Epa: Compliant
Carb Acknowledgement Required: false
Regular Stock: t
Units Per Sku: 1