K&N Engineering 57-2582 Performance Cold Air Intake Kit for 2011-2015 Ford F-250 Super Duty 6.7L V8

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle. K&N's roto-molded cold air intake systems are guaranteed to provide an increase in horsepower and torque, and are protected by the K&N No-Hassle Lifetime Limited Warranty. Associated products: RC-5282 Universal Clamp-On Air Filter, 99-5000 Filter Care Service Kit Aerosol

• K&N Million Mile Limited Warranty
• Will not void vehicle warranty

Brief Description: The K&N Engineering 57-2582 Performance Cold Air Intake Kit is designed for select 2011-2015 Ford F-250 Super Duty models equipped with the 6.7L V8 engine. Its high-density polyethylene rotationally molded tube increases airflow volume to the engine, helping deliver a guaranteed improvement in horsepower and torque. A custom heat shield helps reduce exposure to hot engine-bay air, while the system is typically installable in less than 90 minutes.

The intake includes an oversized, conical K&N High-Flow Air Filter made with washable, reusable oiled cotton filter media. Under normal highway driving conditions, the filter can provide service intervals of up to 100,000 miles. The K&N 57-2582 is backed by the K&N Million Mile Limited Warranty and is designed not to void the vehicle warranty. This application is EPA compliant and carries California Air Resources Board Executive Order D-269-57. Check vehicle and emissions requirements before installation.

Key Product Specifications & Technical Data:

• Brand: K&N Engineering
• Part Number: 57-2582
• Product Type: Automotive performance cold air intake kit
• Vehicle Application: Select 2011-2015 Ford F-250 Super Duty models
• Engine Application: 6.7L V8 diesel
• Filter Type: Washable and reusable oiled cotton high-flow air filter
• Emissions Compliance: EPA compliant and CARB approved under EO D-269-57
• Warranty: K&N Million Mile Limited Warranty

What's Included in the Box: Rotationally molded HDPE intake tube, oversized conical high-flow air filter, custom heat shield, intake hardware, and installation components. Associated service products include the RC-5282 Universal Clamp-On Air Filter and 99-5000 Filter Care Service Kit Aerosol.

Fitment: Fits select 2011-2015 Ford F-250 Super Duty trucks with the 6.7L V8 engine. Verify the exact model year, engine configuration, emissions certification, and application before ordering.

Features:

• High-Flow Airflow Design: The rotationally molded HDPE intake tube increases airflow volume to the engine for improved horsepower and torque potential.
• Washable Reusable Filter: The oversized conical oiled cotton filter can be cleaned and reused, with service intervals of up to 100,000 miles under normal highway driving conditions.
• Engine-Bay Heat Protection: A custom heat shield helps isolate incoming air from high temperatures within the engine compartment.
• Warranty and Emissions Compliance: Backed by the K&N Million Mile Limited Warranty, designed not to void the vehicle warranty, and approved under CARB Executive Order D-269-57.

Fitments:
2011 Ford F-250 Super Duty King Ranch
2011 Ford F-250 Super Duty Lariat
2011 Ford F-250 Super Duty XL
2011 Ford F-250 Super Duty XLT
2011 Ford F-350 Super Duty King Ranch
2011 Ford F-350 Super Duty Lariat
2011 Ford F-350 Super Duty XL
2011 Ford F-350 Super Duty XLT
2012 Ford F-250 Super Duty King Ranch
2012 Ford F-250 Super Duty Lariat
2012 Ford F-250 Super Duty XL
2012 Ford F-250 Super Duty XLT
2012 Ford F-350 Super Duty King Ranch
2012 Ford F-350 Super Duty Lariat
2012 Ford F-350 Super Duty XL
2012 Ford F-350 Super Duty XLT
2013 Ford F-250 Super Duty King Ranch
2013 Ford F-250 Super Duty Lariat
2013 Ford F-250 Super Duty Platinum
2013 Ford F-250 Super Duty XL
2013 Ford F-250 Super Duty XLT
2013 Ford F-350 Super Duty King Ranch
2013 Ford F-350 Super Duty Lariat
2013 Ford F-350 Super Duty Platinum
2013 Ford F-350 Super Duty XL
2013 Ford F-350 Super Duty XLT
2014 Ford F-250 Super Duty King Ranch
2014 Ford F-250 Super Duty Lariat
2014 Ford F-250 Super Duty Platinum
2014 Ford F-250 Super Duty XL
2014 Ford F-250 Super Duty XLT
2014 Ford F-350 Super Duty King Ranch
2014 Ford F-350 Super Duty Lariat
2014 Ford F-350 Super Duty Platinum
2014 Ford F-350 Super Duty XL
2014 Ford F-350 Super Duty XLT
2015 Ford F-250 Super Duty King Ranch
2015 Ford F-250 Super Duty Lariat
2015 Ford F-250 Super Duty Platinum
2015 Ford F-250 Super Duty XL
2015 Ford F-250 Super Duty XLT
2015 Ford F-350 Super Duty King Ranch
2015 Ford F-350 Super Duty Lariat
2015 Ford F-350 Super Duty Platinum
2015 Ford F-350 Super Duty XL
2015 Ford F-350 Super Duty XLT
2016 Ford F-250 Super Duty King Ranch
2016 Ford F-250 Super Duty Lariat
2016 Ford F-250 Super Duty Platinum
2016 Ford F-250 Super Duty XL
2016 Ford F-250 Super Duty XLT
2016 Ford F-350 Super Duty King Ranch
2016 Ford F-350 Super Duty Lariat
2016 Ford F-350 Super Duty Platinum
2016 Ford F-350 Super Duty XL
2016 Ford F-350 Super Duty XLT

Air Freight Prohibited: false
Not Carb Approved: false
Carb Eo Number: D-269-57
Ltl Freight Required: false
Prop 65: Y
Part Type: automotive
Epa: Compliant
Carb Acknowledgement Required: false
Regular Stock: t
Units Per Sku: 1