K&N Engineering 63-1145 AirCharger Performance Air Intake for Honda Talon 1000

The K&N 63-1145 AirCharger air intake system replaces the restrictive factory air filter and air intake housing in some Honda Talon models. K&N air intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The 63-1145 air intake comes with a K&N high-flow air filter which is protected from the elements with an enclosed filter housing. Air is directed through a free-flowing aluminum intake tube into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less. The tools needed are a ratchet set, a few wrenches, and flat blade screwdriver. K&N's easy to install air intake systems replace the restrictive factory air filter and air intake housing allowing for virtually unrestricted air flow. More air means more usable power and acceleration throughout the engine's RPM range. Associated products: 25-5167 Air Filter Foam Wrap, RU-5064 Universal Clamp-On Air Filter, 99-5000 Filter Care Service Kit Aerosol

• Washable & Reusable Air Filter: Includes a High-Flow Air Filter that can go up to 100,000 miles before cleaning under normal highway driving conditions.
• Designed to improve throttle response and engine sound
• Easy to install, usually in 90 minutes or less
• Replaces entire factory air intake system
• Free-flowing aluminum intake tubes
• Guaranteed to increase horsepower.
• Washable and reusable air filters

The K&N Engineering 63-1145 AirCharger performance air intake system replaces the restrictive factory air filter and intake housing on select Honda Talon 1000 models. Its free-flowing design smooths and straightens incoming air, helping the engine draw in more air for improved throttle response, acceleration, and usable power throughout the RPM range.

This K&N AirCharger system includes a washable and reusable high-flow air filter enclosed for added protection from the elements. Air travels through a free-flowing aluminum intake tube to the engine’s throttle body, supporting consistent airflow and a more responsive engine sound. The oversized cone-shaped filter may be used for up to 100,000 miles before service under normal highway driving conditions, though off-road environments may require more frequent cleaning.

Designed for a straightforward installation, the K&N Engineering 63-1145 typically installs in 90 minutes or less using common hand tools, including a ratchet set, wrenches, and a flat-blade screwdriver. The system is intended for off-road powersports applications and is not CARB approved. Fitment includes select 2019–2021 Honda Talon 1000R, Talon 1000X, and Talon 1000X-4 models, including versions equipped with FOX Live Valve. Verify the exact vehicle configuration before ordering.

Key Product Specifications & Technical Data

• Brand: K&N Engineering
• Part Number: 63-1145
• Product Type: AirCharger performance air intake system
• Application: Honda Talon 1000 powersports vehicles
• Filter Type: Washable and reusable high-flow cone air filter
• Intake Tube Material: Aluminum
• Installation Time: Typically 90 minutes or less
• Emissions Status: Not CARB approved; off-road use application

What's Included

• K&N high-flow washable and reusable air filter
• Enclosed filter housing
• Free-flowing aluminum intake tube
• Installation components and hardware

Fitment

Fits select 2019–2021 Honda SXS10S2R Talon 1000R, SXS10S2X Talon 1000X, and SXS10S4 Talon 1000X-4 models, including 2020–2021 Talon 1000X-4 FOX Live Valve applications.

Features:

• Washable and reusable high-flow air filter supports extended service intervals and can last up to 100,000 miles under normal highway driving conditions.
• Free-flowing aluminum intake tube helps smooth and straighten airflow to support improved throttle response, acceleration, and usable engine power.
• Enclosed filter housing helps protect the air filter from environmental exposure during off-road operation.
• Direct replacement for the factory air filter and intake housing, with a straightforward installation that typically takes 90 minutes or less.

Fitments:
2019 Honda SXS10S2R Talon 1000R Base
2019 Honda SXS10S2X Talon 1000X Base
2020 Honda SXS10S2R Talon 1000R Base
2020 Honda SXS10S2X Talon 1000X Base
2020 Honda SXS10S4 Talon 1000X-4 Base
2020 Honda SXS10S4 Talon 1000X-4 FOX Live Valve Base
2021 Honda SXS10S2R Talon 1000R Base
2021 Honda SXS10S2X Talon 1000X Base
2021 Honda SXS10S4 Talon 1000X-4 Base
2021 Honda SXS10S4 Talon 1000X-4 FOX Live Valve Base
2022 Honda SXS10S2R Talon 1000R Base
2022 Honda SXS10S2X Talon 1000X Base
2022 Honda SXS10S4 Talon 1000X-4 Base
2022 Honda SXS10S4 Talon 1000X-4 FOX Live Valve Base
2023 Honda SXS10S4 Talon 1000X-4 FOX Live Valve Base
2023 Honda SXS10S4 Talon 1000XS-4 Base
2024 Honda SXS10S2R Talon 1000R Base
2024 Honda SXS10S2X Talon 1000X Base
2024 Honda SXS10S4 Talon 1000X-4 FOX Live Valve Base
2025 Honda SXS10S2R Talon 1000R Base
2025 Honda SXS10S2X Talon 1000X Base
2025 Honda SXS10S4 Talon 1000X-4 FOX Live Valve Base

Air Freight Prohibited: false
Not Carb Approved: true
Ltl Freight Required: false
Prop 65: Y
Part Type: powersports
Epa: N/A
Carb Acknowledgement Required: false
Regular Stock: t
Units Per Sku: 1