K&N Engineering 63-1565 AirCharger Performance Cold Air Intake for Dodge Challenger, Charger and Chrysler 300 6.4L V8

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle. K&N's roto-molded cold air intake systems are guaranteed to provide an increase in horsepower and torque, and are protected by the K&N No-Hassle Lifetime Limited Warranty. Associated products: RF-1042DK Air Filter Wrap, RF-1042DL Air Filter Wrap, RF-1042DR Air Filter Wrap, RU-1042 Universal Clamp-On Air Filter, 99-5000 Filter Care Service Kit Aerosol

• Lasts Up To 100 000 Miles Before Service Required
• Will not void vehicle warranty

The K&N Engineering 63-1565 AirCharger performance cold air intake system is designed for select Dodge Challenger, Dodge Charger and Chrysler 300 models equipped with the 6.4L V8 engine. Its high-density polyethylene rotationally molded intake tube increases airflow to the engine, helping deliver improved horsepower and torque while maintaining a durable, vehicle-specific design. The system is engineered for a direct-fit installation and can typically be installed in less than 90 minutes using common hand tools.

A washable and reusable K&N High-Flow Air Filter uses oiled cotton filter media and an oversized conical design to support extended service intervals of up to 100,000 miles under normal highway driving conditions. A custom heat shield helps protect incoming air from elevated temperatures in the engine compartment. The K&N Engineering 63-1565 intake is backed by the K&N No-Hassle Lifetime Limited Warranty and is designed not to void the vehicle warranty.

Fitment: Fits select 2011–2015 Dodge Challenger, 2012–2014 Dodge Charger and 2012 Chrysler 300 models with the 6.4L V8 engine. Verify vehicle application before ordering. This intake is not legal for sale or use on pollution-controlled motor vehicles in California, and a required CARB acknowledgement applies. California emissions compliance may vary by vehicle application. Associated accessories include K&N RF-1042DK, RF-1042DL and RF-1042DR air filter wraps, RU-1042 universal clamp-on air filter and 99-5000 filter care service kit aerosol.

What's Included: Rotationally molded HDPE intake tube, washable and reusable high-flow air filter, custom heat shield and required intake hardware for installation.

Specifications: Brand: K&N Engineering; Part Number: 63-1565; Product Type: Performance cold air intake system; Engine Application: 6.4L V8; Filter Type: Washable and reusable oiled cotton; Intake Tube Material: High-density polyethylene; Service Interval: Up to 100,000 miles under normal highway driving conditions; Warranty: K&N No-Hassle Lifetime Limited Warranty.

Features:

• High-Flow Air Intake: Rotationally molded HDPE intake tubing increases airflow volume to the engine for enhanced performance potential.
• Horsepower and Torque Gains: K&N Engineering guarantees an increase in horsepower and torque when properly installed on the specified vehicle application.
• Reusable Performance Filter: Oversized conical air filter uses washable, reusable oiled cotton media and can last up to 100,000 miles between services under normal highway driving conditions.
• Engine-Bay Heat Protection: Custom heat shield helps reduce exposure to high-temperature air while supporting a straightforward installation typically completed in less than 90 minutes.

Fitments:
2011 Dodge Challenger SRT8
2012 Chrysler 300 SRT8
2012 Dodge Challenger SRT8
2012 Dodge Charger SRT8
2013 Chrysler 300 SRT8
2013 Chrysler 300 SRT8 Core
2013 Dodge Challenger SRT8
2013 Dodge Charger SRT8
2014 Chrysler 300 SRT8
2014 Dodge Challenger SRT8
2014 Dodge Charger SRT8
2015 Dodge Challenger Scat Pack
2015 Dodge Challenger SRT 392
2015 Dodge Charger R/T Scat Pack
2015 Dodge Charger SRT 392
2016 Dodge Challenger 392 Hemi Scat Pack Shaker
2016 Dodge Challenger R/T Scat Pack
2016 Dodge Challenger SRT 392
2016 Dodge Charger R/T Scat Pack
2016 Dodge Charger SRT 392
2017 Dodge Challenger R/T 392
2017 Dodge Challenger R/T Scat Pack
2017 Dodge Challenger SRT 392
2017 Dodge Challenger T/A 392
2017 Dodge Charger Daytona 392
2017 Dodge Charger R/T 392
2017 Dodge Charger R/T Scat Pack
2017 Dodge Charger SRT 392
2018 Dodge Challenger R/T 392
2018 Dodge Challenger R/T Scat Pack
2018 Dodge Challenger SRT 392
2018 Dodge Challenger T/A 392
2018 Dodge Charger Daytona 392
2018 Dodge Charger R/T 392
2018 Dodge Charger R/T Scat Pack
2018 Dodge Charger SRT 392
2019 Dodge Challenger R/T 392
2019 Dodge Challenger R/T Scat Pack
2019 Dodge Challenger R/T Scat Pack Widebody
2019 Dodge Charger Scat Pack
2020 Dodge Challenger R/T Scat Pack
2020 Dodge Challenger R/T Scat Pack Widebody
2020 Dodge Charger Scat Pack
2020 Dodge Charger Scat Pack 392 Widebody
2021 Dodge Challenger R/T Scat Pack
2021 Dodge Challenger R/T Scat Pack Shaker Widebody
2021 Dodge Challenger R/T Scat Pack Widebody
2021 Dodge Challenger T/A 392 Widebody
2021 Dodge Charger Scat Pack
2022 Dodge Challenger R/T Scat Pack
2022 Dodge Challenger R/T Scat Pack Widebody
2022 Dodge Charger Scat Pack
2022 Dodge Charger Scat Pack Widebody
2023 Dodge Challenger R/T Scat Pack
2023 Dodge Challenger R/T Scat Pack Widebody
2023 Dodge Charger Scat Pack
2023 Dodge Charger Scat Pack Widebody

Air Freight Prohibited: false
Not Carb Approved: true
Carb Acknowledgement Required: true
Ltl Freight Required: false
Prop 65: Y
Part Type: automotive
Epa: N/A
Regular Stock: t
Units Per Sku: 1