K&N Engineering 69-0021TS Typhoon Cold-Air Intake System for 2004-2008 Acura TL

The K&N 69-0021TS Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Acura TL models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in relatively cooler air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of denser air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-0021TS air intake comes with a black rubber topped K&N high-flow air filter that installs into the front, bottom inner fender to capture cooler outside air. Air is directed through the cold air tube and into a short ram intake tube that leads into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. K&N's easy-to-install Typhoon air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum tubes come in a silver powder coat finish. Associated products: RX-4730DK Air Filter Wrap, RU-4870 Universal Clamp-On Air Filter, 99-5000 Filter Care Service Kit Aerosol

• No-Hassle Lifetime Limited Warranty
• K&N Million Mile Limited Warranty

Upgrade the air intake performance of your compatible Acura TL with the K&N Engineering 69-0021TS Typhoon cold-air intake system. Designed to replace the restrictive factory air filter and intake housing, this system uses free-flowing, mandrel-bent aluminum tubing to smooth and straighten airflow into the engine. The improved airflow helps the engine draw in a greater volume of denser air, supporting stronger acceleration and a guaranteed power gain throughout the RPM range.

The K&N 69-0021TS features a silver powder-coated intake tube and a high-flow, black rubber-topped air filter positioned in the lower inner fender to draw in cooler outside air. A water-repellent DryCharger filter wrap helps protect the filter from moisture while maintaining airflow. Depending on driving conditions, the reusable air filter can be used for up to 100,000 miles before servicing is required. Installation is designed to be straightforward and can typically be completed in 90 minutes or less using common hand tools.

This Typhoon intake system is engineered for select 2004-2008 Acura TL applications, including models from 2004, 2005, 2006, 2007, and 2008. The K&N 69-0021TS carries a No-Hassle Lifetime Limited Warranty and K&N Million Mile Limited Warranty. It is EPA compliant and covered by California Air Resources Board Executive Order D-269-37; verify the specific vehicle application and emissions requirements before installation. This product may contain chemicals known to the State of California to cause cancer or reproductive harm.

Brief Description

A high-flow Typhoon cold-air intake system that replaces the factory intake assembly on select Acura TL models to reduce airflow restriction and improve engine breathing.

Key Features and Performance Benefits

• Mandrel-bent aluminum tubing promotes smooth, consistent airflow.
• High-flow filter helps reduce intake restriction and supports increased airflow.
• Lower inner-fender filter placement draws in relatively cooler outside air.
• DryCharger filter wrap helps protect the reusable filter from moisture.

Key Product Specifications and Technical Data

• Brand: K&N Engineering
• Part Number: 69-0021TS
• Product Type: Cold-air intake system
• Intake Material: Mandrel-bent aluminum
• Finish: Silver powder coat
• Filter Type: Reusable high-flow cone filter
• Emissions Status: EPA compliant; CARB EO D-269-37
• Warranty: No-Hassle Lifetime Limited Warranty and Million Mile Limited Warranty

What's Included in the Box

• Typhoon aluminum intake tubing
• K&N high-flow air filter
• DryCharger filter wrap
• Required intake hardware and installation components

Fitments:
2004 Acura TL Base
2005 Acura TL Base
2006 Acura TL Base
2007 Acura TL Base
2008 Acura TL Base

Air Freight Prohibited: false
Not Carb Approved: false
Carb Eo Number: D-269-37
Ltl Freight Required: false
Prop 65: Y
Part Type: automotive
Epa: Compliant
Carb Acknowledgement Required: false
Regular Stock: t
Units Per Sku: 1