K&N Engineering 69-6544TS Silver Typhoon Short Ram Intake for Mitsubishi Lancer 2.0L

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle. K&N's mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque, and are protected by the K&N No-Hassle Lifetime Limited Warranty. Associated products: RX-4990DK Air Filter Wrap, RU-4950 Universal Clamp-On Air Filter, 99-5000 Filter Care Service Kit Aerosol

• K&N Million Mile Limited Warranty
• Will not void vehicle warranty.

Upgrade the intake performance of your compatible Mitsubishi Lancer with the K&N Engineering 69-6544TS Silver Typhoon Short Ram Intake. This system is designed for select Lancer models equipped with the 2.0L four-cylinder engine and uses a mandrel-bent aluminum intake tube to support smoother airflow to the engine. The result is a guaranteed increase in horsepower and torque, while the short ram layout provides a direct, performance-oriented intake path within the engine compartment.

The system includes a washable and reusable K&N High-Flow Air Filter with oiled cotton filter media and an oversized conical design. Under normal highway driving conditions, the filter can be serviced at intervals of up to 100,000 miles, helping reduce long-term maintenance and replacement costs. A custom heat shield helps isolate the filter from hot engine-bay air, and the intake can typically be installed in less than 90 minutes using common hand tools.

The K&N Engineering 69-6544TS is backed by the K&N Million Mile Limited Warranty and will not void the vehicle warranty when properly installed. It is EPA compliant and carries California Air Resources Board Executive Order D-269-37 for applicable vehicle applications. Confirm vehicle configuration and emissions requirements before installation. This product may contain chemicals known to the State of California to cause cancer or reproductive harm.

Key Product Specifications and Technical Data

• Brand: K&N Engineering
• Part Number: 69-6544TS
• Product Type: Short ram cold air intake system
• Intake Tube Material: Mandrel-bent aluminum
• Filter Type: Washable and reusable oiled cotton conical filter
• Vehicle Application: Select Mitsubishi Lancer models with 2.0L four-cylinder engine
• Emissions Compliance: EPA compliant; CARB Executive Order D-269-37
• Warranty: K&N Million Mile Limited Warranty

What's Included in the Box

• Mandrel-bent aluminum intake tube
• K&N High-Flow Air Filter
• Custom heat shield
• Required intake hardware and installation components
• Installation instructions

Fitment includes select 2010–2014 Mitsubishi Lancer applications with the 2.0L engine. Verify the specific model year, engine configuration, and emissions certification before ordering.

Features:

• Performance Gain: Guaranteed increase in horsepower and torque for compatible Mitsubishi Lancer applications.
• Mandrel-Bent Aluminum Tube: Provides a smooth, direct airflow path with durable aluminum construction.
• Washable Reusable Filter: Includes an oiled cotton High-Flow Air Filter designed for extended service life.
• Heat Shield Protection: Helps reduce exposure to hot engine-bay air for more consistent intake performance.
• Extended Service Interval: The oversized conical filter can go up to 100,000 miles between services under normal highway driving conditions.
• Efficient Installation: Designed for typical installation in less than 90 minutes using common hand tools.
• Emissions Compliance: EPA compliant and covered by CARB Executive Order D-269-37 for applicable applications.
• Warranty Coverage: Backed by the K&N Million Mile Limited Warranty and designed not to void the vehicle warranty.

Fitments:
2008 Mitsubishi Lancer DE
2008 Mitsubishi Lancer ES
2008 Mitsubishi Lancer GTS
2009 Mitsubishi Lancer DE
2009 Mitsubishi Lancer ES
2009 Mitsubishi Lancer GTS
2009 Mitsubishi Lancer Ralliart
2010 Mitsubishi Lancer DE
2010 Mitsubishi Lancer ES
2010 Mitsubishi Lancer Evolution GSR
2010 Mitsubishi Lancer Evolution MR
2010 Mitsubishi Lancer Evolution MR Touring
2010 Mitsubishi Lancer Evolution SE
2010 Mitsubishi Lancer GTS
2010 Mitsubishi Lancer GTS Sportback
2010 Mitsubishi Lancer Ralliart
2010 Mitsubishi Lancer Ralliart Sportback
2011 Mitsubishi Lancer DE
2011 Mitsubishi Lancer ES
2011 Mitsubishi Lancer ES Sportback
2011 Mitsubishi Lancer Evolution GSR
2011 Mitsubishi Lancer Evolution MR
2011 Mitsubishi Lancer Evolution MR Touring
2011 Mitsubishi Lancer GTS
2011 Mitsubishi Lancer GTS Sportback
2011 Mitsubishi Lancer Ralliart
2011 Mitsubishi Lancer Ralliart Sportback
2012 Mitsubishi Lancer DE
2012 Mitsubishi Lancer ES
2012 Mitsubishi Lancer ES Sportback
2012 Mitsubishi Lancer Evolution GSR
2012 Mitsubishi Lancer Evolution MR
2012 Mitsubishi Lancer GT
2012 Mitsubishi Lancer GT Sportback
2012 Mitsubishi Lancer Ralliart
2012 Mitsubishi Lancer SE
2013 Mitsubishi Lancer DE
2013 Mitsubishi Lancer ES
2013 Mitsubishi Lancer ES Sportback
2013 Mitsubishi Lancer Evolution GSR
2013 Mitsubishi Lancer Evolution MR
2013 Mitsubishi Lancer GT
2013 Mitsubishi Lancer GT Sportback
2013 Mitsubishi Lancer Ralliart
2013 Mitsubishi Lancer SE
2014 Mitsubishi Lancer ES
2014 Mitsubishi Lancer ES Sportback
2014 Mitsubishi Lancer Evolution GSR
2014 Mitsubishi Lancer Evolution MR
2014 Mitsubishi Lancer GT
2014 Mitsubishi Lancer GT Sportback
2014 Mitsubishi Lancer Ralliart
2014 Mitsubishi Lancer SE

Air Freight Prohibited: false
Not Carb Approved: false
Carb Eo Number: D-269-37
Ltl Freight Required: false
Prop 65: Y
Part Type: automotive
Epa: Compliant
Carb Acknowledgement Required: false
Regular Stock: t
Units Per Sku: 1