KW V1 INOX-LINE Coilover Kit for 1995-2001 Audi A4 and S4 Quattro (B5/8D) - Part Number KWS10210032

The KW V1 INOX-LINE coilover kit is our entry point into our street performance lineup. The high-quality INOX-LINE stainless steel coilover struts, corrosion resistant springs, bumps stops and dampers that are optimally tuned by our engineers the result is a balanced and sporty feel specific to each vehicle application designed for long lasting driving pleasure. With KW V1 coilovers you can achieve maximum lowering within an approved lowering range that ensures a proper functioning suspension and adequate travel after your car is lowered. Even after years of use you can easily adjust the ride height thanks to the dirt resistant trapezoid thread and composite adjustment collar. KW INOX-LINE coilover rewards the sporty driver with its harmonious pre-configured setup. For each vehicle our engineers develop a specific damper setup and spring rate to increase the driving pleasure with an optimal balance of sportiness and practicality. As with all KW coilovers, the engineers at KW develop the vehicle-specific KW damper tuning and spring rates with comprehensive testing on the N?rburgring Nordschleife and in the KW 7-post chassis dynamics test center. Unlike a mass produced, generic coilover kit, KW coilovers are developed specifically for your vehicle. As a manufacturer, KW uses only its own resources, high quality components and the damper technology that was all developed in-house. With the KW V1 coilovers, body roll will be reduced during compression giving you the benefit of a more genuine and direct sporty handling while driving. The ideal system for customers who like to choose the custom lowering of their vehicle while counting on the extensive experience of our engineers to preset the dampers for the ultimate balance between sporty driving, comfort, and safety. For over 20 years, KW automotive has been the market leader and driving innovation as a manufacturer of individual suspension solutions for the road and in all types of motorsports. No matter where in the world, gearheads, automobile manufacturers and reputable tuners rely on our KW coilovers "Made in Germany". Every KW coilover kit undergoes extensive stress testing before production and is developed and manufactured exclusively in our company headquarters in Fichtenberg, a small in town in Germany, to meet the high standards of our KW quality management. For us as a German manufacturer, it goes without saying that our KW coilover kits will exceed the original equipment manufacturer quality and offer useful and innovative solutions. With an application list comprising more than 4,600 options KW guarantees an outstanding selection backed by our Limited Lifetime Warranty. 1995-2001 Audi A4, S4 (B5, 8D, B5S) Sedan + Avant; Quattro; 4WD incl. S4; all engines

• Elastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.
• With the preset damping paired with vehicle specific spring rates precisely tuned by our engineers, V1 coilovers provide an optimum balance of sportiness and comfort while driving. KW takes the guess work out of setup for you.
• Composite spring perch made from wear-resistant, friction-optimized polyamide composite encompassing a stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.
• Inox-Line Stainless Steel - Truly Permanent Corrosion Resistance. Inox-Line coatings will not wear off while adjusting the suspension making KW coilover struts 100 percent corrosion resistant with an unlimited lifespan.
• Seamless Ride Height Adjustment - the corrosion resistance of the Inox-line stainless steel and composite perches means easy ride height adjustability to help you dial in your preferred look.
• KW suspensions V1 coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany.
• Every single damper is dyno tested to ensure functionality and guarantee accuracy before being released for delivery.
• Limited Lifetime Warranty - Unlimited Mileage

The KW V1 INOX-LINE coilover kit, part number KWS10210032, is a vehicle-specific suspension upgrade for 1995-2001 Audi A4 and S4 Quattro models, including Sedan and Avant applications. Designed for drivers who want a customized lowered stance without sacrificing everyday usability, this kit combines preset damping with application-specific spring rates for a balanced blend of sporty handling, comfort, and safety.

KW engineers develop each V1 setup through extensive vehicle testing, including Nürburgring Nordschleife and 7-post chassis dynamics testing. The tuned dampers help reduce body roll during compression and provide more direct steering and handling response than standard suspension components. Ride height can be adjusted within the approved range using the corrosion-resistant trapezoid thread and composite adjustment collars, allowing the vehicle to be lowered while maintaining appropriate suspension travel and function.

KW INOX-LINE stainless steel struts provide lasting corrosion resistance, while the wear-resistant composite spring perches help prevent oxidation and support smooth adjustment over time. Elastomer bump stops with integrated dust protection help shield the piston rods and seals from water and road debris. Each damper is dyno tested before delivery, and every kit is hand built at KW’s headquarters in Fichtenberg, Germany. The kit is backed by KW’s limited lifetime warranty with unlimited mileage. This application fits Audi A4 Quattro models from 1996-2000 and the 2000 Audi S4, subject to exact vehicle configuration and application verification.

Features:

• Vehicle-Specific Damping: Preset damper tuning and spring rates are engineered for the Audi A4 and S4 Quattro platform to provide a balanced combination of responsive handling and daily-driving comfort.
• Adjustable Ride Height: Approved-range height adjustment lets drivers customize vehicle stance while preserving suitable suspension travel and proper operating function.
• INOX-LINE Stainless Steel Construction: Corrosion-resistant stainless steel struts and hardware help maintain long-term durability and reliable ride-height adjustment.
• Reduced Body Roll: Carefully matched dampers and springs improve chassis control and deliver a more direct, sporty driving response.

Fitments:
1996 Audi A4 Quattro Base
1997 Audi A4 Quattro Base
1998 Audi A4 Quattro Avant
1998 Audi A4 Quattro Base
1999 Audi A4 Quattro Avant
1999 Audi A4 Quattro Base
2000 Audi A4 Quattro Avant
2000 Audi A4 Quattro Base
2000 Audi S4 Base
2001 Audi A4 Quattro Avant
2001 Audi A4 Quattro Base
2001 Audi S4 Avant
2001 Audi S4 Base

Air Freight Prohibited: false
Not Carb Approved: false
Ltl Freight Required: false
Prop 65: N
Part Type: automotive
Epa: N/A
Carb Acknowledgement Required: false
Regular Stock: t
Units Per Sku: 1