KW V1 INOX-LINE Coilover Kit for 2006-2013 Audi A3 8P 2WD with Electronic Damping Control

The KW V1 INOX-LINE coilover kit is our entry point into our street performance lineup. The high-quality INOX-LINE stainless steel coilover struts, corrosion resistant springs, bumps stops and dampers that are optimally tuned by our engineers the result is a balanced and sporty feel specific to each vehicle application designed for long lasting driving pleasure. With KW V1 coilovers you can achieve maximum lowering within an approved lowering range that ensures a proper functioning suspension and adequate travel after your car is lowered. Even after years of use you can easily adjust the ride height thanks to the dirt resistant trapezoid thread and composite adjustment collar. KW INOX-LINE coilover rewards the sporty driver with its harmonious pre-configured setup. For each vehicle our engineers develop a specific damper setup and spring rate to increase the driving pleasure with an optimal balance of sportiness and practicality. As with all KW coilovers, the engineers at KW develop the vehicle-specific KW damper tuning and spring rates with comprehensive testing on the Nurburgring Nordschleife and in the KW 7-post chassis dynamics test center. Unlike a mass produced, generic coilover kit, KW coilovers are developed specifically for your vehicle. As a manufacturer, KW uses only it s own resources, high quality components and the damper technology that was all developed in-house. With the KW V1 coilovers, body roll will be reduced during compression giving you the benefit of a more genuine and direct sporty handling while driving. The ideal system for customers who like to choose the custom lowering of their vehicle while counting on the extensive experience of our engineers to preset the dampers for the ultimate balance between sporty driving, comfort, and safety. For over 20 years, KW automotive has been the market leader and driving innovation as a manufacturer of individual suspension solutions for the road and in all types of motorsports. No matter where in the world, gearheads, automobile manufacturers and reputable tuners rely on our KW coilovers "Made in Germany". Every KW coilover kit undergoes extensive stress testing before production and is developed and manufactured exclusively in our company headquarters in Fichtenberg, a small in town in Germany, to meet the high standards of our KW quality management. For us as a German manufacturer, it goes without saying that our KW coilover kits will exceed the original equipment manufacturer quality and offer useful and innovative solutions. With an application list comprising more than 4,600 options KW guarantees an outstanding selection backed by our Limited Lifetime Warranty. 2006-2013 Audi A3 (8P) with electronic damping control 2WD, all engines

• Elastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.
• With the preset damping paired with vehicle specific spring rates precisely tuned by our engineers, V1 coilovers provide an optimum balance of sportiness and comfort while driving. KW takes the guess work out of setup for you.
• Composite spring perch made from wear-resistant, friction-optimized polyamide composite encompassing a stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.
• Inox-Line Stainless Steel - Truly Permanent Corrosion Resistance. Inox-Line coatings will not wear off while adjusting the suspension making KW coilover struts 100 percent corrosion resistant with an unlimited lifespan.
• Seamless Ride Height Adjustment - the corrosion resistance of the Inox-line stainless steel and composite perches means easy ride height adjustability to help you dial in your preferred look.
• KW suspensions V1 coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany.
• Every single damper is dyno tested to ensure functionality and guarantee accuracy before being released for delivery.
• Limited Lifetime Warranty - Unlimited Mileage

The KW V1 INOX-LINE coilover kit is a vehicle-specific street performance suspension system designed for drivers who want adjustable ride height with a balanced combination of sporty handling, comfort, and everyday practicality. Engineered for the 2006-2013 Audi A3 8P with two-wheel drive and electronic damping control, this KW coilover system uses a pre-configured damper setup and application-specific spring rates to deliver predictable performance without the guesswork of manual damper tuning.

KW engineers develop each V1 application through extensive vehicle testing, including work at the Nürburgring Nordschleife and KW’s 7-post chassis dynamics test center. The result is reduced body roll, more direct steering response, and improved cornering control while maintaining suitable suspension travel within the approved lowering range. Ride height can be adjusted to suit your preferred stance, and the corrosion-resistant design helps preserve that adjustability over years of use.

The KW INOX-LINE construction combines stainless-steel coilover struts, corrosion-resistant springs, composite adjustment collars, and durable elastomer bump stops with integrated dust protection. The dirt-resistant trapezoid thread and friction-optimized composite spring perches allow smooth adjustment, while the stainless-steel inserts provide strength and long-term reliability. Each damper is dyno tested before delivery, and every kit is hand assembled at KW’s headquarters in Fichtenberg, Germany. KW backs the system with a limited lifetime warranty with unlimited mileage.

Product Specifications & Technical Data

• Brand: KW
• Part Number: KWS10210092
• Series: V1 INOX-LINE
• Application: Audi A3 8P
• Model Years: 2006-2013
• Drivetrain: Two-wheel drive
• Damping: Vehicle-specific preset damping
• Warranty: Limited lifetime warranty with unlimited mileage

What's Included in the Box

• KW V1 INOX-LINE coilover struts
• Vehicle-specific springs
• Preset dampers
• Composite spring perches and adjustment collars
• Elastomer bump stops with integrated dust protection
• Installation hardware and adjustment components
• Product documentation

Features:

• Corrosion-Resistant INOX-LINE Construction: Stainless-steel coilover struts, corrosion-resistant springs, and composite adjustment components help maintain long-term durability and ride-height adjustability.
• Vehicle-Specific Preset Damping: KW-engineered damping and spring rates provide a balanced blend of sporty handling, comfort, and safety without requiring manual damper tuning.
• Adjustable Ride Height: The dirt-resistant trapezoid thread and composite adjustment collars allow precise lowering within the approved range while preserving proper suspension function and travel.
• Improved Handling and Durability: Reduced body roll, direct response, dyno-tested dampers, protective bump stops, and a limited lifetime warranty support dependable street performance.

Fitments:
2006 Audi A3 Base
2007 Audi A3 Base
2008 Audi A3 Base
2009 Audi A3 Base
2010 Audi A3 Base
2010 Audi A3 TDI
2011 Audi A3 Base
2011 Audi A3 TDI
2012 Audi A3 Base
2012 Audi A3 TDI
2012 Volkswagen Golf R Base
2013 Audi A3 Base
2013 Audi A3 TDI
2013 Volkswagen Golf R Base

Air Freight Prohibited: false
Not Carb Approved: false
Ltl Freight Required: false
Prop 65: N
Part Type: automotive
Epa: N/A
Carb Acknowledgement Required: false
Regular Stock: false
Units Per Sku: 1