MBRP Armor Lite 5-Inch Turbo-Back Exhaust System mbrpS62220PLM for Ford F-250 and F-350 Super Duty 7.3L

THE BEST BANG FOR YOUR BUCK - ARMOR LITE Series exhaust systems are a value option with the same fitment, performance and sound as the premium products from MBRP. Heavy-gauge Aluminized Steel tubing helps to resist dings and dents caused by debris under your vehicle. This material can be a great choice for you if you live in a dry climate that doesn’t see much precipitation, or if you’re looking for great sound on a budget. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. Part numbers ending in P and PLM carry a 1-year warranty. MBRP, Stand out from the crowd with a performance exhaust system that sounds great. Armor Lite Turbo Back Exhaust System; 5in; Incl. 4 in. Turbo Down Pipe/Adapter/Ext. Pipes/Muffler DeletePipe/Over Axle Pipe; No Tip Incl.; Single Side Exit; OffRoad; Aluminized; 4in. Turbo Downpipe, No Tip Included. Not For Use On Vehicles Equipped With A Catalytic Converter.

• Heavy Duty Aluminized Steel, Fully Sealed Tubing for Rust Resistance. Enhanced Flow. Bolt-on Installation. MBRP Signature Styling and Sound.
• Can Improve Fuel Economy By 1-2 MPG
• Delivers A Rich mellow Exhaust Note
• Installs With Common Hand Tools
• Boosts Torque And Horsepower
• Improved Throttle Response
• Minimize Back Pressure
• Built To Perform
• 2 Year Warranty

The MBRP Armor Lite Turbo-Back Exhaust System is a value-focused performance upgrade for select Ford F-250 and F-350 Super Duty models equipped with the 7.3L engine. Part number mbrpS62220PLM delivers the fitment, sound, and performance benefits associated with MBRP systems while using durable aluminized steel tubing for a cost-conscious solution. This off-road exhaust system features a single-side exit configuration, a four-inch turbo downpipe, adapter, extension pipes, muffler-delete pipe, and over-axle pipe. No exhaust tip is included.

Mandrel-bent tubing helps maintain consistent internal airflow through each bend, reducing restrictions and minimizing back pressure. The result can be improved throttle response, stronger torque and horsepower, and better overall exhaust flow. The system produces a rich, mellow exhaust note and is designed for bolt-on installation using common hand tools. Heavy-gauge aluminized steel offers resistance to dents and corrosion, making it well suited to dry-climate applications and performance builds where value and sound are priorities.

• Feature: Heavy-duty aluminized steel tubing with sealed construction helps resist corrosion and under-vehicle debris damage.
• Feature: Mandrel-bent tubing supports smooth exhaust flow, reduced restriction, and improved engine breathing.
• Feature: Muffler-delete design delivers a rich, mellow exhaust note with MBRP signature styling.
• Feature: Bolt-on installation uses common hand tools and includes the turbo downpipe, adapter, extension pipes, and over-axle pipe.

Specifications and Technical Data

• Brand: MBRP
• Part Number: mbrpS62220PLM
• Series: Armor Lite
• System Type: Turbo-back exhaust system
• Outlet Configuration: Single-side exit
• Material: Aluminized steel
• Included Exhaust Components: Turbo downpipe, adapter, extension pipes, muffler-delete pipe, and over-axle pipe
• Emissions and Use: Off-road use; not for vehicles equipped with a catalytic converter; not CARB approved

What's Included

The box includes the MBRP Armor Lite turbo-back exhaust components listed above. An exhaust tip is not included. This system is intended for off-road applications and may not comply with emissions regulations in all areas. Fitment includes select 1999–2002 Ford F-250 and F-350 Super Duty models with the 7.3L engine; verify the vehicle configuration before ordering. The manufacturer lists a limited warranty for qualifying Armor Lite applications.

Features:

• Heavy-duty aluminized steel tubing helps resist corrosion, dents, and debris damage.
• Mandrel-bent tubing maintains smooth airflow and helps minimize exhaust back pressure.
• Muffler-delete design delivers a rich, mellow exhaust tone.
• Bolt-on installation is designed for use with common hand tools.
• Turbo-back configuration supports improved engine breathing and throttle response.
• Single-side exit layout provides MBRP performance styling without an included exhaust tip.
• Can contribute to improved torque, horsepower, and fuel economy when properly installed and tuned.
• Designed for select Ford F-250 and F-350 Super Duty 7.3L applications; off-road use only.

Fitments:
1999 Ford F-250 Super Duty Lariat
1999 Ford F-250 Super Duty XL
1999 Ford F-250 Super Duty XLT
1999 Ford F-350 Super Duty Lariat
1999 Ford F-350 Super Duty XL
1999 Ford F-350 Super Duty XLT
2000 Ford F-250 Super Duty Lariat
2000 Ford F-250 Super Duty XL
2000 Ford F-250 Super Duty XLT
2000 Ford F-350 Super Duty Lariat
2000 Ford F-350 Super Duty XL
2000 Ford F-350 Super Duty XLT
2001 Ford F-250 Super Duty Lariat
2001 Ford F-250 Super Duty XL
2001 Ford F-250 Super Duty XLT
2001 Ford F-350 Super Duty Lariat
2001 Ford F-350 Super Duty XL
2001 Ford F-350 Super Duty XLT
2002 Ford F-250 Super Duty Lariat
2002 Ford F-250 Super Duty XL
2002 Ford F-250 Super Duty XLT
2002 Ford F-350 Super Duty Lariat
2002 Ford F-350 Super Duty XL
2002 Ford F-350 Super Duty XLT
2003 Ford F-250 Super Duty Lariat
2003 Ford F-250 Super Duty XL
2003 Ford F-250 Super Duty XLT
2003 Ford F-350 Super Duty King Ranch
2003 Ford F-350 Super Duty Lariat
2003 Ford F-350 Super Duty XL
2003 Ford F-350 Super Duty XLT

Air Freight Prohibited: false
Not Carb Approved: true
Carb Acknowledgement Required: true
Ltl Freight Required: false
Prop 65: Y
Part Type: automotive
Epa: N/A
Regular Stock: t
Units Per Sku: 1