MBRP Armor Lite Cat-Back Exhaust System S62260PLM for Ford F-250 and F-350 Super Duty 6.0L

THE BEST BANG FOR YOUR BUCK - ARMOR LITE Series exhaust systems are a value option with the same fitment, performance and sound as the premium products from MBRP. Heavy-gauge Aluminized Steel tubing helps to resist dings and dents caused by debris under your vehicle. This material can be a great choice for you if you live in a dry climate that doesn’t see much precipitation, or if you’re looking for great sound on a budget. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. Part numbers ending in P and PLM carry a 1-year warranty. MBRP, Stand out from the crowd with a performance exhaust system that sounds great. Armor Lite Cat Back Exhaust System; 5 in.; Incl. Adapter Extension Pipe/Muffler Delete Pipe/Over Axle Pipe/Tailpipe/Hardware; No Tip Incl.; Single Side Exit; Aluminized; No Tip Included. No Muffler.

• Heavy Duty Aluminized Steel, Fully Sealed Tubing for Rust Resistance. Enhanced Flow. Bolt-on Installation. MBRP Signature Styling and Sound.
• Delivers A Rich mellow Exhaust Note
• Can Improve Fuel Economy By 1-2 MPG
• Installs With Common Hand Tools
• Boosts Torque And Horsepower
• Improved Throttle Response
• Minimize Back Pressure
• Built To Perform
• 2 Year Warranty

The MBRP Armor Lite Cat-Back Exhaust System, part number S62260PLM, is designed for Ford F-250 and F-350 Super Duty models equipped with the 6.0L engine. This value-focused system delivers the fitment, performance, and sound expected from MBRP while using heavy-gauge aluminized steel for dependable service in dry climates and everyday driving conditions. The single-side exit configuration provides a clean appearance, while the no-muffler design produces a deeper, more direct exhaust tone.

Mandrel-bent tubing helps maintain a smooth interior passage through each bend, minimizing restrictions and supporting improved exhaust flow. The system is engineered to reduce back pressure and may contribute to stronger throttle response, increased torque and horsepower, and improved fuel economy depending on vehicle condition and driving habits. Fully sealed tubing helps resist corrosion, and the bolt-on design can be installed with common hand tools. This system includes the adapter extension pipe, muffler delete pipe, over-axle pipe, tailpipe, and installation hardware. No exhaust tip is included.

• Fitment: Designed for select 2003-2007 Ford F-250 and F-350 Super Duty applications with the 6.0L engine
• Material: Heavy-gauge aluminized steel for corrosion resistance in suitable environments
• Tube Design: Mandrel-bent tubing supports smooth exhaust flow and reduced restriction
• Exit Configuration: Single-side exit with no exhaust tip included
• System Design: Cat-back, muffler-delete configuration for a rich, mellow exhaust note
• Installation: Bolt-on installation using common hand tools
• Performance: Helps minimize back pressure and improve throttle response, torque, and horsepower
• Coverage: Part numbers ending in P and PLM carry a 1-year warranty; product listing also specifies a 2-year warranty

What's Included: Adapter extension pipe, muffler delete pipe, over-axle pipe, tailpipe, and installation hardware. No muffler or exhaust tip is included. Verify the vehicle configuration and application details before ordering. This product is not CARB approved, and California buyers may need to acknowledge applicable emissions requirements.

Features:

• Heavy-gauge aluminized steel tubing helps resist corrosion, dings, and dents in suitable driving environments.
• Mandrel-bent tubing maintains smooth internal passages for improved exhaust flow and reduced restriction.
• Muffler-delete design delivers a deeper, richer exhaust tone without including a muffler or exhaust tip.
• Bolt-on installation is designed for use with common hand tools and includes the required installation hardware.

Fitments:
2003 Ford F-250 Super Duty Lariat
2003 Ford F-250 Super Duty XL
2003 Ford F-250 Super Duty XLT
2003 Ford F-350 Super Duty King Ranch
2003 Ford F-350 Super Duty Lariat
2003 Ford F-350 Super Duty XL
2003 Ford F-350 Super Duty XLT
2004 Ford F-250 Super Duty Harley-Davidson Edition
2004 Ford F-250 Super Duty King Ranch
2004 Ford F-250 Super Duty Lariat
2004 Ford F-250 Super Duty XL
2004 Ford F-250 Super Duty XLT
2004 Ford F-350 Super Duty Harley-Davidson Edition
2004 Ford F-350 Super Duty King Ranch
2004 Ford F-350 Super Duty Lariat
2004 Ford F-350 Super Duty XL
2004 Ford F-350 Super Duty XLT
2005 Ford F-250 Super Duty Harley-Davidson Edition
2005 Ford F-250 Super Duty King Ranch
2005 Ford F-250 Super Duty Lariat
2005 Ford F-250 Super Duty XL
2005 Ford F-250 Super Duty XLT
2005 Ford F-350 Super Duty Harley-Davidson Edition
2005 Ford F-350 Super Duty King Ranch
2005 Ford F-350 Super Duty Lariat
2005 Ford F-350 Super Duty XL
2005 Ford F-350 Super Duty XLT
2006 Ford F-250 Super Duty Harley-Davidson Edition
2006 Ford F-250 Super Duty King Ranch
2006 Ford F-250 Super Duty Lariat
2006 Ford F-250 Super Duty XL
2006 Ford F-250 Super Duty XLT
2006 Ford F-350 Super Duty Harley-Davidson Edition
2006 Ford F-350 Super Duty King Ranch
2006 Ford F-350 Super Duty Lariat
2006 Ford F-350 Super Duty XL
2006 Ford F-350 Super Duty XLT
2007 Ford F-250 Super Duty Harley-Davidson Edition
2007 Ford F-250 Super Duty King Ranch
2007 Ford F-250 Super Duty Lariat
2007 Ford F-250 Super Duty XL
2007 Ford F-250 Super Duty XLT
2007 Ford F-350 Super Duty Harley-Davidson Edition
2007 Ford F-350 Super Duty King Ranch
2007 Ford F-350 Super Duty Lariat
2007 Ford F-350 Super Duty XL
2007 Ford F-350 Super Duty XLT

Air Freight Prohibited: false
Not Carb Approved: false
Carb Acknowledgement Required: true
Ltl Freight Required: false
Prop 65: Y
Part Type: automotive
Epa: N/A
Regular Stock: t
Units Per Sku: 1