MBRP Armor Lite S4806AL Cat-Back Exhaust System for Scion FR-S, Subaru BRZ and Toyota GR86
MBRP Armor Lite S4806AL Cat-Back Exhaust System for Scion FR-S, Subaru BRZ and Toyota GR86
MBRP -
Couldn't load pickup availability
- Fully Sealed Tubing for Rust Resistance. Bolt-On Installation. Smooth Mandrel Bent Tubing. Up to 3HP Gains. Up to 3ft-lbs Torque Gains. Up to 60% Flow Increase. 5" OD Out Tip Included.
- Improved Torque And Horsepower
- Lower Exhaust Gas Temperatures
- Increased Throttle Response
- Utilizes OEM Hangers
- Bolt On Design
Brief Description: Upgrade your vehicle with the MBRP Armor Lite S4806AL Cat-Back Performance Exhaust System, engineered to deliver improved exhaust flow, responsive performance, and an aggressive exhaust note. This value-focused system uses heavy-gauge aluminized steel tubing and is designed for a bolt-on installation using factory hangers.
Performance Benefits: Mandrel-bent tubing helps maintain a smooth internal surface through each bend, supporting efficient exhaust flow and consistent engine performance. The system may provide gains of up to 3 horsepower, 3 lb-ft of torque, and a 60% increase in flow, depending on vehicle configuration and supporting modifications. Improved throttle response and lower exhaust gas temperatures can contribute to a more responsive driving experience.
Key Product Specifications and Technical Data:
- Brand: MBRP
- Part Number: S4806AL
- Series: Armor Lite
- System Type: Cat-back performance exhaust
- Inlet Tubing: 3-inch tubing
- Exit Configuration: Single rear exit
- Material: Heavy-gauge aluminized steel
- Outlet Tip: 5-inch outside diameter tip
What's Included: One MBRP Armor Lite cat-back exhaust system with mandrel-bent tubing, muffler, hardware, and a 5-inch outlet tip. The bolt-on design is intended to use OEM hangers for a straightforward installation.
Fitment: Designed for select 2013–2016 Scion FR-S, 2013–2015 Subaru BRZ, and 2017–2022 Toyota GR86 applications. Confirm vehicle year, model, drivetrain, and exhaust configuration before ordering. This product is not CARB approved where applicable; review local emissions regulations before installation. California Proposition 65 warnings may apply.
Features:
- Heavy-gauge aluminized steel tubing helps resist dents and corrosion in dry-climate applications.
- Mandrel-bent 3-inch tubing promotes smooth exhaust flow without restrictive rippling in the bends.
- Performance design may deliver up to 3 horsepower, 3 lb-ft of torque, and a 60% flow increase.
- Bolt-on installation uses OEM hangers and includes a single rear exit with a 5-inch outlet tip.
Fitments:
2013 Scion FR-S Base
2013 Subaru BRZ Limited
2013 Subaru BRZ Premium
2014 Scion FR-S Base
2014 Subaru BRZ Limited
2014 Subaru BRZ Premium
2015 Scion FR-S Base
2015 Subaru BRZ Limited
2015 Subaru BRZ Premium
2015 Subaru BRZ Series.Blue
2016 Scion FR-S Base
2016 Subaru BRZ Limited
2016 Subaru BRZ Premium
2016 Subaru BRZ Series.HyperBlue
2017 Subaru BRZ Limited
2017 Subaru BRZ Premium
2017 Subaru BRZ Series.Yellow
2017 Toyota 86 Base
2018 Subaru BRZ Limited
2018 Subaru BRZ Premium
2018 Subaru BRZ TS
2018 Toyota 86 Base
2018 Toyota 86 GT
2019 Subaru BRZ Limited
2019 Subaru BRZ Premium
2019 Subaru BRZ Series.Gray
2019 Toyota 86 Base
2019 Toyota 86 GT
2019 Toyota 86 TRD Special Edition
2020 Subaru BRZ Limited
2020 Subaru BRZ TS
2020 Toyota 86 Base
2020 Toyota 86 GT
2020 Toyota 86 Hakone Edition
2022 Subaru BRZ Limited
2022 Subaru BRZ Premium
2022 Toyota GR86 Base
2022 Toyota GR86 Premium
2023 Subaru BRZ Limited
2023 Subaru BRZ Premium
2023 Toyota GR86 Base
2023 Toyota GR86 Premium
2024 Subaru BRZ Limited
2024 Subaru BRZ Premium
2024 Subaru BRZ TS
2024 Toyota GR86 Base
2024 Toyota GR86 Premium
2024 Toyota GR86 TRUENO Edition
2025 Subaru BRZ Limited
2025 Subaru BRZ Premium
2025 Subaru BRZ TS
2025 Toyota GR86 Base
2025 Toyota GR86 Hakone Edition
2025 Toyota GR86 Premium
2026 Subaru BRZ Limited
2026 Subaru BRZ Series.Yellow
2026 Subaru BRZ TS
2026 Toyota GR86 Base
2026 Toyota GR86 Premium
| Air Freight Prohibited: false |
| Not Carb Approved: false |
| Carb Acknowledgement Required: true |
| Ltl Freight Required: false |
| Prop 65: Y |
| Part Type: automotive |
| Epa: N/A |
| Regular Stock: t |
| Units Per Sku: 1 |
Fitments
Fitments
Materials
Materials
Shipping & Returns
Shipping & Returns
Dimensions
Dimensions
Care Instructions
Care Instructions
Share
