MBRP Armor Plus Cat-Back Exhaust System mbrpS5530409 for 2012–2014 Jeep Wrangler 3.6L V6

RELIABILITY BACKED FOR A LIFETIME - ARMOR PLUS Series exhaust systems are crafted from corrosion-resistant T409 Stainless Steel - a value-oriented material designed to protect from penetrating rust and will stand up to almost anything you can throw at it. T409 Stainless Steel tubing is easy to clean. If you’re looking for a performance exhaust system with a Lifetime Warranty, this is probably the one for you. If you don’t find yourself faced with lots of precipitation and salt, this is all you’re ever going to need. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. It's important to note that T409 Stainless Steel is resistant to penetrating rust but winter conditions, heavy salt air, and road treatments might accelerate the corrosion process, these conditions are not covered by MBRP's manufacturer warranty unless the part or system fails completely. When it comes to a performance exhaust system, choose the MBRP ARMOR PLUS Series for a reliable option backed for a lifetime. MBRP, Stand out from the crowd with a performance exhaust system that sounds great. Armor Plus Cat Back Exhaust System; 2.5 in.; Incl. Ext. Pipe/Overaxle Pipe/Offroad Tailpipe/Muffler/Hardware/No Tip; Muffler Before Axle; Single Rear Exit; T409 Stainless Steel; No Tip Required. This Exhaust has an Aggressive Exhaust Tone.

• Rugged T409 Stainless Steel Construction. Bolt-on Installation. MBRP Signature Styling and Sound.
• Stainless Steel Tips Are Included
• Improved Torque And Horsepower
• Lower Exhaust Gas Temperatures
• Increased Throttle Response
• Limited Lifetime Warranty
• Utilizes OEM Hangers
• Mellow Exhaust Note
• Bolt On Design

Upgrade the sound and performance of your 2012–2014 Jeep Wrangler with the MBRP Armor Plus Cat-Back Exhaust System, Part Number mbrpS5530409. Designed for 3.6L V6 applications, this single-rear-exit system features a 2.5-inch exhaust layout, an off-road tailpipe, an over-axle pipe, an extension pipe, and a muffler positioned before the axle. The system delivers an aggressive exhaust tone while maintaining a practical, bolt-on design that utilizes factory exhaust hangers.

Constructed from corrosion-resistant T409 stainless steel, the MBRP Armor Plus system is engineered to provide dependable service in everyday driving and off-road environments. Mandrel-bent tubing helps maintain a smooth internal passage through each bend, supporting efficient exhaust flow and improved throttle response. The result can include enhanced torque, horsepower, and lower exhaust gas temperatures compared with a restrictive factory exhaust system. The tubing is also easy to clean and offers strong resistance to penetrating rust; however, heavy road salt, winter treatments, and salt air may accelerate surface corrosion and are subject to MBRP warranty limitations.

• Fitment: Fits select 2012–2014 Jeep Wrangler models equipped with the 3.6L V6 engine, including Rubicon applications. Verify vehicle configuration before installation.
• Warranty: Backed by MBRP's limited lifetime warranty.
• Installation: Bolt-on installation is designed to use OEM hangers and supplied hardware.
• Emissions: This product is not CARB approved and may require emissions compliance verification before use in regulated areas.

What's Included: Extension pipe, over-axle pipe, off-road tailpipe, muffler, stainless steel exhaust components, and installation hardware. No exhaust tip is required for this configuration. The MBRP Armor Plus Cat-Back Exhaust System combines durable construction, improved exhaust flow, and signature MBRP sound in a straightforward replacement system for compatible Jeep Wrangler applications.

Features:

• T409 stainless steel construction helps resist penetrating rust and provides durable service in everyday and off-road conditions.
• Mandrel-bent 2.5-inch tubing supports smooth exhaust flow by minimizing restrictions through the bends.
• Single rear exit with a pre-axle muffler and off-road tailpipe produces an aggressive MBRP exhaust tone.
• Bolt-on design uses OEM hangers and included hardware for a straightforward installation.
• Designed to support improved torque, horsepower, throttle response, and lower exhaust gas temperatures.
• Easy-to-clean stainless steel tubing provides a practical finish for regular maintenance.
• No exhaust tip is required for this system configuration.
• Covered by MBRP's limited lifetime warranty, subject to applicable terms and conditions.

Fitments:
2012 Jeep Wrangler Rubicon
2012 Jeep Wrangler Sahara
2012 Jeep Wrangler Sport
2013 Jeep Wrangler Rubicon
2013 Jeep Wrangler Sahara
2013 Jeep Wrangler Sport
2013 Jeep Wrangler Unlimited Rubicon
2013 Jeep Wrangler Unlimited Sahara
2013 Jeep Wrangler Unlimited Sport
2014 Jeep Wrangler Rubicon
2014 Jeep Wrangler Sahara
2014 Jeep Wrangler Sport
2014 Jeep Wrangler Unlimited Rubicon
2014 Jeep Wrangler Unlimited Sahara
2014 Jeep Wrangler Unlimited Sport
2015 Jeep Wrangler Rubicon
2015 Jeep Wrangler Sahara
2015 Jeep Wrangler Sport
2015 Jeep Wrangler Unlimited Rubicon
2015 Jeep Wrangler Unlimited Sahara
2015 Jeep Wrangler Unlimited Sport
2016 Jeep Wrangler 75th Anniversary
2016 Jeep Wrangler Rubicon
2016 Jeep Wrangler Sahara
2016 Jeep Wrangler Sport
2016 Jeep Wrangler Sport S
2016 Jeep Wrangler Unlimited 75th Anniversary
2016 Jeep Wrangler Unlimited Rubicon
2016 Jeep Wrangler Unlimited Sahara
2016 Jeep Wrangler Unlimited Sport
2016 Jeep Wrangler Unlimited Sport S
2017 Jeep Wrangler Rubicon
2017 Jeep Wrangler Sahara
2017 Jeep Wrangler Sport
2017 Jeep Wrangler Unlimited Rubicon
2017 Jeep Wrangler Unlimited Sahara
2017 Jeep Wrangler Unlimited Sport
2018 Jeep Wrangler JK Rubicon
2018 Jeep Wrangler JK Sahara
2018 Jeep Wrangler JK Sport
2018 Jeep Wrangler JK Unlimited Rubicon
2018 Jeep Wrangler JK Unlimited Sahara
2018 Jeep Wrangler JK Unlimited Sport

Air Freight Prohibited: false
Not Carb Approved: false
Carb Acknowledgement Required: true
Ltl Freight Required: false
Prop 65: Y
Part Type: automotive
Epa: N/A
Regular Stock: t
Units Per Sku: 1