MBRP S5240BLK Armor BLK Cat-Back Exhaust System for 2011-2013 Ford F-150 2.5-Inch Dual Split Rear Exit

STYLE THAT'S WORTH A SECOND LOOK - ARMOR BLK Series exhaust systems crank your vehicle’s style dial to 11. The ARMOR BLK series offers the same performance as the other series with an engineered, high-heat black powder coating on the tailpipe(s) and tip(s). Manufactured using heavy-gauge Aluminized Steel tubing throughout the whole system, everything but the tailpipe and tip are left as mill-finish steel for better resistance of damage under your vehicle. This material can be a great choice for you if you live in a dry climate that doesn’t see much precipitation. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. The black powder coating features a 1-year warranty against factory defects, and the remaining parts feature an industry leading 3-year warranty. MBRP, Stand out from the crowd with a performance exhaust system that sounds great. Armor BLK Cat Back Exhaust System; 2.5 in.; Incl. Front Pipe/Ext. Pipe/Muffler/Over Axle Pipes/Tailpipes/Hardware/3.5 in. OD Tips; Dual Split Rear Exit; Black Coated; 3.5in Outside Diameter Tips Included. Excludes Extended Cab with 8' Box.

• Black Coated. Fully Sealed Seams for Rust Resistance. Bolt-on Installation. MBRP Signature Styling and Sound.
• Stainless Steel Tips Are Included
• Improved Torque And Horsepower
• Lower Exhaust Gas Temperatures
• 3 Year Warranty On The System
• 1 Year Warranty On The Finish
• Increased Throttle Response
• Utilizes OEM Hangers
• Mellow Exhaust Note
• Bolt On Design

Give your Ford F-150 a refined appearance and stronger exhaust performance with the MBRP S5240BLK Armor BLK cat-back exhaust system. Designed for select 2011-2013 F-150 applications, this system uses heavy-gauge aluminized steel tubing with a high-heat black powder-coated finish on the tailpipes and stainless steel tips. The dual split rear exit layout adds distinctive MBRP styling while maintaining a clean, professional appearance.

Mandrel-bent tubing promotes smooth exhaust flow by reducing restrictions through the bends. The result is improved throttle response, increased torque and horsepower potential, lower exhaust gas temperatures, and a mellow exhaust note. Fully sealed seams help resist corrosion, while the bolt-on design uses OEM hangers for straightforward installation without extensive fabrication. The system includes the front pipe, extension pipe, muffler, over-axle pipes, tailpipes, hardware, and 3.5-inch outside-diameter tips.

The MBRP S5240BLK is backed by a 3-year warranty on the exhaust system and a 1-year warranty on the black finish against factory defects. This system is not intended for extended-cab models with an 8-foot bed. Verify vehicle configuration, cab style, bed length, engine, and exhaust routing before ordering. This product is not CARB approved and may not be legal for use on pollution-controlled vehicles in certain jurisdictions. California emissions requirements may apply.

What's Included

• Front pipe
• Extension pipe
• Muffler
• Over-axle pipes
• Tailpipes
• Stainless steel exhaust tips
• Installation hardware

Fitment

Fits select 2011, 2012, and 2013 Ford F-150 models, including compatible V6 EcoBoost configurations. Excludes extended-cab models with an 8-foot bed. Confirm exact vehicle fitment before purchase.

Features:

• Black Powder-Coated Finish: High-heat black coating on the tailpipes and tips provides distinctive styling and helps protect the finished components.
• Mandrel-Bent Tubing: Smooth, restriction-reducing bends support efficient exhaust flow and improved engine breathing.
• Performance Improvement: Helps increase throttle response and supports gains in torque and horsepower while lowering exhaust gas temperatures.
• Bolt-On Installation: Includes the required exhaust components and hardware, uses OEM hangers, and is designed for a direct-fit installation.

Fitments:
2011 Ford F-150 FX2
2011 Ford F-150 FX4
2011 Ford F-150 King Ranch
2011 Ford F-150 Lariat
2011 Ford F-150 Platinum
2011 Ford F-150 XL
2011 Ford F-150 XLT
2012 Ford F-150 FX2
2012 Ford F-150 FX4
2012 Ford F-150 King Ranch
2012 Ford F-150 Lariat
2012 Ford F-150 Platinum
2012 Ford F-150 XL
2012 Ford F-150 XLT
2013 Ford F-150 FX2
2013 Ford F-150 FX4
2013 Ford F-150 King Ranch
2013 Ford F-150 Lariat
2013 Ford F-150 Limited
2013 Ford F-150 Platinum
2013 Ford F-150 XL
2013 Ford F-150 XLT
2014 Ford F-150 FX2
2014 Ford F-150 FX4
2014 Ford F-150 King Ranch
2014 Ford F-150 Lariat
2014 Ford F-150 Limited
2014 Ford F-150 Platinum
2014 Ford F-150 XL
2014 Ford F-150 XLT

Air Freight Prohibited: false
Not Carb Approved: false
Carb Acknowledgement Required: true
Ltl Freight Required: false
Prop 65: Y
Part Type: automotive
Epa: N/A
Regular Stock: t
Units Per Sku: 1