MBRP S5340409 Armor Plus Cat-Back Exhaust for 2016–2017 Toyota Tacoma 3.5L

RELIABILITY BACKED FOR A LIFETIME - ARMOR PLUS Series exhaust systems are crafted from corrosion-resistant T409 Stainless Steel - a value-oriented material designed to protect from penetrating rust and will stand up to almost anything you can throw at it. T409 Stainless Steel tubing is easy to clean. If you’re looking for a performance exhaust system with a Lifetime Warranty, this is probably the one for you. If you don’t find yourself faced with lots of precipitation and salt, this is all you’re ever going to need. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engine’s cylinders, allowing it to produce more power and improve vehicle performance and longevity. It's important to note that T409 Stainless Steel is resistant to penetrating rust but winter conditions, heavy salt air, and road treatments might accelerate the corrosion process, these conditions are not covered by MBRP's manufacturer warranty unless the part or system fails completely. When it comes to a performance exhaust system, choose the MBRP ARMOR PLUS Series for a reliable option backed for a lifetime. MBRP, Stand out from the crowd with a performance exhaust system that sounds great. Armor Plus Cat Back Exhaust System; 3 in.; Incl. Ext. Pipe/Muffler/Tailpipe/Hardware/4 in. OD Tip; Dual Split Side Exit; T409 Stainless Steel; 4in. Outside Diameter Tips Included.

• Rugged T409 Stainless Steel Construction. Bolt-on Installation. MBRP Signature Styling and Design.
• Stainless Steel Tips Are Included
• Improved Torque And Horsepower
• Lower Exhaust Gas Temperatures
• Increased Throttle Response
• Limited Lifetime Warranty
• Utilizes OEM Hangers
• Mellow Exhaust Note
• Bolt On Design

Upgrade your 2016–2017 Toyota Tacoma 3.5L with the MBRP S5340409 ARMOR PLUS cat-back exhaust system. Designed for reliable performance and long-term durability, this system is constructed from corrosion-resistant T409 stainless steel and features mandrel-bent tubing for smooth exhaust flow. The dual split side-exit configuration provides a clean, purposeful appearance while delivering a mellow exhaust note.

The MBRP ARMOR PLUS system is engineered as a direct bolt-on replacement that utilizes factory exhaust hangers for a straightforward installation. Improved exhaust flow can support stronger throttle response, increased torque and horsepower, and lower exhaust gas temperatures. The system includes stainless steel exhaust tips with a 4-inch outside diameter for a finished appearance and signature MBRP styling.

T409 stainless steel resists penetrating rust and is easy to clean, making it a practical choice for many driving environments. However, winter conditions, heavy salt air, and road treatments may accelerate corrosion and are not covered by the manufacturer warranty unless the part or system fails completely. The MBRP S5340409 is backed by a limited lifetime warranty for added ownership confidence. This product is not CARB approved; verify emissions requirements before installation where applicable.

Key Product Specifications and Technical Data

• Brand: MBRP
• Part Number: S5340409
• Series: ARMOR PLUS
• System Type: Cat-back exhaust system
• Material: T409 stainless steel
• Configuration: Dual split side exit
• Inlet Tubing Size: 3 inches
• Exhaust Tip Size: 4-inch outside diameter

What's Included

• Extension pipe
• Muffler
• Tailpipe assembly
• Stainless steel exhaust tips
• Installation hardware

Fitment: Fits select 2016–2017 Toyota Tacoma models equipped with the 3.5L engine. Confirm cab configuration, drivetrain, and existing exhaust layout before ordering.

Features:

• T409 Stainless Steel Construction: Corrosion-resistant material provides dependable durability and easy cleaning for everyday use.
• Mandrel-Bent Tubing: Smooth, ripple-free bends promote efficient exhaust flow and support improved vehicle performance.
• Performance Improvements: Designed to help increase throttle response, torque, and horsepower while lowering exhaust gas temperatures.
• Direct Bolt-On Installation: Uses OEM hangers and includes the required exhaust components, hardware, and stainless steel tips for a streamlined installation.

Fitments:
2016 Toyota Tacoma Limited
2016 Toyota Tacoma SR
2016 Toyota Tacoma SR5
2016 Toyota Tacoma TRD Off-Road
2016 Toyota Tacoma TRD Sport
2017 Toyota Tacoma Limited
2017 Toyota Tacoma SR
2017 Toyota Tacoma SR5
2017 Toyota Tacoma TRD Off-Road
2017 Toyota Tacoma TRD Pro
2017 Toyota Tacoma TRD Sport
2018 Toyota Tacoma Limited
2018 Toyota Tacoma SR
2018 Toyota Tacoma SR5
2018 Toyota Tacoma TRD Off-Road
2018 Toyota Tacoma TRD Pro
2018 Toyota Tacoma TRD Sport
2019 Toyota Tacoma Limited
2019 Toyota Tacoma SR
2019 Toyota Tacoma SR5
2019 Toyota Tacoma TRD Off-Road
2019 Toyota Tacoma TRD Pro
2019 Toyota Tacoma TRD Sport
2020 Toyota Tacoma Limited
2020 Toyota Tacoma SR
2020 Toyota Tacoma SR5
2020 Toyota Tacoma TRD Off-Road
2020 Toyota Tacoma TRD Pro
2020 Toyota Tacoma TRD Sport
2021 Toyota Tacoma SR
2021 Toyota Tacoma SR5
2021 Toyota Tacoma Trail
2021 Toyota Tacoma TRD Off-Road
2021 Toyota Tacoma TRD Pro
2021 Toyota Tacoma TRD Sport
2022 Toyota Tacoma Limited
2022 Toyota Tacoma SR
2022 Toyota Tacoma SR5
2022 Toyota Tacoma TRD Off-Road
2022 Toyota Tacoma TRD Pro
2022 Toyota Tacoma TRD Sport
2023 Toyota Tacoma Limited
2023 Toyota Tacoma SR
2023 Toyota Tacoma SR5
2023 Toyota Tacoma Trail Special Edition
2023 Toyota Tacoma TRD Off-Road
2023 Toyota Tacoma TRD Pro
2023 Toyota Tacoma TRD Sport

Air Freight Prohibited: false
Not Carb Approved: false
Carb Acknowledgement Required: true
Ltl Freight Required: false
Prop 65: Y
Part Type: automotive
Epa: N/A
Regular Stock: t
Units Per Sku: 1