Mishimoto misMMTH-TAC-24-RBK Rear Recovery Points for 2024+ Toyota Tacoma - Black

The 2024+ Toyota Tacoma does not ship with rear recovery points from the factory - the rear of the vehicle has no dedicated anchor for vehicle extraction. The Mishimoto Rear Recovery Points add that capability: forged alloy steel hooks with a rated Working Load Limit of 18,500 lbs each, engineered for the full range of modern recovery hardware from d-ring shackles to soft shackle rigging.----Forging aligns the grain structure of the alloy steel, delivering tensile strength that resists bending and cracking under dynamic recovery loads where cast or stamped hooks give way. Each hook is finished with a two-stage corrosion system: an electrogalvanized base layer seals the forged steel before a powder coat topcoat is applied, blocking moisture and salt at the base metal where surface-only finishes fail over time. Bolt heads are recessed flush within the mount profile, eliminating the hardware exposure that shears against rocks, ledges, and brush on the trail. Every fastener is black dacromet-coated - the same protection level as the hook body - preventing rust migration and seizing at the mounting interface.----The hardware kit includes the washers required to reinstall the factory OEM drop-down step, so you don't have to choose between a rear recovery point and the step you rely on for cab access. Available in powder coat black or red. Direct fit for the 2024+ Toyota Tacoma with no drilling, cutting, or modification required.----For complete front and rear recovery capability, pair with the Mishimoto Front Recovery Points (MMTH-TAC-24-F), rated at 18,500 lbs WLL each and built with the same forged alloy steel construction for the front bumper mounting location. Backed by the Mishimoto Lifetime Warranty. High-performance component engineered for durability, efficiency, and reliable operation under demanding conditions. Designed to support optimal system function across a wide range of automotive applications.

• OEM drop-down step preserved with included washers - the hardware kit ships with the washers required to reinstall the factory step, so you keep cab access on the 2024+ Toyota Tacoma without choosing between utility and recovery capability.
• Rated at 18,500 lbs working load limit each - forged alloy steel construction delivers the extraction capacity for full-size vehicle recovery on technical terrain, where under-rated recovery points fail at the worst possible moment.
• Recessed bolt heads eliminate a shear point - flush-mounted fasteners sit below the surface, removing the hardware exposure that shears bolt heads on rock and trail contact.
• Two-stage coating protects the whole assembly - electrogalvanized steel and dacromet-coated hardware block moisture and salt at the body and every fastener.
• Forged alloy steel resists bending and cracking - forging aligns the metal’s grain structure for greater tensile strength than cast or CNC alternatives.
• Accepts both d-ring and soft shackles - the opening geometry works with steel or synthetic rigging hardware without modification.
• Own it for life - backed by Mishimoto’s Lifetime Warranty, your investment is protected long after install day.

Add dedicated rear recovery capability to your 2024+ Toyota Tacoma with Mishimoto Rear Recovery Points. The forged alloy steel hooks are rated to an 18,500 lb working load limit each and are designed for use with d-ring shackles and soft shackles. Direct-fit installation requires no drilling, cutting, or vehicle modification.

Forged construction aligns the alloy steel grain structure for tensile strength that resists bending and cracking during dynamic recovery loads. A two-stage corrosion protection system combines an electrogalvanized base layer with a powder coat topcoat, while black dacromet-coated fasteners help protect the mounting interface. Recessed bolt heads sit flush within the mount profile to reduce hardware exposure during trail use.

The included hardware kit contains the washers required to reinstall the factory OEM drop-down step, preserving cab access. These black recovery points are backed by the Mishimoto Lifetime Warranty. For additional recovery capability, they can be paired with Mishimoto Front Recovery Points, part number MMTH-TAC-24-F.

Key Features & Performance Benefits

• Forged alloy steel construction resists bending and cracking under dynamic recovery loads.
• 18,500 lb working load limit per recovery point supports demanding vehicle extraction applications.
• Compatible with d-ring shackles and soft shackle rigging.
• Recessed bolt heads and two-stage corrosion protection improve trail durability and mounting protection.

Product Specifications & Technical Data

• Brand: Mishimoto
• Part Number: misMMTH-TAC-24-RBK
• Product Type: Rear recovery points
• Vehicle Application: 2024+ Toyota Tacoma
• Finish: Black powder coat
• Material: Forged alloy steel
• Working Load Limit: 18,500 lbs each
• Warranty: Mishimoto Lifetime Warranty

What's Included

• Rear recovery points
• Mounting hardware kit
• Washers required to reinstall the factory OEM drop-down step

Fitment

Fits 2024, 2025, and 2026 Toyota Tacoma models.

Fitments:
2024 Toyota Tacoma Trailhunter
2024 Toyota Tacoma TRD Off-Road
2024 Toyota Tacoma TRD Pro
2025 Toyota Tacoma Trailhunter
2025 Toyota Tacoma TRD Off-Road
2025 Toyota Tacoma TRD Pro
2026 Toyota Tacoma Trailhunter
2026 Toyota Tacoma TRD Off-Road
2026 Toyota Tacoma TRD Pro

Air Freight Prohibited: false
Not Carb Approved: false
Carb Acknowledgement Required: false
Ltl Freight Required: false
Prop 65: Y
Part Type: automotive
Epa: N/A
Regular Stock: t
Units Per Sku: 1